Reviews
Easy dress-up
First, one of the two Bar Ends was defective in size and did not fit into the inner diameter of the Handlebar as it was. The other one was fine, so it must be defective.
It was a Level error that I could manage by sanding it myself, but it was a hassle and I would have been happy to return and exchange it. Other than that, I am satisfied with the quality and design.
I installed it on a SV650X Handlebar, but did not use anything that came with it except the Bar End, and reused the Screw, Rubber, and Weight that I removed from the original Bar End.
View detail
If it could be positioned more precisely, there would be nothing to say.
The Arm that holds the Mirror rotates parallel to the Handlebar and positions it to the Large side, but it cannot be fixed at any position. If the Arm is fixed by extending the Arm outward from the Handlebar End, the width of the car may become too wide, which may be illegal. If the Arm is fixed by extending the Arm outward from the Handlebar End, the width of the car may become too wide, and it may be illegal.:), so just moving it by 1Click is quite inward, and your arm is reflected in Mirror quite a bit. Naturally, you cannot see directly behind you. This is a little disappointing.
Triumph's Bar end mirror looks like it would be easy to see.
View detail
Fits: HONDA BENLY50, HONDA CB250R, HONDA CT110 HUNTER CUB, HONDA DAX, HONDA glom, HONDA XELVIS, HONDA Night Hawk, HONDA JADE, HONDA HORNET, HONDA GB250 CLUBMAN, HONDA DREAM, HONDA CL250, HONDA VT400S, HONDA R100 ROADSTER, HONDA GB400, HONDA CB400, HONDA CB400SF, HONDA BROS, YAMAHA RENAISSA, YAMAHA SR250
It's very cost effective.
It is OEMMirror-like enough to be satisfactory for the price.
Plating is clean, mirrors are not distorted, and there is no blurring while driving, so rearward vision is good.
The difference between OEM and Large is that the ROD is shorter (lower) and the black parts that look like shock absorbers are just materials.:It means that it is a Plastic Cover. Of course, there is no way to add a shock absorber at this price, so it makes sense.
Overall, I think this is a good product with high cost performance.
View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
Protective Cover
I am worried that it will melt in the Exhaust System, so I let it cool for a while before using it. Does anyone know if it will not melt or not? View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
Fits: YAMAHA MAXAM [Magzam] (SG17J/SG21J)
MAXAMFront wheel Disc Rotor
When I got the MAXAMFront wheel and tried to install it on MAJESTYC, I realized that the MAJESTY and MAXAM discs were not compatible, so I had to order one in a hurry.
I chose it for availability and price because I don't think there is any need to be concerned about OEM for a street-use scooter.
The entire DISC is still machined, so discoloration around the hub is a future concern.
View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail
C17Z9990010ZZ
I'm used to using the emergency light in the car (blinking all the turns) to attract attention, to say "thank you" and so on. I miss this feature on my Honda Little Cub. I purchased this button to eliminate this "injustice". I haven't installed the button yet, but everything is fine in terms of material and workmanship!!! View detail
Convenient to install Disc Lock on the vehicle without burden to the body.
I would like to carry a Disc Lock with Alarm to protect against theft while on the road, but I don't want to carry it in my backpack or HolsterBack because the Disc Lock is so heavy.
Also, since I ride a naked motorcycle and did not want to use a Seat bag or Tank Bag just for this purpose, I chose this Holder which allows me to secure the Disc Lock to the vehicle body.
This Holder is designed to be attached to the Handlebar, but I didn't want to make too much noise by attaching this and that around the Handlebar, so I attached it to the Tandem FootpegBracket.
I am satisfied with the ease of use.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
Inexpensive but effective parts
The fastening Bolt of BMWOEMBrake Caliper was rusting, so I replaced it with Titaniumium Bolt from Rise Corporation during Overhaul.
A certain Oak Auction has a Bolt made of SUS304 Stainless Steel for Caliper fastening, but considering the fracture strength of the material, I think it is very dangerous and has a high possibility of breakage.
This Titaniumium bolt should have no problem in terms of strength, and the screw threads are beautifully machined.
View detail
Fits: YAMAHA TZR250, YAMAHA XJR400, YAMAHA TDM900, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA MT-01, YAMAHA FZR600, YAMAHA FZR600, YAMAHA YZF600 THUNDER CAT [Thundercat]., YAMAHA YZF-R6, YAMAHA FZS1000 FAZER [Feather]., YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA ROADSTAR1600 [Roadster]., YAMAHA ROADSTAR1700 [Roadster]., YAMAHA TZr125 R (4DL) for Front, YAMAHA TZr250 R (3XV) for Front, YAMAHA TZr250 RS (3XV) for Front, YAMAHA FZr400 RR (3TJ) for Front, YAMAHA FZr600 SFAZER 98 for Front
Brake Pads
This is the first time I have purchased and used this Manufacturer's Brake Pads.
I've only replaced them with less than 200km of driving, but the effect is a little softer than my previous Brake Pads.
I think it's like
I am hoping that after a few more runs, it will adjust and become the ideal effect for me.
View detail
For retrofitting electrical systems
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
It was a little bit difficult to wire the unit because it was installed from scratch in a vehicle with no safety components. 6V MONKEY/GORILLA Main Harness is connected to the main harness, which switches the supply from the power source on and off.
View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Blinker replacement
Replacement was easy, but the Valve needed to be replaced because it was a high flasher. View detail
Addressv125Seat
The Seat I received is torn and I want to return it.
I had to delete the order screen when I received the item and
And that it's an unused number to call.
I could have emailed her, but she wanted a picture of me.
They said they shipped a torn Seat and if you want to return it, you have to pay in advance.
When you send a damaged item, you pay cash on delivery, right?
In the first place, it was not an expensive item, so I thought I would pay in advance.
It makes no sense because it would be an expensive product. 。
Why should our side have to go that far?
The system is difficult to return.
I still use this Shop only for buying OEM Parts.
View detail
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX, HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
most parts dont fit
The undercowl fenders do not fit without any custom fabrication, i had to use a dremel to make some parts fit. And one fender peice came with broken plastic. Would NOT recommend. View detail
Fits: HONDA FUSION [Fusion](MF02), HONDA FUSION [Fusion](MF02)
looks great
Looks great and definitely made my instrument cluster look alot better. Just unfortunate theres no official way to put in the Honda Helix logos into that aftermarket cover. But otherwise looks good View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
Very Nice!
Awesome exhaust great prices and super fast shipping. The workmanship is incredible can't wait to install it on my Honda reflex scooter it is still winter where I live but I will install it asap! Thank you so much! Gerry View detail
Fits: SUZUKI VANVAN200, SUZUKI GSX-S125, SUZUKI GSX-R1000R, HONDA APE 50, HONDA DIO110, HONDA BENLY50, HONDA BENLY50110 PRO, HONDA BENLY50110, HONDA BENLY50 PRO, HONDA APE 100, SUZUKI GSX-R1000, SUZUKI BURGMAN200, YAMAHA MT-25, YAMAHA MT-07, YAMAHA MT-03, YAMAHA MAJESTYS, YAMAHA CYGNUS 125, YAMAHA CYGNUS X, HONDA APE TypeD
What a quality!
It is subtle in terms of Size.
I think the normal use is to use Side Stand with Handlebar Lock.
Sexy as in the picture, your legs are visible. I wanted it to be just a little bit longer.
Also, the bottom belt broke off after 3 days of use. What kind of quality is this?
The motive for purchasing the product was not only the price, but also the fact that it was written as heat-resistant, so I focused on the fact that I could apply it immediately after returning home, but Belt may have melted due to the heat from the Exhaust System.
As for the Cover, it is Black and has the word Security on it, so it is concealed for the purpose of minimum security. So, Belt is very disappointing because it is Clear.
I honestly want to return it.
View detail