Reviews
It needs to be shifted a little and put on the 2024 CBR600RR.
2024 CBR600RR compatible products (?) but it hits in the search results as
The shape of the knee side is slightly different, so it needs to be shifted and applied.
The glue was coming off a little bit, but other than that, I'm satisfied!
View detail
f900xr Fits
Cover the part that takes Rider and Contact. The texture of the rubber is good, and the adhesive tape, which can be reapplied, is also very good. The size is a bit large, so I prefer it that way. It is good that it does not get scratched. View detail
feel well
It's nice. It's not cheap and has the right texture.
If you put it on the curved surface of the tank, it will come off, so we recommend you to fix it firmly with strong double-sided tape of 3?etc.
View detail
Good-looking is a Large thing.
I installed it on 2020 YZF-R1.
warp and woof
R1 is a five-piece Quantity:The Tank Pad of the Set is already out, and I bought it, and Quantity:Pair (for Left and Right) I had already installed the Tank Pad on my ZX-6R, but I decided to use the Tank Pad for the Center part, so I bought it again and put it on the Center.
good point
It is thick and has a reliable performance as anti-slip.
I used to run Circuit back in the days of the ZX-6R, and even after 6 years, I was able to use it without having to replace it once because it never peeled off or lost performance.
I'm not worried about durability at all.
A bad point
Well, there is nothing special about it, but if I had to say something, I would say that the size is universal, so it may not necessarily fit the tank shape of your motorcycle.
In fact, it was a little difficult to put it on the tank shape of R1, but it's okay because it's cool.
After that, you may feel some Oil smell at first.
However, the smell will disappear within a month or so, so I don't think you need to be that nervous.
View detail
Size does not match for TL 1000 S
Even if the price is a little too high, it is quite tough that the dimensions do not match and protrude from the recessed part of Tank and peel off from the part of the Rear surface.
It seems to be TL common design, is it because Tank shape is different between TL 1000 R and TL 1000 S.
I think that it is better to buy Universal Product if honest processing is necessary.
I'm satisfied with the Grip ability, Knee grip works well on jeans.
View detail
Cut's Sense is important - - -
I had the SS stuck in the store.
The labor cost is also taken, but if it fails and buys back this high Seat ... thinks with the power of the working people (Bitter smile)
Stomp Grip hurts Denim who rides also does not need the function to that far ....
Also looks better than Stomp like SUPERBall was flying this way.
It is also recommended for beginners as footpeg position adjustment makes it easier to use even if there is no gold and image that knee is easy to attach. (I am a beginner who just took a street)
Grip, footpeg, Tank Pad, before this look and remodeling like the Exhaust System and Anodized it became harder to get tired and it became easier to understand the sense of unity with the car body.
I think that it is Items that you want to consider first.
View detail
This product is only in the middle.
Quantity : Pair (for Left and Right) Tank Pad is sold separately. Inevitably Quantity : Pair (for Left and Right) Also purchased at the same time. I made it to SnakeSkin so it's quite Parenthesis yeah. Just Quantity : Pair (for Left and Right) Hitoshi etc. , It is confusing to put it out from the Center and paste it, but since it can be repositioned, there is no problem. View detail
It is quite a good product
Since it can be repositioned, positioning is easy, feeling touch Grip is also good. However, the price is high, Neck. Instruction Manual is not included but it will not be necessary. View detail
good
Apart from the feeling that there was a little thickness, I thought that Grip is also a good product. I feel convenient that re-tension is useful. After that, I wonder if the price is a little lower. View detail
It is largely satisfactory
It is a good shape for MT07.
You can re-tension it as many times as you can ○
Town ride 7 pass 3 If it is just OK.
I'm a bit scared of theft.
View detail
Grip has no problem
quality : Quantity : Pair (for Left and Right) With some shape difference.
Performance - function : Grip force is no problem.
Feeling of use : It will be easier to maintain posture even with a strong Brake. Knee grip assistance.
Design : Cool
Cost performance : To the price, quality is not good.
★ 2015 It is a product for MODEL, but it can be used even in 2017.
★ I repositioned it several times for position adjustment, but it can paste without problems.
View detail
Excellent Grip feeling
As for the owned Z250 Matte painting, because of Mr. knee grip Tank 's expertise is concerned and it became this commodity as a result of thinking whether there is something good, choosing the type of conference in case of town riding & touring being the subject I got a reasonable Cushion and Grip feel just right.
By the way, Z250 does not do Hit with this TECSpecifications product search, Hit it when searching overseas MODEL's NINJA 300 !! Of course it can also be used for NINJA 2 Helmet50R.
View detail
Almost satisfied
It is an installation only for impression.
This product was quite thick, so it was the first impression that I could stick it well. As for the result, pasting of the surface also has no problem. If you do not degrease it exactly and do not attach dust, you can reattach it. Indeed, although I tweaked a few times while finely adjusting the position while straddling, I was able to do satisfactory sticking without decreasing the adhesive strength. You can recommend it to those who want something with sharp protrusions like other Manufacturer. The only worry is the durability of the adhesiveness that can be reattached.
View detail
Knee grip can be done with ease!
I think that the strength of the upper body will be good so that the lower body's Grip can be firmly carried out until the city ride ~ Circuit run. Especially since the posture stabilizes in the vertical G at the time of Breaking it will block the intense heat from Tank so Jeans should be able to Grip without burning. But it is no doubt that compatibility is good as leather bread and leather suit suit. The feeling that I pasted is unexpectedly cheap feeling and Black color is moderately good Accent and I personally like it! When pasting it is Silicon-offetc. I think that it will be finished with a good feeling if you degrease properly and stick it and leave it for about 2 days..
View detail
The texture is good!
Occasionally Circuit at Winding + Touring Main. I ran SnakeSkin as I run. Although it is a bad point in the first place ... I do not know the correct orientation as everyone 's impressions, it is unkind to have neither Instruction Manual nor Image pictures, is not it okay for overseas Manufacturer. Since the texture is good, it seems easy to run and it is good to be able to reposition. We are satisfied although the price is expensive. View detail
Ideal for hooking inside
SnookSkin of TECHSPEC has already been pasted on Tank side.
Anyway, when holding a tank at the time of Breaking, I grip you a lot and I find it useful.
Because it was reliable, I immediately buy it when I found Tank protector selling.
I did not buy honest Tank with Wound or something like that.
When it knees, I will hook the inner toe portion of the outer leg to Tank, but by attaching this Tank Pad, it became possible to fix the outer leg more firmly.
Merit by being able to secure the outer leg firmly is very large! A strong feeling was born on the outer leg which I thought that it was fixed until now, and there is no need to use nerve on the outer leg. This is surprisingly Large. A sense of stability that allowed me to focus on where I should concentrate psychologically was more than I imagined.
Also, when the bank angle at the time of turning is insufficient, just taking a little Balance of the body to fold the inner legs somewhat towards the body side and involve Tank on the In side with the outer legs, the turning yaw increases and the guyguyi on the in side I can now bend it. At that time the center to hook the outer leg is the inner thigh and Tank Pad. So it seems that there will be a sense of security that is fixed.
It is a cheap shopping, but it was only when cornering was realized that its real value or usefulness was understood well.
I think that it is Items that can actively utilize not only scratches but also Riding.
Well as a discontent - - - I do not like shape honestly. Since Pad has a considerable thickness, it is difficult to paste according to Tank's Curve. I managed to paste it because it was summer, but I think I'm worried if it will be peeled off even if I warm it up with Dryer in winter...
View detail
Fits: KAWASAKI NINJA ZX-6R 636
One month's use
The position was not decided and I tried repositioning several times, but as of now I have stuck firmly.
It looks pretty good.
Knee grip grips steadily without slipping although it is the essential performance.
I am satisfied with all aspects.
View detail
Good
I thought that it was a little expensive, though I thought it was a good reputation so I purchased SnakeSkin.
There is just inventory, and arrives the next day (I hope it is quick).
Installation is started immediately.
There is only a thing exclusive for the car model and Size is perfect, and installation is completed immediately..
It looks pretty good looking pretty well.
Rubber quality is moderate (Not too hard and not too soft) , Knee also touches very well, the maneuverability dramatically improved with Natural fe Ring (The outer foot side in the Corner does not swell).
(? □ ?) !! ス ー Rose シ イ.
I am ordinary, I wish I bought it sooner (?0?;)
View detail
Tank scratch prevention, slip prevention
I used Leg Back at the time of Touring, but rubbed against the edge Tank of the cord at the time of Knee grip, it got scratched so I purchased it for scratch prevention.
In terms of Universal Product, I made a paperboard with a step Ball and cut and pasted it with Scissors accordingly. Scissors can be crisp. Included Parts : Since various types of paper are contained in it, I think that you can use that paper pattern if its shape matches.
I think that it is unlikely that the sticky feeling is strong, sticky and unexpectedly dislocated or misaligned. However, I think that it is also good to be able to do it by repeating pasting again if you do not mind if you do not eat it as many times as you can paste it again.
The anti-slip of the SnakeSkin handle on the surface was also a high impression because it grips moderately at the Knee grip.
However, because the price is a bit high, I made it to four stars.
However, since I can paste again frequently, I can apply it again and again, I think that I will be able to recommend to those who care about scratches or who want to keep firm Knee grip.
View detail
Being in progress
The image is not my
I did not understand the direction and location well, so please contact us
I got a picture properly. It was easy to paste.
People in the original image I'm sorry
As a reference for those who will buy it in the future
I think that the effect is now but I think that it was good so far
View detail