Reviews
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Blinker replacement
Replacement was easy, but the Valve needed to be replaced because it was a high flasher. View detail
Simple&Compact
[How is it used?
I bought a used WR250R a few years ago with a Fender Eliminator Kit from Other Brand Product.
The Fender Eliminator itself was fine, but in my opinion, it had a tail lamp that was not suitable for the vehicle, so I purchased this product to replace it.
Did you receive the item as per the Image?
The product received is more Compact and thinner than I expected, and depending on the position setting, it looks I don't think the tail lamp is installed!" The product was so large that I felt it was more than Image could provide.
Was it difficult to install?
The functional aspect of the Lamp is completed when the originally installed Bullet Type Terminal for connection is removed and connected to each.
My WR250R has Other Brand Product's Tail lamp as mentioned above, and it was originally Bullet Type Terminal connection, but I replaced the Bullet Terminal on the product side because the terminal size was a little too large. 1 pc is Grounding Wire (Black) I can't remember which is which... sorry.
The Fender Eliminator can be installed without any modification because the holes were aligned well with the original holes for installing the Tail lamp.
If you buy the OEM type connector for each manufacturer sold by KITACO and connect Wiring, Wiring will be refreshed and you can easily return to NORMAL when you want to. If you want to return to NORMAL, you can easily do so.
How did you like it?
The Tail lamps are fixed in a safe position because they can be involved in unexpected accidents such as rear-end collisions when driving on public roads if they are not clearly visible. (I have a friend who says that I am over-refreshing...) I personally have nothing to say.
Was "Included Parts:" attached?
It is a very Simple product with all the product images shown in Webike's product section.
Were there any disappointments?
Not at all.
Because of the low price, I was worried that the LED bulbs would burn out, but they have been functioning without problems for several years since they were installed.
Other items that would be helpful
Point and hang of installation
If you want to process Wiring as beautifully as OEM, use the OEM Type Connector by Manufacturer as described above! (Since this is a personal judgment, those who are fine with Bullet Terminal can leave it as it is, but since it is an insulated tape, please make sure to perform waterproof treatment.) 。
[Availability and clarity of the Instruction Manual
electrical system (?) I think this is a very straightforward product for the
[Notes]
Nothing in particular, just be careful not to misplace Wiring?
[ITEMS TO BUY TOGETHER
As I mentioned above, this is also available from KITACO and other companies. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it may be better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
The price is low and the product is Compact, so it is a highly universal product.
View detail
Fits: HARLEY-DAVIDSON sportster, HARLEY-DAVIDSON softail, HARLEY-DAVIDSON Dyna., HARLEY-DAVIDSON FLSTF Fatboy, HARLEY-DAVIDSON FLSTFB Fat Boy Low, HARLEY-DAVIDSON FXCWC Rocker C, HARLEY-DAVIDSON FXD Super Glide, HARLEY-DAVIDSON FXDB Street Bob, HARLEY-DAVIDSON FXDC Super Glide Custom, HARLEY-DAVIDSON FXDF Fat Bob, HARLEY-DAVIDSON FXDL Low Rider, HARLEY-DAVIDSON FXDWG Wide Glide, HARLEY-DAVIDSON FXST Softail Standard, HARLEY-DAVIDSON FXSTC Softail Custom, HARLEY-DAVIDSON XL1200C 1200 Custom, HARLEY-DAVIDSON XL1200CA 1200CA Limited, HARLEY-DAVIDSON XL1200CB 1200CB Limited, HARLEY-DAVIDSON XL1200CX Roadster, HARLEY-DAVIDSON XL1200T Super Low 1200T, HARLEY-DAVIDSON XL1200V Seventy-Two
Compact and GOOD
With OEM, it's not so bad hanging from Handlebar, but I'm getting tired of it, so I changed Blinker.
Front is this product and Rear is Active's NumberBlinker.
The work is just to cut off the Wiring and connect it.
First, Rear was assembled and test lighted. Normal. Ceramic resistor was installed.
Front is co-tightened to Mirror, and a resistor is engaged to test the light. Hazard lights up no matter how many times I try.
The resistor was removed and reassembled.
I don't know, but okay.
The brightness is sufficient, so I would like to think it will pass inspection.
Of course, it comes with EMark, so it should work.
View detail
Fits: その他
I still prefer BlinkerLED.
Is it good that the current consumption has been reduced or is it slightly darker that the LEDs were replaced? View detail
Sufficient light even in Compact
[How is it used?
I purchased this for a Rear blinker.
Was the one you received as per Image?
I received the same as the picture on the Product Page.
Was the installation difficult?
Installation was easy with M8 Bolt + Nut as there is a φ8mm hole.
I prepared a separate Bracket for Blinker with Number co-tightening.
I think it will require some ingenuity depending on the type of car.
Wiring was separately prepared and installed with a 2-poleCoupler.
Wiring work such as crimping is required.
How was your experience with it?
It is a Blinker, so the brightness is Main, but it is very bright and visibility is not a problem.
Case is also Material:Aluminum for durability
[Included Parts:were they on?
No Included Parts:Bolt and terminals for installation must be prepared separately.
Also, since it is LED Light, I think Relay for LED will be necessary.
[Was there anything that disappointed you?
The Lens and Aluminum Case are separate parts.
Since the fixing is only one Small Screw, I am worried about the Screw falling due to vibration.
I removed it once, applied Screw lock agent and reassembled it.
View detail
I wanted a Red Lens but they didn't have one.
I installed it as a supplement to the Stop/Tail lamp. 。
It's hard to tell from the picture, but I think the visibility is high when the stop lamp is on.
View detail
Fits: その他
Visibility is good.
The smoked lens makes it easy to see whether the blinker is on or off by the reflection of sunlight, which improves safety. When the indicator is displayed, the LED light is very bright and increases the visibility. The shape is also sharp and stylish. View detail
Fits: その他
HIDFull kit
[How is it used?
Halogen bulb of TDM850 is out, so I decided to replace it with HID.
Was the one you received as per Image?
I cancelled my order once and reordered, changed from H3 to H1.
Was the installation difficult?
The TDM850 was a Lamp replacement Large odd. The place is small and hard to get to.
How was your experience with it?
Large Variety Satisfaction
[Included Parts:were they on?
It was attached, but there was no Fixing Screw, so I fixed it with Double-sided Tape.
[Was there anything that disappointed you?
Installation/WiringManual is not good.
Other items that would be helpful
The Instruction Manual is difficult to understand.
View detail
Not too bright to be noticeable in the daytime
[How is it used?
I use it for the position lamp of my commuter vehicle SUPER CUB110.
Very easy to use, just replace from OEM Valve.
Was the one you received as per Image?
The shape is as Image, but the length is longer than I expected and interferes with Light case.
I'm using it as is for now.
Was the installation difficult?
There is nothing particularly difficult about it.
If you plug it in and it doesn't light up, you can reverse the installation and the Large outline will light up.
How was your experience with it?
My impression is that it's not as bright as I thought it would be.
It's a Position lamp so it's not really a problem, but I didn't get as much performance as the price.
View detail
Cost performance is good. However, I would like a little more brightness.
The tail lamp on my commuter Scooter is out.
I chose T10Wedge Bulb of White color LED because I thought it is not White if I put a normal T10 Filament bulb.
Basically, the Tail lamp is often a double bulb that also serves as a stop lamp, but the Scooter we own has an always-on Tail lamp in the Center and its Quantity:Pair (for Left and Right) So, it was a Single Bulb and T10 WedgeValve was used.
It's not a Non-Polar Type, so if it doesn't light up when you put it on, just pull it out and flip it 180 degrees and it will light up as Large. It is not a Non-Polar Type.
As for the brightness, to be honest, it's a bit subtle.
Because of the Valve's role as a stop lamp, it was a part that needed to shine brighter than the T10Filament bulb placed in the Center, but it was almost the same brightness.
The LED's crisp lighting speed is attractive, but the brightness is not quite there yet.
Well, Cost performance and availability was very good for this product, so I gave it 4 stars.
View detail
I'm happy with the brightness.
When I opened the We-Big box, I found the product in a Vinyl bag.
It must have messed up in the bag, part of the fan was missing, it's functional, but I hope it's packaged properly.
Motorcycle not Car (Move) I installed it in
Because the angle of the shining part is different when the product is attached to the Light, I made the mounting hole of the part into a long hole and corrected the angle and attached it to the Headlight.
When installed, the lows are perfectly bright, they are well lit up in front and nice without any weird diffusion.
The High beam is a bit difficult to use because it illuminates quite a bit higher up, but at this price, you may not be able to go back to a regular Halogen.
I'm thinking of installing it on my motorcycle now, though I'll have to modify it quite a bit since it's an H4R...
View detail
This large, bright and affordable
Mounted on a Kawasaki ZX10R (2017)
(The OEM Blinker and the Fender Eliminator KIT were installed earlier (Replacement
There are some cars with Fender Eliminator Kit, but I'm going to use the OEM Blinker When installed, Blinker's Quantity:Pair (for Left and Right) Wider than NORMAL and more likely to suffer serious damage in the event of a fall It will be
Even in my ZX10R, it is about 10cm wider than NORMAL and has become 46cm wide It was
The overall length of this product is only 42mm (the OEM is about 130mm), and the Mount section is an additional 1.5mm You will need a mount plate, but even if you include the thickness of the mount plate, the width of the blinker is 30cm It is now below
This is a large size, but the rubber mount is anti-vibration and a little bit of force can be applied The structure is resistant to damage as it bends and absorbs the load
The wire is penetrating the hollow bolt that serves as the attachment shaft Waterproof is solid and does not require additional measures of Cokingetc
The length of the wire is not revealed as product information, but it was 35cm
When I lit it up, it was as bright as a Normal blinker (bulb) It is called Safety Standard Corresponding Product
This is less than half the price of a similar product from Kiroma or DeKenna, so it's a super bargain
I'll also mention the caveats and drawbacks
There was a Small scratch from the beginning It could be said to be a roughness peculiar to foreign products
Bullet Type Terminals are difficult to install due to thin wires
When using Bullet Type Terminal, the general-purpose φ4mm is not suitable for installation It's hard to get the Nut through
Anyway, it is better to cover the wire with Protective Tube because it is thin
ICRelay is required, of course
Durability will be tested in the future
Unlike the light bulb type, the body has to be replaced, which is cumbersome, and when the service life is over, the same I'm anxious to see if I can get one
View detail
It's not that bright
It is used for MADMAX LITTLE CUB Rear blinker
The vehicle installed is a 1992 SUPER CUB C70DX
In this combination, the brightness is darker than that of an ordinary sphere, and lateral light distribution is Main's product
The construction of the product itself is very good
View detail
I can cut to my favorite length and it is so bright
Purchase to attach StopLight to Kijima's Rear box attached to GIVI's Monokey base.
The LED can be TapeCut in units of 1 Unit, so it was possible to adjust it to just the right length. Because ... Because the Instruction Manual is not on, it is difficult to understand by examining with Rides Corporation's HP, but the position of Cut was listed. Even though I cut this place I felt uneasy about Large durability but it went well.
Brightness can be recognized even during the day so it is bright enough at night.
Since Tape 's Tube is transparent, it has a rectangular White LEDTip, so I tried painting with Red Magic but it did not affect the brightness.
View detail
Small is cheap and cool
It was cheap and Design was also good, I used it twice, but neither is about 1 year (4000 kilometers) Tail lamp, Stop lamp will not shine. Those who can divide into consumable items please. View detail
Fits: その他
I'm fine with the price
I am sorry that the box of goods is solid but the contents are messed up without being in the bag.
I thought that it was unsatisfactory because the price was cheap, but for the time being, Motorcycle's Cowl was removed and Wiring was connected to start the engine ,,, BlueWhite light! Because light got on properly.
After that, decide the position of Ballast and Wiring, complete Cowl and complete.
Now I just installed, so I expect more brightness and durability.
Even without looking at the Instruction Manual, it was easy to install because there is no mistake in installation.
View detail
Satisfied with the appearance
MSX (Guromu) There are also exclusive items, but I do not like the appearance, I purchased this Universal Product. I carefully examined Size, but I was worried whether it fits nicely. The Cut condition of SIDE is perfect as much as I think whether it is a special item.
However, a little processing is necessary for installation. Installation BoltQuantity : Because the width of 2pc is different, I brought Plate stopping Bolt to the width of MSX to Bolt of Lamp. It was not easy because it was not special processing such as welding.
Rear surroundings are super clear and Large satisfied.
License Plate is wearing Lender Bracket on Fender installation Bolt.
View detail
Fits: その他
After durability
Basically it does not ride at night, but Tunnel part etc. I was concerned about the darkness and replaced it.
I purchased this if I aim for cheap cheap, was prepared to become a pillar (Lol) There is not Impre also ... (Lol)
Because it is this price with Relay, honestly I was disappointed but it was betrayed in a good way.
By the way it is 35 w 6000 k.
In our Motorcycle, we do not need an adapter, so we can do it as simple as Halogen bulb. There was also no defective product such as Wire on the light-emitting part in cheap comes up.. In addition, in the case of a common Rubber part, in my case purchase a Circle cutter at 100 ha and if you open a hole of about 20 mm in diameter, Valve also comes with the attached Rubber packing just the same. Waterproof processing is not required. And you can just attach it to Headlight cleanly.
Because Ballast is also a compact, the degree of freedom of installation seems high. I also get the impression that the fitting of Connector is also not particularly dissatisfied and it is good for the price.
There was slightly dirty Valve, but it is sufficiently acceptable range from the price.
Is it about several seconds until the light stabilizes? Although this neighborhood depends on the subjectivity, I do not feel dissatisfied. I think that it is rather early.
I'm on a SUBARU car, but the same etc. I received the impression of the earliest.
There is neither strange luminescence nor glare with beautiful coloring. I am relieved that CutLight also comes out very beautifully. CutLight fell about 2 cm from Halogen, but I am using it as it is. This neighborhood depends on Lens and Reflector, so it is not bad.
Brightness is quite inevitable, does not it compare with Halogen. Blue It is a beautiful white color with less taste.
In my opinion, I think that it is close to Level which can safely say OEM.
There may be a win and loss, but this quality is satisfying with this quality at the price of Halogen bulb as a little better eyes.
It is unnecessary if you can do DIY somewhat, but the instruction manual is in English. For the Wiring diagram, please translate it into Manufacturer HP (Please enter here for the Wiring diagram so please refer to it.
It's only durability after that (Lol)
By the way it is good to have Valve out on the road, the replaced Halogen bulb is put in the ValveCase attached to this product and put under Seat.
View detail
Cost performance is the best
I bought it because I wanted to give a little LightUp to Motorcycle with Cowl. The price was pretty cheap, but the reason why Impression of other people was good is the reason why I chose this product.
We installed the installation place in the groove of the inner Duct so as to shine so that the light source can not be seen from the Side cowl heat emission Duct of Cowl car.
It is a relatively short distance from the Exhaust pipe of the Exhaust System, so I was a bit worried, but now it glows without a problem.
I was worried because it was cheap, but I think that the brightness is enough.
Quantity : Pair (for Left and Right) In, Quantity : By 2 pc, 4, the inside of Cowl is generally shimmer. I think that we can use with confidence by having Waterproof also.
Coloring and Length also have various Patterns, so it's a recommended item.
When installing in Cowl, of course there is also desorption, so do not forget Coupleretc. Do not forget to buy it! You can arrange them all at Emon.
View detail
Fits: HONDA FUSION [Fusion]., HONDA FUSION X, HONDA FUSION [Fusion] XX, HONDA HELIX, HONDA FUSION [Fusion]., HONDA FUSION X, HONDA FUSION [Fusion] XX, HONDA HELIX
Product fits well. Lens has a little more of a blue tint than pictured. Bulb supplied is inadequate. You'll need to purchase 1157NA or greater bulbs separately.
Product fits well. Lens has a little more of a blue tint than pictured. Bulb supplied is inadequate. You'll need to purchase 1157NA or greater bulbs separately. View detail