Reviews
Fits: HONDA CB-1, HONDA CB250RS, HONDA CB250RSZ, HONDA CBX250RS, HONDA CL400, HONDA GB250 Clubman, HONDA superhawk, HONDA Super Hawk 3, HONDA Zervis., HONDA Hawk 2 CB400T, HONDA Hawk 3 CB400T, HONDA Hawk CB250T, KAWASAKI GPZ250R, KAWASAKI GPZ400/F/F2, KAWASAKI KR250/S, KAWASAKI Z250FS, KAWASAKI Z250FT, KAWASAKI Z400GP, SUZUKI GF250, SUZUKI GF250S
Headlight Bracket For 31mm
About quality and texture be neatly finished in black About the feeling of use I decided to compromise a little and use it, but it doesn't fit Products to buy together Winker bracket, bolt, nut, Difficulty of installation It's hard. It's not for APE100, so I installed it differently from the description Cost performance and comparison with other products I recommend other products even if they are expensive. It's not easy to install because it's a general purpose product. About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought this product because I wanted to finish it in black, but it doesn't fit well with ape100 because it's general purpose. I just read what was written in the review. So, contrary to the explanation, I installed it in reverse Bracket As the width narrows, the headlights spread out little by little, so I'm going to compromise moderately There was no Winker bracket, so I installed it as a standard Winker and it became Mickey Mouse View detail
Power consumption is only low.
It is clearly darker than Halogen.
We contacted Manufacturer.
This product is darker than Halogen bulbs, but not brighter.
The Company does not guarantee the accuracy or completeness of the information provided.
The response was.
It cannot be used for Headlight.
View detail
There wasn't enough light.
I replaced the HI with the 01 BANDIT 1200 HI, but the Halogen is brighter and disappointing… It's a Projector Headlight, so it doesn't seem to be an optical axis adjustment issue. View detail
Fits: HONDA FORZA [Forza] (MF06), HONDA FORZA [Forza] (MF06)
Turn signals forsa mf06
Excellent fit and quality. This prduct arrived quicklly and packaged very good. I would highly reccomend for a custom look. View detail
Fits: その他
Position side could not be lit.
The Blinker can light the Pilot lamp, but the Position lamp cannot light the Pilot lamp.:Pair (for Left and Right) Both are lit bonderly.
Plus contact of the mouth Gold, since we could see continuity between the two, did it not match the vehicle?
View detail
Fits: その他 12V car
sr400 1.5w To led Sequential Blinker
12v1.5w on body sr400 To led Sequential Blinker
High flasher did not improve and became very hot within a minute, so I stopped using it.
View detail
It's bright
This is the second time I have purchased the License Plate Light and the tail light short due to my own wiring error. I took measures against vibration, mounted them on an aluminum plate, and fixed them to the License Plate Bolt. View detail
Cheap and surprisingly durable! I expect it to be durable as well.
[How is it used?
I bought it to replace a DRCBlinker that was damaged while driving on a forest road. I bought the Sequential type, which was still rare at the time of purchase, for a trial price because it was sold at a discount.
Was the one you received as per Image?
A friend had previously used a non-sequential Blinker of the same design, which was not sequential, so the product looked just like the Image.
Was the installation difficult?
Since the previously installed DRCBlinker was an LED Type and the ICRelay had already been replaced, installation of this product was a simple matter of replacing four BlinkerBodies.
How was your experience with it?
The sequential lighting was very interesting when it first came on after installation, but I soon got used to it.
Visibility is a little poor during the daytime when the sun is strong, perhaps due to the thin body shape. Visibility is perfect from evening to night.
Mounting part is Material:Rubber will take some of the impact, so you don't have to worry about falling over on forest roads.
[Included Parts:were they on?
Nothing, no Instruction Manual.
[Was there anything that disappointed you?
If you can buy a Sequential type Blinker at this price, it is good enough.
I have been using it for about 2 years and the LEDs have never burned out, etc., and it is functioning well.
0Other items that may be useful include
Point and hang of installation
The factory-installed terminals are Plug type. So after purchasing, you need to replace it with your Motorcycle's connection terminal.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but it is an easy-to-understand product.
If you are not confident "Decent friend." ask the PRO for help.
[Notes]
If the OEM blinker is a Motorcycle that does not have LEDs, replace the LED resistors or ICRelay with LED-compatible ones.
[ITEMS TO BUY TOGETHER
For vehicles with Valve bulbs in the OEM Blinker as described above, please purchase and install LED-compatible resistors or ICRelay for LEDs.
[Opinions and requests to Manufacturer
I would like to see a lineup of types with different designs at the same price.
View detail
To be used for KSR80
I bought this Switch to add Hazard functionality to my KSR80.
It is not yet installed as there are many issues to be addressed.
Switch, but Material:The quality of the plastic product is not good, but I think the quality is good enough for this price.
There is no Instruction Manual (I am convinced that the absence of one is indicated in the sales comments), so it is tough if you lack electrical knowledge.
I need to drill a hole in Panel, but I don't know how much hole to machine.
Even if you use Bracket, there are no instructions for board thickness, so Switch may rattle if you have a thin panel.
For people who are not afraid to make a billion mistakes. 。 For those who have difficulty, it would be better to purchase a similar product from a well-known manufacturer.
View detail
light
I bought it because I wanted to lighten the weight around the Handlebar.
The OEM's Headlight is just gone, as they wanted it to be.
The handlebar area has become very light, and handling has become lighter.
Mirror was also changed to Trial mirror at the same time.
Significant weight reduction.
The drawback is that the lights are dark, almost invisible, etc., so be careful when driving at night.
View detail
Fits: KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Before changing the Light, you need to make a change.
The OEMLight felt dark and I thought it would be a good idea to try and change the angle of the light before changing the Light itself, so I replaced it.
There is a considerable change.
good point
●Tunnel, easy to see even when driving at night.
Because of the angle of the light, even OEM type Halogen bulbs are bright enough.
No need to worry about vehicle inspection.
Less expensive than changing the light.
A bad point
The replacement itself is not difficult, but it is troublesome because it involves disassembling the light case.
I think it is one hand to change to HID or LED, but there is also the problem of car inspection. I think it is safer and less expensive to use the brightness of the original Halogen bulb.
View detail
I wanted a Red Lens but they didn't have one.
I installed it as a supplement to the Stop/Tail lamp. 。
It's hard to tell from the picture, but I think the visibility is high when the stop lamp is on.
View detail
Fits: HONDA CB-1, HONDA CB250RS, HONDA CB250RSZ, HONDA CBX250RS, HONDA CL400, HONDA GB250 Clubman, HONDA superhawk, HONDA Super Hawk 3, HONDA Zervis., HONDA Hawk 2 CB400T, HONDA Hawk 3 CB400T, HONDA Hawk CB250T, KAWASAKI GPZ250R, KAWASAKI GPZ400/F/F2, KAWASAKI KR250/S, KAWASAKI Z250FS, KAWASAKI Z250FT, KAWASAKI Z400GP, SUZUKI GF250, SUZUKI GF250S
Because of the top bridge, headlight STAY...
Because of the top bridge, headlight STAY... I bought it because I had to change it. I was looking forward to it. It doesn't fit perfectly with "ape100". There's a gap between the headlight stay and the headlight, so bushing is essential. View detail
Fits: その他
Visibility is good.
The smoked lens makes it easy to see whether the blinker is on or off by the reflection of sunlight, which improves safety. When the indicator is displayed, the LED light is very bright and increases the visibility. The shape is also sharp and stylish. View detail
It's good for the price.
The depth is a little deeper than OEM, and it interferes with the key cylinder. At any rate, I was able to install it. I haven't run the car yet, so we will see how it looks. View detail
Fits: その他
HIDFull kit
[How is it used?
Halogen bulb of TDM850 is out, so I decided to replace it with HID.
Was the one you received as per Image?
I cancelled my order once and reordered, changed from H3 to H1.
Was the installation difficult?
The TDM850 was a Lamp replacement Large odd. The place is small and hard to get to.
How was your experience with it?
Large Variety Satisfaction
[Included Parts:were they on?
It was attached, but there was no Fixing Screw, so I fixed it with Double-sided Tape.
[Was there anything that disappointed you?
Installation/WiringManual is not good.
Other items that would be helpful
The Instruction Manual is difficult to understand.
View detail
Not too bright to be noticeable in the daytime
[How is it used?
I use it for the position lamp of my commuter vehicle SUPER CUB110.
Very easy to use, just replace from OEM Valve.
Was the one you received as per Image?
The shape is as Image, but the length is longer than I expected and interferes with Light case.
I'm using it as is for now.
Was the installation difficult?
There is nothing particularly difficult about it.
If you plug it in and it doesn't light up, you can reverse the installation and the Large outline will light up.
How was your experience with it?
My impression is that it's not as bright as I thought it would be.
It's a Position lamp so it's not really a problem, but I didn't get as much performance as the price.
View detail
Large volume
[How is it used?
horn
Was the one you received as per Image?
It's about as large as two Whirlpool Horns, so you shouldn't judge it by the picture alone.
Was the installation difficult?
If you have the knowledge of Wiring, you can install it easily.
How was your experience with it?
High-pitched and Large volume.
[Included Parts:were they on?
Mounting Hardware、RelayWiring
[Was there anything that disappointed you?
Translation (There is no instruction manual to enter here.
View detail
No visibility to other vehicles.
I've been driving with it for a while, but the visibility of the blinker is not good and it seems that the warning to other cars is hard to be transmitted when turning RightLeft. View detail
LED Tail Lamp
Installed on CB223.
It's nice and clean around the Tail.
View detail