Reviews
Rninet Back Mirror
I chose this model because of its design, and I was interested in replacing the OEM's Mirror, which looked like it had been stretched a long time. It is lightweight. There is a little bit of rattling in the connection area, which I will be taking countermeasures for as it is not cured by tightening the bolt. The blue mirror surface reduces the glare from the headlight of the following car, but the rearward vision is a little worse because of the design. And it is easier to remove and reassemble at Circuit because it is easier to remove and reassemble than OEM. View detail
prompt return
The product arrived but Mirror back and front Wound in several places.
I don't want to buy and use a product full of Wound.
Returned immediately.
View detail
Small and good
The quality is high and solid.
The moving parts of the ball joint are not wobbly as you move them around.
The Mirror does not tilt while running because it has a firm grip feel.
Mirror surface is a bit Blue, so
It is easy to see, but rearward visibility is not good because Mirror itself is small.
It is a good product because it does not shake while driving.
View detail
A fraudulent product!
This is not a Level product that should be handled Even more so because I trusted this Site
It has fingerprints and scratches, and the packaging is MirrorMatte only
There is no Package No matter how much it is CHINA, there is no such thing
Do the buyers know how to handle it, or is the Rubber frame around the Mirror partially floating around, too? I did
View detail
Disappointed
I waited for expectation, but when it reached and opened, dirt like rust, Stainless Steel of Reverse side of Mirror had fingerprint sticky. In addition, the more difficult it is to adjust the angle of Mirror, the more Mirror does not move. I am amazed beyond anger. View detail
Fake items. All disappointed
I received a bad quality. I not a new brand name as i think. I think i used or the worst things. All disappointed. How can i return it? View detail
Fits: SUZUKI BANDIT250, SUZUKI BANDIT , KAWASAKI BALIUS
Below the price?
I was looking for a shape, it was Don Pissha, I was dazzled by the price and bought without thinking.
Initially "1 pc. I thought that it was the price of "minute", so when I popped into the shopping cart I inadvertently saw it twice.
As price is price, as soon as I got the actual thing holding secret anxiety, curiosity and faint expectation, that's too light "Even if you do it" I thought.
Mirror Body's Material is Plastic ...
In the item description of the web is "Material : There is "Plating", but ...
Arbitrarily "Plating of Aluminum" I interpreted as being wrong.
Plating is also uneven as the border of Mirror surface gets thinner at some places.
There is BALI on the Reverse side, and Plating is peeling off. In addition it says something in something inside.
Personally I like Round mirror of Large texture and good visibility.
Bracket is made by Gold Genotype and Plating processing is done.
This lightness is absolutely rattled by vibrations and wind pressure and it will be inadvertently invisible, and the Joint part is enough to feel stupid immediately by wind pressure.
It is good to be cheap a little, rear confirmation is adequate for Mirror to decorate it, it is a recommendation for those who aim for weight reduction even with 1 Gram.
View detail
Good durability.
It is about 7 years since I began using it, but I am using Mirror 's reflection, Others, without any problem. When this Mirror arrived painting was bad and terrible, it was not very easy to put on as it was, so I bought a cheap frosted black at Home center and Re-paint it.
View detail
If only Design, it is GOOD ...
I installed it in VT 250 INTEGRA.
Design and the backward perspective are really nice!
However, there were several disappointing things when I looked at various things after it arrived.
(1) LeftMirror has a Large Kick
Since the packaging was solid, I think that it is a wound that was attached before packaging. Although it became not noticeable in the distant eyes after cleaning it .... "Open as soon as possible to confirm and confirm" It is important that. (I opened it in a week after it arrived w)
(2) The moving part is quite heavy
First of all, it was almost impossible to adjust the angle of Mirror in a straddling state. It is quite troublesome to adjust it while getting off the vehicle and holding Arm.
(3) Can not collapse
It is Mirror which uses very wide width, so I could not fold it up. There is no other way to fold it once you loosen the branch's Screw.
Made in China sometimes is cheap and it may be unfamiliar at first, but it seems necessary to get used to gradually. Recommendation to buy with the preparedness that there are some Risk (; '∀ `)
View detail
It looks better
I attached it by saying that it is cool to put it in a low position with Small Type.
The appearance will be clearer.
Rigidity is pretty good, although it blurred while driving, it can be confirmed backward.
In addition, because the angle does not change with running wind, it is practically problem-free.
Since it can also be adjusted so that there is less overhang than Handlebar, I feel it has become easier to pass through.
In terms of making details, compromise is necessary, but you can recommend it for those who do not mind the details.
View detail
I did it.
I bought the original attachment for a while and feel a sense of incongruity after seeing it for a while
... No Mirror!
OEM search was also troublesome so it was cheap but I bought it here ... but Screw was different.
The new standard of AF 67 TODAY is both Opposite Thread Screw for Normal Thread Screw Data of the same product. I believed that it was written that I can not go.
There is nothing wrong with the quality. I will buy Normal Thread Screw again.
View detail
Fits: HONDA Today, HONDA MONKEY, HONDA MAGNA50, HONDA JOKER Helmet, HONDA JAZZ, HONDA GYROX, HONDA GORILLA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA APE 50, HONDA APE 100
In the end of the mistake
I inadvertently bought Mirror from Opposite Thread Screw, bought back Normal Thread Screw's one.
Because it was somehow to buy the Adapter ...
I finally got on riding. Afterwards if you take even Number.
View detail