Reviews
A little processing was required.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
Needs a little work.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
easy
I bought this for the purpose of applying ChainGrease and polishing the wheels, and it works well considering the price, although it does require a bit of effort to rotate the Tire. View detail
This is a great front stand.
This is a great stand for the price.
This is my first time using a front stand. It wasn't difficult to use.
After inserting the adapter that fits your bike into the front hook, hook it on your bike and lift it up.
It's quite sturdy and supports the bike well.
However, care must be taken not to scratch the front fender when using it.
I used it for gsx r1000 and there was no problem using it.
I highly recommend it to others as well. -------------------------------------------------- -------- It is a great stand for the price. I'm the first to use the front stand. It was not difficult to use. Put the adapter that fits the bike in the front ring and put it on the bike. It is quite strong and supports the bike. However, you should be careful not to scratch the front fender when using it. I used it for the GSX R1000, but there was no problem. It is highly recommended for others. Powered by Google Translator
View detail
Unit B2510 front stem-up stand
Tried it on a 2006 cbr600rr. There's no interference with the cowl, but you can't mount it the way you want unless you remove the horn. It interferes with wheel extraction, but try adjusting the height. View detail
Scooter Engine unloading is easy and safe.
I bought this to unload the Engine on my Scooter.
Front tire is fixed with steady STAND and rear frame is hung with 100kgClass Small Type Chain block.
The rigidity is high enough, and there are no problems at all. The construction and precision are high, and the bolt holes are perfectly aligned with the floor.:Pair (for Left and Right) The right angle of the legs of the "Rear" is also out and there is no tilt or rattling of the legs. The weight is not a problem for transportation, but in my case, I have to assemble and disassemble it each time due to the space in Garage, so I am a little concerned about the weight.:Pair (for Left and Right) It would be nice to be able to install the Hook on the
View detail
A little high for Minimoto use.
I was wondering about the step up Type,
Foldable and light enough to be left in the car.
I bought this one so that I can
The height is a bit high for Minimoto use.
Lifting and placing the Motorcycle is quite Large and strange.
You have to lift it up tight when you put it on.
The non-slip Rubber bites into the Under Guard.
STAND is running away from us.
If the leg opening angle can be changed and the height can be altered.
I thought it was nice.
By the way, Rubber smelled like petroleum at first.
After a week or so, it stopped bothering me.
View detail
Easiest to use of all the low-cost Wrench's I've used.
The OEM-supplied wrenches are often just a steel plate punched out with a press, and as you know, they are very difficult to use.
Then, if you ask whether Tool Brand's Wrench is easy to use, it's not so easy... UniversalWrench is often too thick for car use as well.
Motorcycle Accessories Manufacturer For Motorcycle I would say that the thin Wrench is very easy to use.............................! It's as it should be! In many cases, it's not so easy to use!
Wrench size should be different depending on the diameter to be sucked in the first place, so a single Wrench will not work well for everything!
In such a situation, this Wrench is very easy to use despite its cheap steel plate punched out!
Although cheap, the Edge of the Hook part is solid, and is a world apart from OEM tools that slip right off, or the cheap ones that are common.
Rear shock, especially Monoshock, is specially designed to be thick and very easy to turn!
No hitting or anything, Hands only." Can be turned tightly.
Conversely, it may not be suitable for thin shocks such as Twin Shock.
For thick Monoshock
Twin Shock may be easier to turn with Steering head's NutWrench
View detail
A must for anyone going on forest roads.
I bought this for Puncture repair when I go to the woods.
Convenient. That's all there is to it.
With some ingenuity, the front wheels can also be raised.
It is good to have a tube tire equipped no-motorcycle except for touring on forest roads.
I think its original use is for cleaning Chain, so if you don't have STAND, one is very useful.
There are also lifted ones, but they are bulkier and more sturdy due to their simpler construction.
It would be nice if it were a little cheaper, but I don't think it will break that often. If I had to say something, I would say that I wonder how long the Rubber will last.
View detail
StemMaintenance
I purchased a nut removal tool for bearing maintenance of Stem, OEM product is expensive and not used often.
The Torque wrench can be attached to the end of the Torque wrench, so the Torque is large and sturdy.
View detail
Convenient for Torque management!
Used when replacing Rear Sprocket on CRF-125F.
I was having trouble getting my Torque wrench to fit in the gap because the SprocketNut is on the hub side, so I found out about this product and purchased it.
The wrench can be inserted into a narrow space and tightened with a 9.5 insert angle tool.
View detail
For cleaning inside Dust Seal
I use it to clean the inside of dust seals, etc. I am worried about scratches if I pry with a screwdriver, etc. With this, I can shift the scratches on the dust seals to the smallest original size. View detail
Nothing beats Center Stand
I'm having a hard time finding a motorcycle these days that doesn't have a center stand....
I considered the Maintenance Stand, but I wasn't sure about it, so I decided to go with this simplified version.
We also have EasyLift type STAND, but this one is better in that the front tire can be floated.
However, both front and rear tires slide on the roller in a direction other than the direction of rotation, so they do not turn well.
I guess I need to get used to it...
It is much better than nothing, but as the Title says, I miss Center Stand.
Also, there was a small dent on the roller.
It is good because it does not interfere with the operation.
View detail
The construction is good.
I think the construction and texture are good.
However, a little caution is required for use with the z125pro.
It is slight, but it hits the lower side of the Cowl around the Headlight when Lift up.
It doesn't hit me so hard that Cowl might crack, but I am concerned.
We are in the process of fabricating a color or something to address the issue.
Therefore, I gave it a rating of 3 stars in my environment of use.
Functionally, there is no problem at all, so if it is a car model that does not hit anywhere on the body of the vehicle, it is perfect.
View detail
Compatible with various Axle Shaft diameters
I purchased this product in order to disassemble the front fork of KATANA and remove the bottom case. View detail
To MOTARD.
This was the lowest height available for use on MOTARD (DR-Z), which has a low minimum ground clearance.
As shown in the existing Review, the system adjusts the height by rotating the top panel, but there is no way to fix it in place, so it seems somewhat unstable.
The suspension can be lifted under the motorcycle by stepping on it with the foot and lifting it up with the hand, in the same way as applying a center stand. The stepping foot is reversed, though.
View detail
Convenient to have
When making mixed Gasoline
Very safe and visual
It is easy to do the work of mixing liquids.
I'm glad I bought it
Oil Jug is now available in Quantities.:2pc. Set Use
We were mixing them up by transferring them to each other.
This way I can make 5 liters at a time.
Gas vent for expansion is also in the spout.
Caps can be used so that the liquid level can be
I've gained a lot of distance and have no blowback at all.
The oil inlet can be tilted by tilting the tank.
Because Gasoline flows in vigorously through the narrow gap
Mixes well even with hard Oil in a short time
View detail
That was a little bit harsh.
I purchased this for front end maintenance on my Grom.
I expected that, but in the case of the Grom, the light surrounds would have to be removed before it could be used.
It was like... But
Until now, when servicing the front of the car, it had to be raised with a jack or similar device.
I feel totally safe when I see it from there.
Well, I'll just take the lights off.
I can now service it with peace of mind.
View detail
Excellent cost performance.
[How is it used?
I use it with KSR2 and HAYABUSA.
Was the one you received as per Image?
It was smaller than expected.
How was your experience with it?
Chain maintenance is now easier.
[Points to note]
The GSX1300R HAYABUSAClass on Large motorcycles is dangerous for one person. An assistant is required.
(If you are using Front tireSTAND, it is Large sturdy by itself)
View detail
ใช้งานไดเดัสะดวก ไม่ต้องใช้ฆ้อนตอก ไม่เป็นรอย View detail