Reviews
I'm always ready.
I was able to help when Chain was crushed in Hokkaido and when Tire was nailed in Shimane.
There's nothing sadder than being out of action on the road and having to retire, so the more prepared you are, the better.
View detail
Unit B2510 Front Stem Upstand
I bought a front roll-up on a YAMAHA YZF R1. The tackle is very good to use. The kit includes instructions and fasteners for different motorcycle manufacturers. I recommend everyone to buy, especially those who service their own motorcycle. View detail
Unit Unit B2510 Front Stem Up Stand
ZX25r I bought it because I needed it to replace my Handlebar.
I was able to use the special tip separately without any problems.
Very convenient
View detail
Unit B2510 Front Stem Upstand
I've never had a motorcycle front slide. I wanted to buy for a long time and still bought it. And now I have no regrets. Honestly, at first, I could not understand how he would hold the bike, since there are no restraints. But it turns out he holds the motorcycle under his weight. Now I can easily change the front tires, disassemble the fork. He is the right thing for your motorcycle. Recommend! View detail
The height...
I bought this because I wanted to use it for maintenance of SEROW, but the height is quite high. (Sweat) After all, I could not put SEROW on it by myself. I think it is easy to put it on if I devise something.... If it's a tiger truck, it's light enough to be loaded by one person. It would have been nice if it was a little lower. I am satisfied with the product because it is well built. If it was a little lower, I would have reduced the rating by one. View detail
Car models where the rear stand cannot be used
I was surprised at how durable it was.
I bought it for the maintenance of the rear area because the rear stand cannot be used in my car.
It lifts without a problem.
However, the lever whist is good for hanging.
View detail
For Tire Cleaning
I bought it to clean the front tire when cleaning the motorcycle.
When you put the front tire on the WheelRoller, if you don't put the front tire on the WheelRoller in the middle of the wheel parallel to the front tire, when you turn the front tire, it will come off from the Rollers.
I have to start over from the beginning. It takes experience, but no matter how many times I try, it's hard to get the pit parallel and right in the middle.
Turning the Tire is awkward and requires a lot of force.
If you do not use the Rear stand, the Motorcycle is leaning and is dangerous.
I always use it for cleaning after Touring, I use it for a long time and it is durable.
View detail
Purchased for Chain cleaning
[How is it used?
I bought this to make things easier for Chain cleaning.
I also own Racing Stand, but because there was anxiety in one person when I put Racing Stand on CBR because there were few parts to hold and support, I decided on the product here which only needs to be pushed and put on.
Was the one you received as per Image?
The texture is heavy and sturdy as it has a load capacity of up to 200kg.
The rollers can be adjusted to three levels to suit the tire diameter.
For 17in. it was just right in the middle.
There is a slight gurgle in the Roller's rotation, and it would be nice if it rotated more smoothly.
There was no particular problem in use though I thought that the usable tire width was Limit before purchase because it was said that it was up to 200mm.
How was your experience with it?
When turning the Tire, it feels like it takes a little effort with a vehicle weighing about 200kg.
This is a difficult one as it will vary from vehicle to vehicle.
The price is cheap, and it is a product that can be used enough if it is only Chain cleaning and Wheel cleaning.
It's more compact than the Racing Stand (approx. 345mm long, 210mm wide and 40mm high) so it takes up less space to store.
[Points to note]
When I turn the Tire, the bike is a little bit wobbly, so I use Elastic band etc. to make the brake work.
How did it compare to other products?
I don't know because I haven't compared them.
View detail
Garbage
I am Garbage.
The weld of the bar on the Screw part of the pedestal was tilted.
I managed to fix it with a Rubber Hammer, but I almost knocked over the Motorcycle! 。
The Damper also has a narrow range of effect and there is a shock when lowering the Motorcycle.
BootsSTAND and the welding of a good UNIT product is really inaccurate.
I should have bought the DRC honestly.
I will never buy a product made by unit again.
View detail
Cosmetically, it's alright. The only thing I wish I'd known before I bought it was that ……
I bought this to service my Off car.
When I bought it, I was worried about which one to use with HC2STAND of DRC, but I chose this one because the price was cheap.
It takes quite a bit of hang to lift, or I think that point is the same for all Off-road stands.
The only point is that this product does not have a lock function on the top panel, so when you lift the product, the body is not in quantity.:Pair (for Left and Right) It will move to the It is possible to take measures by fixing it with something, but I think that it is a matter that I want to know before I buy it if possible.
View detail
It's convenient
It is convenient. I have no choice but to say.
The basic purpose is to clean the Chain.
Because it is an Off car and I want to clean it on the way back from Touring and forest road.
However, a regular STAND takes up a lot of space and...
I've got two with On, and the Maintenance Stand (front and back) on that one already takes up a lot of space.
It's very easy to use. Once you adjust the length, you don't even have to hang.
I think anyone can handle it easily.
It's not something I'd pass around, but there's no reason not to buy it.
View detail
Easy to use!
I used it on my 177cc motorcycle which weighs 115kg and it did not move the gap when I put the vehicle on it and I was able to handle the rear wheel idling easily.
However, it may take a little effort to spin the rear wheel if the vehicle is at the weight limit.
It is a good idea to occasionally lubricate the roller bearings. A good product should be used for a long time.
View detail
GSX1300R HAYABUSA is Large strong even if it hangs?
I thought I would use a single pipe to replace the stem bearing on my GSX1300R Hayabusa, but I thought it would be too much work to assemble and disassemble, so I bought this product.
The maximum load capacity is 180kg, so is the GSX1300R HAYABUSA, which weighs almost 270kg, large and strong? I thought that I could go because I only hang the front. (Please do so at your own risk.)
Some people use a Ratchet Tie downBelt to hang it, but when you take it down, it falls all at once, so I recommend a lightweight Lever whist.
View detail
unit stemup stand
"It was shipped by sea, but it was delivered really quickly. I am satisfied with the product for the price. It is good. The painting and welding are well finished. I think it would be better to wrap the bolts or nuts one more time. Will be shipped ----------------------------------------------- ----------- Doeeotguyo maritime shipping, but really fast delivery. Price satisfied contrast products. good. It is such good coating and weld finish. Bolt or nut I think I better give Gamla once more. Package delivery jeongman durable and safe delivery are glad to put a lot of airbags? Powered by Google Translator" View detail
Motocrosser's Engine overhaul
Used in Engine overhaul of KX450.
The shaft diameter is different, so a little wobble is unavoidable.
When I tightened the bolt to fix the shaft, the nut welded to the shaft was removed.
I wish you had booked it instead of tending it.
View detail
Unable to purchase with Bar code search
I tried to buy it using the Bar code search, but the search results showed The sale is now closed. I thought the Bar code had been changed, but when the product arrived, the Bar code was the same and the search results were still The sale is over. It was.
The product will be evaluated after use.
View detail
To prevent falling over
One windy day, the motorcycle with the cover was tipped over by itself, and there were scratches on the exhaust system, mirror and bar end.
I bought it to prevent such a tragedy from happening again.
If you put this on and put it in the low GEAR, it will hardly move, so it can withstand up to 20m strong winds (although I haven't experienced a direct typhoon hit).
Of course, if you extend the rear wheel by one step, the rear wheel will float, so chain maintenance is now easier.
View detail
SmallEngine Displacement VolumeEngine maintenance is a large activity.
SmallEngine Displacement VolumeI have several cars, and I didn't want to waste money buying a special engine hanger for each car model, so I bought this product. It is very convenient. View detail
I'm worried about the wound.
I thought the U-Hook was better than the L-Shaped Bracket and bought it.
The U-shape is more secure and easier to fit.
With the L-shape, you have to make the motorcycle somewhat horizontal to hang it.
I'm concerned about the BALI at the end because Bracket just pulled it out with PRESS.
I didn't want to damage my motorcycle with the Bracket, so I wrapped Vinyl Tape around it.
I want you to wear at least Cushion rubber. I wish you could wear Cushion rubber.
View detail
Exactly for motorcycles that don't have a Center Stand!
ChainMaintenance on a motorcycle without a Center Stand is quite a hassle, but this product makes chain maintenance much easier! I wish I had purchased this sooner. Recommended. View detail