Reviews
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Cute rounded Tail lamp.
[How is it used?
I had made my own Fender Eliminator and used a DRC Tail lamp to refreshen the Rear area of my KSR-II, but I felt that it did not fit the round Image KSR and was looking for an alternative product. I was looking for an alternative when I found this product on Webike.
Was the one you received as per Image?
I think SPTakegawa had a product of the same design when LEDTail lamps started to appear in the world....
I remember that the LED bulbs were expensive and they were prone to break easily, so I had to replace them because they looked shabby and the glowing parts were gradually diminishing.
I remembered this after purchasing the product, but I installed it with a positive attitude, thinking that the reliability must have improved over the months that had passed since then.
The product is more than Image.
Was the installation difficult?
In my case, I made my own Material:Since the work was to install the Fender Eliminator on an aluminum Fender Eliminator bracket, drilling and wiring were performed on the Fender Eliminator side of the self-made Fender Eliminator (only the Tail lamp was used, not the Plate attached on the back side). (Only the Tail lamp was used and the Plate attached to the back side was not used).
This product is Universal Product. So I think Large, Small, or this kind of processing will be necessary.
After installing it on the Fender Eliminator, all you have to do is connect the wiring of this product to the wiring for the tail lamp on the body of the vehicle, but this product does not have the wiring that is often found in this type of product. "Bullet Type Terminal Spec
Modern motorcycles have connector terminals, so it is easy to find a connector that fits the harness side of the vehicle at KITACOConveniencePartsetc. and modify it to make a simple connection.
Fortunately or unfortunately, most of the terminals that connect to each light in KSR-II are Bullet Type Terminals, so it was possible to connect them with a small modification.
How was your experience with it?
The LED bulbs have not broken out like previous similar products mentioned above, so the functional part of the product has not been a problem so far (observation required).
My personal impression is that the rounded design of KSR and the slightly old-fashioned design of this product match each other and seem to fit together strangely.
[Included Parts:were they on?
It was a Simple Package with only a Tail lampBody, UniversalPlate, and a simple Instruction Manual.
[Was there anything that disappointed you?
Not at all.
I hope it is durable.
Other items that would be helpful
Point and hang of installation
This product is Tail lamp and UniversalPlate is Quantity:The play is a set product, but it should be considered only as a bonus, and you need to image how it can be installed in a good (or safe) manner in the vehicle you want to install it in before you start the processing. I'm thinking, "Huh? Maybe I should have mounted it a little higher (or lower)?" You may end up redoing the work because you are not convinced like I was (I'm not half disappointed...).
[Availability and clarity of the Instruction Manual
A simplified but illustrated Instruction Manual is included.
[Notes]
Nothing in particular, just be careful not to misplace Wiring.
[ITEMS TO BUY TOGETHER
As I mentioned above, it is sold by KITACO and others. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it is better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
Please keep up the good work in maintaining prices as much as possible and keep selling for a long time to come.
View detail
Fits: SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
It's getting brighter
The OEM had deteriorated and we replaced it with this less expensive one.
It reflects the light of the Valve well, so it is very easy to see and I am satisfied.
However, I changed to LED bulbs at the same time, and the light seemed to be slightly scattered, so I gave it 4 stars for visibility.
I don't think Halogen or OEM Valve would mind.
View detail
Good visibility
I feel that it is bright when lit and has good visibility. View detail
Fits: BUELL M2CYCLONE, HONDA CB1000SF, HONDA CB1100RS, HONDA CB1300SF, HONDA CBR1000F, HONDA CBR600F, HONDA VFR750R, HONDA X4, HONDA X4, KAWASAKI ZRX1100-2, KAWASAKI ZRX1200, KAWASAKI ZXR750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, Others , SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1100
I'd pay a little more if I had to.
I bought this to replace the Front suspension with an XJR1300.
We have to buy a new 43mm front fork, so we have to buy a new Headlight Bracket and everything else.
I had to get Parts to get started, so I bought them in a hurry and was amazed at the quality.
To be honest, I had never heard of a Brand called Rise Corporation, and I didn't have high expectations.
The quality of the cutting and the texture of the Anodized are perfect, although from the price and the Package received, it is probably imported from a factory in China or Taiwan.
I purchased Black and there was no unevenness in color.
Some aluminum cut-out parts of this kind seem to have poor quality and strength, but since it is a headlight bracket, there is no need to worry that much.
If it is a Harley or BigSingle engine Motorcycle, it might be different.
I will use it, at least in the case of my Motorcycle, as it is not a problem.
If it should break, I might buy it again at this price.
Incidentally, since the hole for Blinker is 10mm in diameter, some countermeasure is necessary when installing the recent Small Type Blinker.
View detail
Fits: SUZUKI GSR600, SUZUKI GSR400, YAMAHA BT1100, SUZUKI Bandit 1250, SUZUKI Bandit 1200S, SUZUKI Bandit 1200, SUZUKI RF900, SUZUKI GS1200SS, HONDA VFR750R, HONDA CB1100RS, BUELL M2 Cyclone, その他 , SUZUKI GSX-R1100, SUZUKI Inazuma 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FZR400RR, YAMAHA V-MAX1200, TRIUMPH thunderbird (North-American indigenous mythical spirit bird), TRIUMPH Trophy 900
Very Nice
Fits CB1300 pretty well, machining quality is top notch This relplaces the bulky headlight bracket and signal light holder. View detail
Fits: HONDA FORZA [Forza] (MF06), HONDA FORZA [Forza] (MF06)
Turn signals forsa mf06
Excellent fit and quality. This prduct arrived quicklly and packaged very good. I would highly reccomend for a custom look. View detail
It's bright
This is the second time I have purchased the License Plate Light and the tail light short due to my own wiring error. I took measures against vibration, mounted them on an aluminum plate, and fixed them to the License Plate Bolt. View detail
light
I bought it because I wanted to lighten the weight around the Handlebar.
The OEM's Headlight is just gone, as they wanted it to be.
The handlebar area has become very light, and handling has become lighter.
Mirror was also changed to Trial mirror at the same time.
Significant weight reduction.
The drawback is that the lights are dark, almost invisible, etc., so be careful when driving at night.
View detail
Fits: KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Before changing the Light, you need to make a change.
The OEMLight felt dark and I thought it would be a good idea to try and change the angle of the light before changing the Light itself, so I replaced it.
There is a considerable change.
good point
●Tunnel, easy to see even when driving at night.
Because of the angle of the light, even OEM type Halogen bulbs are bright enough.
No need to worry about vehicle inspection.
Less expensive than changing the light.
A bad point
The replacement itself is not difficult, but it is troublesome because it involves disassembling the light case.
I think it is one hand to change to HID or LED, but there is also the problem of car inspection. I think it is safer and less expensive to use the brightness of the original Halogen bulb.
View detail
LED Tail Lamp
Installed on CB223.
It's nice and clean around the Tail.
View detail
Fits: HARLEY-DAVIDSON sportster, HARLEY-DAVIDSON XL1200C 1200 Custom, HARLEY-DAVIDSON XL1200T Super Low 1200T, HARLEY-DAVIDSON XL1200V Seventy-Two, HARLEY-DAVIDSON XL1200X Forty-Eight, HARLEY-DAVIDSON XL883L Super Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C 1200 Custom, HARLEY-DAVIDSON XL1200T Super Low 1200T, HARLEY-DAVIDSON XL1200V Seventy-Two, HARLEY-DAVIDSON XL1200X Forty-Eight, HARLEY-DAVIDSON XL883L Super Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Mini turn signal installation review
I didn't like the size of the genuine turn signal, so I bought a mini turn signal. One thing to be aware of when installing this product is that the flashing speed becomes faster because an additional relay is not installed. It is not a major concern while driving, but it is left as it is, but if you are concerned about this part, you need to install an additional relay. I am very satisfied with the design --------------------------------------------- - Genuine turn signal do not like the large size bought a mini turn signal. The point to note when installing the product causes this phenomenon is not flashing speed necessary to install additional relays. If this part concern, not used much about traveling, but the two parts of the same are to be provided with an additional relay. Design is very satisfied seureopneyo Powered by Google Translator View detail
Exactly attached to MY2020 BetaRR2T
It was Exactly the Rear Fender on my 2020 BetaRR2T!
Crimped and damaged OEM Tail lamp.
It's a Minor foreign car, so I'll have to ask a Motorcycle shop to order an OEM one for me.
I was struggling with whether to modify and install the Universal Product, but this product Exactly came with it.
The width, height, and even the shape of the OEM Fender screw pitch and tail lamp mounting area are exactly the same.
I haven't checked the OEM price, but I think it's probably cheaper here.
I'm happy with Large because it's cheap and doesn't require any complicated processing work.
View detail
Fits: その他
Installation was a breeze
It was a simple job to remove and replace the NORMAL bulb.
However, it was not possible to use Normal blinker relay, so I had to replace it with a Relay that is compatible with LED bulbs.
The good thing is that MONKEY doesn't generate a lot of power, so watching BoltGauge, I think it's battery friendly as well, since the power hardly drops.
The brightness is also slightly different.
View detail
Visibility is high.
This is installed in CRM80. 1? thick aluminum plate is used as the base, and the rubber for Bar End is inserted for the vibration measure. Wiring is extended suitably, and the terminal of Coupler is pulled out, wound, and it is not to be pushed Short, but I want to make the maintainability a little more soon. Although LED is put in the tail lamp of CRM80 itself, there is also the cloudiness of the age deterioration of the lens and the brightness of the important thing is enough. (especially License Plate Light) I chose this product because it is not very forgiving, especially when idling.
I'm looking forward to seeing how durable it is.
View detail
Fits: その他
Used for groms
I have been using the same Blinker without the position function for some time It is compact, but very bright and cool in shape, so I liked it I bought the one with the Position function
However, if you use the Position function, you can turn on the blinker even though it is bright when you are in position and a little bit dark and unusable, so I changed the connection and the same normal Blinker as before I was able to use it as a
I don't know if it's a glitch or something like this, but if I'm going to buy one, I'm going to get the one without the Position feature I recommend it
View detail
White color, the light might be a little weak
The Aerox position lamp was replaced with a white LED instead of a warm bulb
(Headlight is white LED, but the position lamp is a warm color bulb (The)
It turned out to look as it was supposed to, but maybe a little darker
I felt the price was a little high and the texture (with some BALI left in it), and each of them was a - 1
However, I was able to change it to look like Image, so Others are happy with it
View detail
I'm satisfied!
I changed to slim LED Tail Lamp along with Rear Fender Custom
Large satisfied with the cost performance
Rear Refreshing
View detail
Fits: その他
License Plate Light to LED
Installed on a '95 Kawasaki EX-4
Because the License Plate Light and the Stop lamp are separate bodies, the power consumption is also Large I thought it would be nice, so I'm replacing it
The License Plate Light itself is common to the ZZr400, so it's a good thing that the (Maybe there are other bodies in common.) You can replace it with this unusual G18 bulb
If you remove the cover of the vehicle with a Phillips Screwdriver, the Access It can be done So, remove the white heat bulb that is attached and install the LED's In order to check the height of the Quantity:It is a picture of 1pc. eyes, but it can be installed without any problem The large size of the mouth gold does not seem to be so different
If it doesn't glow, turn it backwards to check the polarity If you can plug it in, it will probably glow (If it doesn't glow, it might be defective.)
All that's left is to assemble it back together and that's it
The degree of brightness seems to be fine
However, since it is a cheap product, Quantity:I stock the other one in reserve as it arrives in 1 Set of 2pcs
View detail
Fits: KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Reflector Headlight for Zephyr 750 (Rise Corp.)
Very nice product, good quality. Lighter than the original, clear glass lense was delivered without errors. Fits perfectly on the bike. Good price-quality ration, I recommend it also to other bikers. View detail