Reviews
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Blinker replacement
Replacement was easy, but the Valve needed to be replaced because it was a high flasher. View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Fits: その他 12V car
dark
The Front as well as the Rear are dark.
It is actually rated ??1, but I changed it to ??2 to account for the fact that it is being changed to a Smoked lens.
View detail
Cute rounded Tail lamp.
[How is it used?
I had made my own Fender Eliminator and used a DRC Tail lamp to refreshen the Rear area of my KSR-II, but I felt that it did not fit the round Image KSR and was looking for an alternative product. I was looking for an alternative when I found this product on Webike.
Was the one you received as per Image?
I think SPTakegawa had a product of the same design when LEDTail lamps started to appear in the world....
I remember that the LED bulbs were expensive and they were prone to break easily, so I had to replace them because they looked shabby and the glowing parts were gradually diminishing.
I remembered this after purchasing the product, but I installed it with a positive attitude, thinking that the reliability must have improved over the months that had passed since then.
The product is more than Image.
Was the installation difficult?
In my case, I made my own Material:Since the work was to install the Fender Eliminator on an aluminum Fender Eliminator bracket, drilling and wiring were performed on the Fender Eliminator side of the self-made Fender Eliminator (only the Tail lamp was used, not the Plate attached on the back side). (Only the Tail lamp was used and the Plate attached to the back side was not used).
This product is Universal Product. So I think Large, Small, or this kind of processing will be necessary.
After installing it on the Fender Eliminator, all you have to do is connect the wiring of this product to the wiring for the tail lamp on the body of the vehicle, but this product does not have the wiring that is often found in this type of product. "Bullet Type Terminal Spec
Modern motorcycles have connector terminals, so it is easy to find a connector that fits the harness side of the vehicle at KITACOConveniencePartsetc. and modify it to make a simple connection.
Fortunately or unfortunately, most of the terminals that connect to each light in KSR-II are Bullet Type Terminals, so it was possible to connect them with a small modification.
How was your experience with it?
The LED bulbs have not broken out like previous similar products mentioned above, so the functional part of the product has not been a problem so far (observation required).
My personal impression is that the rounded design of KSR and the slightly old-fashioned design of this product match each other and seem to fit together strangely.
[Included Parts:were they on?
It was a Simple Package with only a Tail lampBody, UniversalPlate, and a simple Instruction Manual.
[Was there anything that disappointed you?
Not at all.
I hope it is durable.
Other items that would be helpful
Point and hang of installation
This product is Tail lamp and UniversalPlate is Quantity:The play is a set product, but it should be considered only as a bonus, and you need to image how it can be installed in a good (or safe) manner in the vehicle you want to install it in before you start the processing. I'm thinking, "Huh? Maybe I should have mounted it a little higher (or lower)?" You may end up redoing the work because you are not convinced like I was (I'm not half disappointed...).
[Availability and clarity of the Instruction Manual
A simplified but illustrated Instruction Manual is included.
[Notes]
Nothing in particular, just be careful not to misplace Wiring.
[ITEMS TO BUY TOGETHER
As I mentioned above, it is sold by KITACO and others. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it is better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
Please keep up the good work in maintaining prices as much as possible and keep selling for a long time to come.
View detail
Fits: SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
It's getting brighter
The OEM had deteriorated and we replaced it with this less expensive one.
It reflects the light of the Valve well, so it is very easy to see and I am satisfied.
However, I changed to LED bulbs at the same time, and the light seemed to be slightly scattered, so I gave it 4 stars for visibility.
I don't think Halogen or OEM Valve would mind.
View detail
Simple&Compact
[How is it used?
I bought a used WR250R a few years ago with a Fender Eliminator Kit from Other Brand Product.
The Fender Eliminator itself was fine, but in my opinion, it had a tail lamp that was not suitable for the vehicle, so I purchased this product to replace it.
Did you receive the item as per the Image?
The product received is more Compact and thinner than I expected, and depending on the position setting, it looks I don't think the tail lamp is installed!" The product was so large that I felt it was more than Image could provide.
Was it difficult to install?
The functional aspect of the Lamp is completed when the originally installed Bullet Type Terminal for connection is removed and connected to each.
My WR250R has Other Brand Product's Tail lamp as mentioned above, and it was originally Bullet Type Terminal connection, but I replaced the Bullet Terminal on the product side because the terminal size was a little too large. 1 pc is Grounding Wire (Black) I can't remember which is which... sorry.
The Fender Eliminator can be installed without any modification because the holes were aligned well with the original holes for installing the Tail lamp.
If you buy the OEM type connector for each manufacturer sold by KITACO and connect Wiring, Wiring will be refreshed and you can easily return to NORMAL when you want to. If you want to return to NORMAL, you can easily do so.
How did you like it?
The Tail lamps are fixed in a safe position because they can be involved in unexpected accidents such as rear-end collisions when driving on public roads if they are not clearly visible. (I have a friend who says that I am over-refreshing...) I personally have nothing to say.
Was "Included Parts:" attached?
It is a very Simple product with all the product images shown in Webike's product section.
Were there any disappointments?
Not at all.
Because of the low price, I was worried that the LED bulbs would burn out, but they have been functioning without problems for several years since they were installed.
Other items that would be helpful
Point and hang of installation
If you want to process Wiring as beautifully as OEM, use the OEM Type Connector by Manufacturer as described above! (Since this is a personal judgment, those who are fine with Bullet Terminal can leave it as it is, but since it is an insulated tape, please make sure to perform waterproof treatment.) 。
[Availability and clarity of the Instruction Manual
electrical system (?) I think this is a very straightforward product for the
[Notes]
Nothing in particular, just be careful not to misplace Wiring?
[ITEMS TO BUY TOGETHER
As I mentioned above, this is also available from KITACO and other companies. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it may be better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
The price is low and the product is Compact, so it is a highly universal product.
View detail
Fits: その他 12V car
It's dark
Not enough illumination. From a fellow who went Touring with me. "can not see" It was pointed out to me that this is not a problem at night. I think it is fine at night, but in good weather during the daytime, visibility is insufficient. I have a Blinker lens. [Color] I think some of them are in Smoke, so I decided to use ??2. By the way, the Right Side of the image is our product. I thought it was dangerous, so I bought brighter LEDs. (Left Side) View detail
Fits: HARLEY-DAVIDSON sportster, HARLEY-DAVIDSON softail, HARLEY-DAVIDSON Dyna., HARLEY-DAVIDSON FLSTF Fatboy, HARLEY-DAVIDSON FLSTFB Fat Boy Low, HARLEY-DAVIDSON FXCWC Rocker C, HARLEY-DAVIDSON FXD Super Glide, HARLEY-DAVIDSON FXDB Street Bob, HARLEY-DAVIDSON FXDC Super Glide Custom, HARLEY-DAVIDSON FXDF Fat Bob, HARLEY-DAVIDSON FXDL Low Rider, HARLEY-DAVIDSON FXDWG Wide Glide, HARLEY-DAVIDSON FXST Softail Standard, HARLEY-DAVIDSON FXSTC Softail Custom, HARLEY-DAVIDSON XL1200C 1200 Custom, HARLEY-DAVIDSON XL1200CA 1200CA Limited, HARLEY-DAVIDSON XL1200CB 1200CB Limited, HARLEY-DAVIDSON XL1200CX Roadster, HARLEY-DAVIDSON XL1200T Super Low 1200T, HARLEY-DAVIDSON XL1200V Seventy-Two
Compact and GOOD
With OEM, it's not so bad hanging from Handlebar, but I'm getting tired of it, so I changed Blinker.
Front is this product and Rear is Active's NumberBlinker.
The work is just to cut off the Wiring and connect it.
First, Rear was assembled and test lighted. Normal. Ceramic resistor was installed.
Front is co-tightened to Mirror, and a resistor is engaged to test the light. Hazard lights up no matter how many times I try.
The resistor was removed and reassembled.
I don't know, but okay.
The brightness is sufficient, so I would like to think it will pass inspection.
Of course, it comes with EMark, so it should work.
View detail
It's dark
Halogen is better for this, it is darker. View detail
Good visibility
I feel that it is bright when lit and has good visibility. View detail
Fits: BUELL M2CYCLONE, HONDA CB1000SF, HONDA CB1100RS, HONDA CB1300SF, HONDA CBR1000F, HONDA CBR600F, HONDA VFR750R, HONDA X4, HONDA X4, KAWASAKI ZRX1100-2, KAWASAKI ZRX1200, KAWASAKI ZXR750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, Others , SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1100
I'd pay a little more if I had to.
I bought this to replace the Front suspension with an XJR1300.
We have to buy a new 43mm front fork, so we have to buy a new Headlight Bracket and everything else.
I had to get Parts to get started, so I bought them in a hurry and was amazed at the quality.
To be honest, I had never heard of a Brand called Rise Corporation, and I didn't have high expectations.
The quality of the cutting and the texture of the Anodized are perfect, although from the price and the Package received, it is probably imported from a factory in China or Taiwan.
I purchased Black and there was no unevenness in color.
Some aluminum cut-out parts of this kind seem to have poor quality and strength, but since it is a headlight bracket, there is no need to worry that much.
If it is a Harley or BigSingle engine Motorcycle, it might be different.
I will use it, at least in the case of my Motorcycle, as it is not a problem.
If it should break, I might buy it again at this price.
Incidentally, since the hole for Blinker is 10mm in diameter, some countermeasure is necessary when installing the recent Small Type Blinker.
View detail
Fits: その他 12V car
cheap construction
Very cheaply constructed.
No light when inserted deeply, light when inserted lightly, but wobbly.
Obvious defective product or design error
View detail
Fits: その他
I still prefer BlinkerLED.
Is it good that the current consumption has been reduced or is it slightly darker that the LEDs were replaced? View detail
Sufficient light even in Compact
[How is it used?
I purchased this for a Rear blinker.
Was the one you received as per Image?
I received the same as the picture on the Product Page.
Was the installation difficult?
Installation was easy with M8 Bolt + Nut as there is a φ8mm hole.
I prepared a separate Bracket for Blinker with Number co-tightening.
I think it will require some ingenuity depending on the type of car.
Wiring was separately prepared and installed with a 2-poleCoupler.
Wiring work such as crimping is required.
How was your experience with it?
It is a Blinker, so the brightness is Main, but it is very bright and visibility is not a problem.
Case is also Material:Aluminum for durability
[Included Parts:were they on?
No Included Parts:Bolt and terminals for installation must be prepared separately.
Also, since it is LED Light, I think Relay for LED will be necessary.
[Was there anything that disappointed you?
The Lens and Aluminum Case are separate parts.
Since the fixing is only one Small Screw, I am worried about the Screw falling due to vibration.
I removed it once, applied Screw lock agent and reassembled it.
View detail
Fits: SUZUKI GSR600, SUZUKI GSR400, YAMAHA BT1100, SUZUKI Bandit 1250, SUZUKI Bandit 1200S, SUZUKI Bandit 1200, SUZUKI RF900, SUZUKI GS1200SS, HONDA VFR750R, HONDA CB1100RS, BUELL M2 Cyclone, その他 , SUZUKI GSX-R1100, SUZUKI Inazuma 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FZR400RR, YAMAHA V-MAX1200, TRIUMPH thunderbird (North-American indigenous mythical spirit bird), TRIUMPH Trophy 900
Very Nice
Fits CB1300 pretty well, machining quality is top notch This relplaces the bulky headlight bracket and signal light holder. View detail
Fits: HONDA CB-1, HONDA CB250RS, HONDA CB250RSZ, HONDA CBX250RS, HONDA CL400, HONDA GB250 Clubman, HONDA superhawk, HONDA Super Hawk 3, HONDA Zervis., HONDA Hawk 2 CB400T, HONDA Hawk 3 CB400T, HONDA Hawk CB250T, KAWASAKI GPZ250R, KAWASAKI GPZ400/F/F2, KAWASAKI KR250/S, KAWASAKI Z250FS, KAWASAKI Z250FT, KAWASAKI Z400GP, SUZUKI GF250, SUZUKI GF250S
Headlight Bracket For 31mm
About quality and texture be neatly finished in black About the feeling of use I decided to compromise a little and use it, but it doesn't fit Products to buy together Winker bracket, bolt, nut, Difficulty of installation It's hard. It's not for APE100, so I installed it differently from the description Cost performance and comparison with other products I recommend other products even if they are expensive. It's not easy to install because it's a general purpose product. About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought this product because I wanted to finish it in black, but it doesn't fit well with ape100 because it's general purpose. I just read what was written in the review. So, contrary to the explanation, I installed it in reverse Bracket As the width narrows, the headlights spread out little by little, so I'm going to compromise moderately There was no Winker bracket, so I installed it as a standard Winker and it became Mickey Mouse View detail
Power consumption is only low.
It is clearly darker than Halogen.
We contacted Manufacturer.
This product is darker than Halogen bulbs, but not brighter.
The Company does not guarantee the accuracy or completeness of the information provided.
The response was.
It cannot be used for Headlight.
View detail
There wasn't enough light.
I replaced the HI with the 01 BANDIT 1200 HI, but the Halogen is brighter and disappointing… It's a Projector Headlight, so it doesn't seem to be an optical axis adjustment issue. View detail
Fits: HONDA FORZA [Forza] (MF06), HONDA FORZA [Forza] (MF06)
Turn signals forsa mf06
Excellent fit and quality. This prduct arrived quicklly and packaged very good. I would highly reccomend for a custom look. View detail