Reviews
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
Addressv125Seat
The Seat I received is torn and I want to return it.
I had to delete the order screen when I received the item and
And that it's an unused number to call.
I could have emailed her, but she wanted a picture of me.
They said they shipped a torn Seat and if you want to return it, you have to pay in advance.
When you send a damaged item, you pay cash on delivery, right?
In the first place, it was not an expensive item, so I thought I would pay in advance.
It makes no sense because it would be an expensive product. 。
Why should our side have to go that far?
The system is difficult to return.
I still use this Shop only for buying OEM Parts.
View detail
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX, HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
most parts dont fit
The undercowl fenders do not fit without any custom fabrication, i had to use a dremel to make some parts fit. And one fender peice came with broken plastic. Would NOT recommend. View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
Prices are low, but
Purchased for the design, visibility and price.
No instruction manual is included, but only a bolt and spring washer are needed for installation.
I installed it on a GSX-S125 '23, but first of all, the bolt hole on the Mirror is too small for the Washer to fit in.
Bolt is too long and Mirror is fixed when installed with Bolt alone.
I had to cut off the screw threads.
Please check the length of the lower hole of the car body to be installed and purchase the product.
View detail
Fits: Others
Long?
It's much longer than the original pad pin, is this correct? If anyone knows, please let me know. View detail
The supplied hexagonal was licked easily and could not be used because the fixation was too loose even after tightening it.
I wanted to return the product, but the Hexagon Bolt has become so licked that I can no longer remove it.
If I purchase another Handlebar, I will discard this product. I don't need to return it.
It should be possible to fix the Handlebar part by tightening it with a hex, but the quality is so low that the Handlebar moves no matter how much it is tightened, and I will never buy this Manufacturer's again.
View detail
Don't buy it.
I understand that this is Chinese, but this is definitely not the way to go! I don't even know if it works properly. I don't even know if it's working properly. I don't even know if it's broken or not, and I can't return it because it's already installed, and it sucks. View detail
Power consumption is only low.
It is clearly darker than Halogen.
We contacted Manufacturer.
This product is darker than Halogen bulbs, but not brighter.
The Company does not guarantee the accuracy or completeness of the information provided.
The response was.
It cannot be used for Headlight.
View detail
There wasn't enough light.
I replaced the HI with the 01 BANDIT 1200 HI, but the Halogen is brighter and disappointing… It's a Projector Headlight, so it doesn't seem to be an optical axis adjustment issue. View detail
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
A piece of the upper panels is missing
Hello, I received the product on time, a piece of the upper panels is missing.So it is useless.The fairings are beautiful but a piece is missing and I cannot mount them on my scooter -------------- -------------------------------------------- Good morning. I received the product on time is missing a piece of the Upper Panels. So it serves nothing. The hulls are beautiful but a piece is missing and I can't mount them on my scooter Powered by Google Translator View detail
Fits: その他
Position side could not be lit.
The Blinker can light the Pilot lamp, but the Position lamp cannot light the Pilot lamp.:Pair (for Left and Right) Both are lit bonderly.
Plus contact of the mouth Gold, since we could see continuity between the two, did it not match the vehicle?
View detail
Fits: その他 12V car
sr400 1.5w To led Sequential Blinker
12v1.5w on body sr400 To led Sequential Blinker
High flasher did not improve and became very hot within a minute, so I stopped using it.
View detail
Fits: Others
Ensure inspection before shipment
The product is fine.Quantity:I ordered 1 set of 2pcs. I wanted 4 bottles, so I ordered 2. I wanted 4 bottles, so I ordered 2.
I recently asked a question about Brembo radial caliper and the OEM Product is Brembo radial caliper, so if the installation Pitch is the same, it can be installed, but it is not compatible with your vehicle. Brembo radial caliper is a Universal Product per installation pitch? Do the people working here understand the structure of Motorcycle?
View detail
Fits: BUELL CYCLONE M2 [Cyclone]., BUELL S1Lightning, BUELL S3T Thunderbolt, BUELL THUNDERBOLT S3 [Thunderbolt]., BUELL X1 Carbon Fiber Extreme, BUELL LIGHTNING X1 [LIGHTNING]., BUELL X1 Racing Stripe, HONDA CB1300SF SC40, KAWASAKI Ninja ZX-7RR ZX750N 96-98, HONDA CB1300SF SC40 98, KAWASAKI Ninja ZX-7RR ZX750N 96-98, HONDA CB1300SF SC40 98
I doubt the quality.
The OEM pad was worn out, so I purchased this product after asking for confirmation of conformity, but even though it was installed properly, the brake rotor interfered with the brake pads because the length of the surface where the plate that holds the brake pads hits the brake pads was different.
I returned it to Manufacturer for inspection and they said no problem!
However, when I return to OEM, the problem area is not interfered with and there is no problem. (The shape is obviously different compared to the OEM parts.)
I was dissatisfied and the product was StressLarge with no progress even though I sent an email asking for pictures and descriptions of the installation.
View detail
Main mirror was not that flexible to adjust . Little movement on the mirror not serving its function .must improve on the qualit
Main mirror was not that flexible to adjust . Little movement on the mirror not serving its function .must improve on the quality and functionality. View detail
Wiring is reversed
I bought this product to customize my SUPER CUB, but the wiring of the Blinker was reversed.
I noticed it when I wired it and checked it. It's not much work to cut and solder the next wire again, but it was disappointing.
There is no problem with the use and appearance. The operation is also working without a problem.
View detail
Fits: KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
It broke right away.
When I took it off to replace the valve, the bracket of the screw of One Side was removed.
I didn't know it would break after just one removal…
I'm sorry
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA MAJESTY250 SG03J for Rear, YAMAHA YZF1000 THUNDER ACE 4SV for Rear, ITALJET Jupiter 125 02 for Rear, ITALJET Jupiter 150 02-03 for Rear, YAMAHA SEROW 250 S DG11J for Front, YAMAHA SEROW 250 S DG17J for Front, YAMAHA SEROW 250 , YAMAHA XG250 TRICKER DG10J for Front, YAMAHA XT250X DG17J for Front
Efficacy.
I thought it was because I was not accustomed to it, but after 1500km, I changed to a different Pad because the Touch was not good.
I use it on an off-road motorcycle, and this product was not for me because I value Touch at low speeds.
I was able to return to the same brake performance after installing a new pad from the supply store.
View detail
Difficult to use
I've never used this kind of brush before, but it's hard to move and I don't feel like it's getting cleaner. I ended up using Nylon brush. View detail