Reviews
Only the positioning bothers me.
In the meantime, I am worried about positioning.
The Tank itself is rounded, From this line ??mm" It is difficult to decide on something like Quantity:Pair (for Left and Right) I thought I had it exactly in the same position, but when I straddled it after applying it, it was a little Quantity.:Pair (for Left and Right) There's a difference … and so on.
The center part is aligned from the end of the Seat and overlaps the logo mark, so the back part is aligned from the front of the vehicle and placed under the Seat.
I think if a simple positioning jig or something was included, I would have been able to apply it accurately without worrying.
In terms of performance, it is quite Good thing you put it up." Before I put it on, my feet used to slip off the tank even if I did a knee grip, but after I put it on, I can do a firm knee grip and it is very good.
I thought the Black Rubber on the Silver Tank would stand out, but personally I think it looks rather better with a bit of Accent.
I wrote about the pasting, but overall I am satisfied with it.
View detail
Good thin
It is expensive but well made.
It's not Decoration bumpy like Stomp Grip, so it doesn't hurt even if you wear thin clothes.
I use it in CircuitMain, so I use Leather suit to grip my knees, but it is very effective in preventing slipping.
It is even thinner from XL to XL2, so it is more user-friendly.
View detail
Stable knee grip.
I bought this for the R1250RT and Tank Pad as well as to prevent scratches on the Tank Part, as it is the only type of car that can only be machined Universal Product.
I bought two this time to cover a large area. It turned out to be quite a Gold amount….
Nevertheless. XLine." The grip force of the "Grip" is high, allowing for a stable knee grip and secure inner thigh placement.
The surface is textured like #320 Sandpaper, but unlike Sandpaper, it is naturally not shaved, so there is less damage to the Wear.
Also, the base is about 6mm thick urethane, so the fit is good. If it were skin, the impression would be hard.
Repositionable. The disadvantage is that the adhesive strength drops considerably once it is peeled off, and it is easy to peel off if it is not degreased properly even the first time. Also, be careful not to peel off the adhesive too tightly.
It is better to use a thick blade even with a Cutter Knife.
View detail
It's not so bad!
The texture is very luxurious! The feel is also very good. View detail
Makes it more comfortable to keep the chin down when tucked.
Having your chin on the tank is very vibration heavy and this helps minimize that when trying to stay tucked unter a bike's windscreen. Might not be a perfect fit due to the shape of your bike's tank, but the adhesive and the softness of the material make it easy to stick. View detail
Focus on function rather than appearance.
Having used TECSpecifications on my previous Versys 650, I had no hesitation in going with TECSpecifications on the MT09sp.
Grip is good enough for Circuit.
It's also Exactly because it's cut specifically for your car model.
I know many people don't like the black look, but a transparent Pad is more likely to show dirt. Also, TECSpecifications will not peel off even in the summer.
It's easy to apply.
After degreasing the parts with PartsCleaner, simply position them with masking tape and stick them on.
The Grip Pads on the SIDE were good, but the Tank Pad was too long, so I had to cut it to fit.
View detail
It's going to be a tight grip
The SCRAMBLER 800 had a slippery knee grip, so I bought a Tank Pad
I thought Design was great!
I don't know if the price is low or high I bought it without comparing it to others
Tank Pad is for the middle part and both SIDE parts, and I bought it for knee grip, so I can use it for both Installed for SIDE portion only
Impressively, it looks like you can get a pretty chunky knee grip
View detail
It works as expected
I have installed a high seat on the K1300S
This high seat slopes forward
So I bought it with the purpose of improving my Grip strength
It was installed with Dryer while warming it up in season
And today I ran it, and it felt just as grippy as I'd hoped
Help prevent slips!
View detail
high
I'm very happy with the functionality, I'll be putting it on whenever I buy a motorcycle, even in Jeans The design is also simple and easy to use I think it will match any motorcycle But it's still expensive View detail
techspec
Very convenient gas tank cover. Using the side covers, I decided to install the central cover for the sake of completeness. material - rubber with a thickness of about 4mm, the pattern allows you to better grip the gas tank. the installation is very simple. PS: I am very pleased with the purchase of the Very comfortable pad on the gas tank. I use the side covers decided to complete the picture, and set the center plate. material - rubber about 4 mm thick, drawing allows to hold the gas tank better. installation is very simple. PS: I am very pleased with the purchase (translated by Google Translator) View detail
To your own form
Mounting on Kawasaki EX-4.
Because there is no dedicated Pattern like a popular car because of Minor car, we need to clip this Universal Product by yourself. Contents are two Knee grip parts (Quantity : Pair (for Left and Right) Quantity : 1pc. Tax Pad min Quantity : 1pc. There are 3 pieces in total.
Also, I was worried about how to clip it, but politely the pattern paper entered about 8 Pattern, Copy the fixed form and make both sides.
Left clipped from the pasting surface, Right from the pad surface side and cut out. I was able to be good at 100 Universal Scissor. Then clean up Tank with Parts cleaner, paste it and finish it.
OEMSeat slips anyway, so the body moves before Breaking. With this GripSeat, it will be much better.. (Seat's slippery one will be reassigned)
I used it even at the time of 6R, but I can hold it with confidence without slipping on a thin Pants. It is recommended that you can hold Hold with confidence because there is a feeling that it is griping even in Pants of the thick ground!
By the way there are plenty of cutouts left, but if you are dissatisfied with Knee grip, you can get through with additional, so I will set aside.
View detail
Just paste.
I attached CLEVERWOLF's Tank protector, I pasted it, but there was a place to suffer slightly.
After a while, since it got floating from the part to be covered, since the adhesive strength disappeared, peel off, wash it, then reinstall it, there is nothing to float afterwards.
I firmly grip, so driving has become easier.
View detail
It is a good item
I was worried that it could be stuck on a curved surface because it was hard and thick, but because it has more flexibility than it looks, it could be pasted without floating. It seems that even if you do not stick the dust etc. exactly and degrade it stickiness does not fall. View detail
I will not slip when hanging off!
When I hung off, I bought it because I felt quite scary because the peach part of the leather bread and Tank slipped.
The decisive factor of purchase is the place where you can hear again.
In best positioning, we have re-tensioned about 3 times on our side.
It is extremely difficult to position with one time, so I think that it was very good to purchase this item that will re-tension (I regret that I should have bought sooner).
While hanging off, I was reapplying it, but this product never shifted, leather bread did not slide at all, Position was stable and able to turn to Smooth, I was impressed.
Moreover, because it made it to SnakeSkin, it is very satisfying without aggressiveness to leather bread.
Center Pad also seems to be a little useful for the protection of the Large thighs because the range is large and the thickness is also large.
Those who ride a SS going to a pass or a circuit, we recommend purchasing by all means.
View detail
Pants do not slip when hanging off.
When hanging off, Riding Pants hitting Tank slid and scared, so I bought it.
The good part of this product is where the re-tension is good.
When pasting, Quantity : Pair (for Left and Right) It is quite difficult to paste the position symmetrically, it is necessary to reposition fairly well and it can be repasted very much and it was extremely saved.
If you do degreasing with the Silicon-off around the pasting position of Tank, it will be hard to peel off. If there is no contamination of Air slowly sticking from One Side you can paste without problems.
After trying the test run after pasting, the contact surface of Pants did not come to the best position against Pad, and the paste was twice repeated on the road. Riding at the best position was confirmed that there was not too much aggression against Pants without slipping, so it was a very satisfying product because we can concentrate on Riding without scary feelings in the future.
However, as long as the price is cheaper a little, we decided to set COSPA to 4.
View detail
I'm glad I bought it.
? 【What made you decide the purchase?】
It was that it was dedicated to the car model and the friend's reputation was good..
? 【How was it actually used?】
It's better than I expected. Because Motorcycle is Black, it is not noticeable, "I have a bad day," It is often said.
? 【Was it difficult to install? (Hard parts case)】
It's super simple as it just pastes.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
The position to paste is Quantity : Pair (for Left and Right) I wanted to make it symmetrical, so I decided the position in advance with Masking tape.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
I do not slip and it does not hurt even with G bread. However, it is good that Pants will not be strangely pulled.
? [Is there anything I was disappointed about?]
None.
? [Request to Manufacturer - Please let me know if you have any improvement points]
Tank, Tank Under Cover Total Quantity : 1 Set of 4pcs. , But I do not need the Tank Department.
? 【Have you compared items?】
This product's high FUSION, Comfort.
? [Others]
Purchase SnakeSkin. There is no problem such as town riding, Touring, pass etc..
High pass Corner was comfortable in many places where there were many turnovers and turnovers, and the Knee grip gave a sharp contrast.
Two leftover pieces from the Tank section were attached to Gamma. Knee sliding rolling when riding Gamma except leather bread
(To Tank instead of Road) It's just fine as it's dangerous (^^) /
** Because polishing Tank with Plexus makes it slippery (Lol)
It will be about a year, but there is nothing like peeling off at all. It is a good item.
View detail
Fits: KAWASAKI NINJA ZX-6R 636
It's hard to slip and Design is also good
Discovered when I think that transparent Iboibo looks a little disappointing and touching, buys SnakeSkinType.
It is not too soft, and it does not mean not to grip but just a good feeling of Fit. It was easy to match the shape to the body line of Motorcycle, and it was inconspicuous due to the carnage's blackness.
Just because Knee does not slip it is quite comfortable to ride and fun.
View detail
SnakeSkin for sparrow bee 900 Knee Grip Pad
Usage applications include city riding, Touring, somewhat hard pass attack.
I previously used the rough AndRoad Universal Product, but here the bonded surface peeled off quickly and there was a difficulty in durability. It was cheap so it was suitable for the price.
Will it be able to experience the effect, is it a pass attack.
Leather suit Even if you do not wear it, you can feel that it is solidly done Hold.
Also, the looks became tightened impression, even NORMAL, feeling that it is a bit different if it is attached.
Although it is durable to worry, I think it seems to keep quite good, firm making.
Good thing is that it's a reasonable price.
At the time of a corn Ring mistake, thanks to this Hold feeling, I prevented an accident.
Control nature, it can be said that it is an essential item to obtain a sense of unity.
However, it took about a month from order to delivery.
Maybe it's a Minor car, but ....
View detail
Perfect fit
The feeling of comfort in the part corresponding to your body is the best.
With this, Wank will be hard to make in Tank.
It is likely to reduce the Damage of two My Tank.
View detail
Together with Slider when delivered
It's been a long time since I got on the Motorcycle that I needed for Knee grip, I wanted a Grip that also hits my thighs.
Result Large Correct answer.
As expected, I need this solid Pad for the necessary Motorcycle of Knee grip.
View detail