Reviews
Allows you to turn your Motorcycle around in a comfortable position
I bought it because I wanted to enter the garage from the front of the Motorcycle and park it, then turn it around 180 degrees for the next time I exit (I wanted to keep the front of the Motorcycle facing the garage exit side).
There is a similar product, Motorcycle Moveretc., which is used to lift the rear tire by stepping on it with the foot (by the principle of leverage), but when I tried one owned by a friend, I found that this product was easier to position myself in and moved the motorcycle stably. However, since the Side Stand is dragged, I think it is necessary to use it with STANDRoller for vehicles with LargeEngine Displacement Volume. (The same applies to the Motorcycle Mover.)
In terms of price, it is less expensive than Motorcycle Mover, and the quality is not bad, so we felt that Cost performance is high.
STANDRoller is sold separately, but the Quantity:It would have been better if it was a Set sale.
View detail
Fits: HONDA CR250R, HONDA CR125R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TE125-501, HUSQVARNA TX125
Convenient and lightweight! But low strength
Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft.
View detail
Nothing beats Center Stand
I'm having a hard time finding a motorcycle these days that doesn't have a center stand....
I considered the Maintenance Stand, but I wasn't sure about it, so I decided to go with this simplified version.
We also have EasyLift type STAND, but this one is better in that the front tire can be floated.
However, both front and rear tires slide on the roller in a direction other than the direction of rotation, so they do not turn well.
I guess I need to get used to it...
It is much better than nothing, but as the Title says, I miss Center Stand.
Also, there was a small dent on the roller.
It is good because it does not interfere with the operation.
View detail
Chain Cleaning
I bought this for cleaning the chain and was not sure whether to use STAND or not, but I decided to use this one, which takes up less storage space. I was worried about whether the tire would turn easily until I used it, but it turned perfectly. I was able to clean the Chain without any trouble. The price is cheap and I think it is a good product. I would say it is worth the price. It seems to last for a long time. I forgot to take a picture... View detail
For Tire Cleaning
I bought it to clean the front tire when cleaning the motorcycle.
When you put the front tire on the WheelRoller, if you don't put the front tire on the WheelRoller in the middle of the wheel parallel to the front tire, when you turn the front tire, it will come off from the Rollers.
I have to start over from the beginning. It takes experience, but no matter how many times I try, it's hard to get the pit parallel and right in the middle.
Turning the Tire is awkward and requires a lot of force.
If you do not use the Rear stand, the Motorcycle is leaning and is dangerous.
I always use it for cleaning after Touring, I use it for a long time and it is durable.
View detail
Purchased for Chain cleaning
[How is it used?
I bought this to make things easier for Chain cleaning.
I also own Racing Stand, but because there was anxiety in one person when I put Racing Stand on CBR because there were few parts to hold and support, I decided on the product here which only needs to be pushed and put on.
Was the one you received as per Image?
The texture is heavy and sturdy as it has a load capacity of up to 200kg.
The rollers can be adjusted to three levels to suit the tire diameter.
For 17in. it was just right in the middle.
There is a slight gurgle in the Roller's rotation, and it would be nice if it rotated more smoothly.
There was no particular problem in use though I thought that the usable tire width was Limit before purchase because it was said that it was up to 200mm.
How was your experience with it?
When turning the Tire, it feels like it takes a little effort with a vehicle weighing about 200kg.
This is a difficult one as it will vary from vehicle to vehicle.
The price is cheap, and it is a product that can be used enough if it is only Chain cleaning and Wheel cleaning.
It's more compact than the Racing Stand (approx. 345mm long, 210mm wide and 40mm high) so it takes up less space to store.
[Points to note]
When I turn the Tire, the bike is a little bit wobbly, so I use Elastic band etc. to make the brake work.
How did it compare to other products?
I don't know because I haven't compared them.
View detail
Easy to use!
I used it on my 177cc motorcycle which weighs 115kg and it did not move the gap when I put the vehicle on it and I was able to handle the rear wheel idling easily.
However, it may take a little effort to spin the rear wheel if the vehicle is at the weight limit.
It is a good idea to occasionally lubricate the roller bearings. A good product should be used for a long time.
View detail
Product with price
Looks etc.. Well done.. The feeling of use comes off as the direction of the front wheel turns, so correction is bothersome. Tire rotates lightly but the deviation becomes Large and it seems to come off. Front stand is useful. View detail
UnitUnit E4010 Wheel Roller
I thought that I want to rotate the foil during car wash.
There was no handling instruction manual.. It was similar to the three-stage Roller adjustment position ??? Toilet paper exchange method. Push in Shaft and remove Roller.
Can I use it during car wash? Seal does not seem to be seen in Bearing and the balls are visible without water resistance so I can not use it for washing it.
The inside of Pipe will get rusted when you rinse water with RACING Sudando you own. The thing of this hand is not the thing used for car washing.
Moisture wiping WAX brushing Checking of Tire is comfortable and I think that this price Cost performance is very high. - - - But - - - Motorcycle standing vertically Racing Stand is easier to work with something.
A word at the end - - - Permitted price.
View detail