Reviews
Fits: YAMAHA MAXAM [Magzam] (SG17J/SG21J)
MAXAMFront wheel Disc Rotor
When I got the MAXAMFront wheel and tried to install it on MAJESTYC, I realized that the MAJESTY and MAXAM discs were not compatible, so I had to order one in a hurry.
I chose it for availability and price because I don't think there is any need to be concerned about OEM for a street-use scooter.
The entire DISC is still machined, so discoloration around the hub is a future concern.
View detail
Fits: YAMAHA TZR250, YAMAHA XJR400, YAMAHA TDM900, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA MT-01, YAMAHA FZR600, YAMAHA FZR600, YAMAHA YZF600 THUNDER CAT [Thundercat]., YAMAHA YZF-R6, YAMAHA FZS1000 FAZER [Feather]., YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA ROADSTAR1600 [Roadster]., YAMAHA ROADSTAR1700 [Roadster]., YAMAHA TZr125 R (4DL) for Front, YAMAHA TZr250 R (3XV) for Front, YAMAHA TZr250 RS (3XV) for Front, YAMAHA FZr400 RR (3TJ) for Front, YAMAHA FZr600 SFAZER 98 for Front
Brake Pads
This is the first time I have purchased and used this Manufacturer's Brake Pads.
I've only replaced them with less than 200km of driving, but the effect is a little softer than my previous Brake Pads.
I think it's like
I am hoping that after a few more runs, it will adjust and become the ideal effect for me.
View detail
Fits: Others
You can get the feeling of doing it even with such small parts.
Pad pin of bremboOEM is a little Large strange to remove! View detail
Fits: KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI W650 EJ650A, KAWASAKI KZ400, KAWASAKI EX500S, KAWASAKI ESTRELLA [ESTRELLA] RS Custom BJ250A, KAWASAKI ESTRELLA Custom BJ250A, KAWASAKI ESTRELLA [Estrella] BJ250A, KAWASAKI ELIMINATOR250 [ELIMINATOR]SE EL250A, KAWASAKI ELIMINATOR250 [ELIMINATOR] V VN250A, KAWASAKI 250TR BJ250F, KAWASAKI 250TR BJ250F, KAWASAKI Z400LTD Belt Drive KZ400H 83, KAWASAKI Z250LTD Belt Drive KZ250R 83-87, KAWASAKI W650 EJ650A 05-08, KAWASAKI KZ440Sport Belt 82, KAWASAKI KZ440LTD Series 83, KAWASAKI KZ440LTD Series 80-82, KAWASAKI KZ440LTD Belt 83
The best!
It is perfect. I contacted Webig first and received an immediate response. It is not easy for me to ask myself, "Will this product be compatible? I am very relieved because I asked Webig about it before purchasing. The product is as good as OEM. I am not sure about the durability of the product yet, but the low price and quick shipping was a big help. I will continue to use your company for many years to come. View detail
Fits: YAMAHA Cygnus X (SR44J) Rear, YAMAHA Cygnus X (SE44J) Rear, YAMAHA BWS125, YAMAHA BWS125, YAMAHA Cygnus X, YAMAHA Cygnus X
Rear brake lining (OEM equivalent) Keisensha 1~3 type
[How is it used?
I bought it this time for the 3RD jade game as a countermeasure against the expiration of my points.
Except for the Jingjing battle, it can be used for FLAME-X and BW'S125 and GTR125, which share the same EG.
Was the one you received as per Image?
Image (Gold) It was Silver.
The box is too big for shipping.
Was the installation difficult?
It would be super easy, but would require some maintenance skills.
The tightening torque for the rear wheel center axle is about 10 kg. A torque wrench is required.
How was your experience with it?
No difference between OEM and Large. Low cost and usable. Cost-effectiveness is the top priority.
[Included Parts:were they on?
The spring quantity is the same as the spring quantity of the other company's product.:No 2pc, but not particularly troublesome.
[Was there anything that disappointed you?
The friction material used is different, so the bite during braking is inferior to that of Daytona.
I don't really care about it because it's price-applicable.
View detail
Fits: Others
Long?
It's much longer than the original pad pin, is this correct? If anyone knows, please let me know. View detail
Fits: Others
One point
OEM brembo pin, Thailand is a little weird to remove. It is really tiny one point and shiningly! I'm satisfied with it, but I'll pay more if it's a little bit cheaper. View detail
Fits: YAMAHA TZ250GP, YAMAHA TZ250, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R400R GK76A, SUZUKI GSX-R400R GK76A, SUZUKI GSX-R1100 GV73A, SUZUKI GSX-R1100, TRIUMPH TT600, TRIUMPH TT600, TRIUMPH TROPHY900 [Trophy 900]., TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH SPRINT ST [Sprint]., TRIUMPH SPRINT ST [Sprint]., TRIUMPH SPRINT [Sprint] RS, TRIUMPH SPEED FOUR, TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH Rocket III Classic
This is enough♪
It was time for a replacement, so I purchased Repeat.
I was thinking of using a Type above a top ranking, but...,
As a result, we decided to use the same Type as the previous one, which has a proven track record.
If you want to go to the Corner while leaving the Brakes behind, you can do so.
I would like to have just a little bit of Control...,
And that's good enough for me, overall.?
View detail
Fits: YAMAHA XT400E ARTESIA 4DW, YAMAHA TZR50R 4EU, YAMAHA TZR50R 3TU, YAMAHA TZM50R 4KJ, YAMAHA TDR125R 3SH, YAMAHA YSR80 3AX, YAMAHA YSR50 2UE, YAMAHA YSR50 2AL, YAMAHA XT500 3ST, YAMAHA XT500 3BH, YAMAHA XT400 4DW, YAMAHA XT350 3NV, YAMAHA XT250T 48Y, YAMAHA serow225 [serow] w 4jg, YAMAHA SEROW225 [SEROW] 1KH, YAMAHA DT80 53W, YAMAHA DT80 2UW, YAMAHA DT50R 4CT, YAMAHA DT50R 3HL, YAMAHA DT200R 3ET
good on cost
Used on the Front of YAMAHA YSR80.
The control is neither good nor bad.
I don't know about the durability performance yet, but since it is for commuting, I think it is a repeat purchase at this price.
View detail
Fits: SUZUKI WOLF250 [Wolf] VJ21A, SUZUKI TL1000R VT52A, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI RG250γ GJ21A, SUZUKI RG250γ GJ21A, SUZUKI RF600R, SUZUKI Katana 600, SUZUKI Katana 600, SUZUKI INAZUMA400 [INAZUMA] GK7BA, SUZUKI INAZUMA1200 [INAZUMA] GV76A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX-R750W, SUZUKI GSX-R750W, SUZUKI GSX-R750SP, SUZUKI GSX-R750R
Surprisingly good.
I have experience with Front, but this is my first time with Rear, so I'm not sure yet, but it's the same product, so I'm not sure about Control.
Was good
I think the durability will hold up pretty well since I don't use it as much as Front.
View detail
Fits: SUZUKI SV1000S VT54A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI GSX-R750, SUZUKI GSX-R600W, SUZUKI GSX-R600, SUZUKI GSX-R400 GK71F, SUZUKI GSX650F, SUZUKI GSX600R, SUZUKI gsx1100s katana gu76a, SUZUKI GSR600, SUZUKI GSR400 ABS GK7EA, SUZUKI GSR400 ABS GK7EA, SUZUKI GSR400 GK7EA, SUZUKI GSR400 GK7EA, SUZUKI GSF1200 GV79A, SUZUKI GSF1200 ABS GV79A, SUZUKI Bandid 1250 ABS GW72A, KAWASAKI ZZR400 ZX400N, KAWASAKI ZZR400 ZX400N
Cospa best
This is sufficient as it can be used from Circuit to Touring without any problems!
Control was good and durability was especially good, so this is my standard!
View detail
Fits: KAWASAKI KLX140, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, YAMAHA TT250 R, TRIUMPH SPEED MASTER 800, YAMAHA XTZ750 SUPERTENERE, SUZUKI DR250 S HE SJ44A, SUZUKI DR250 S SJ44A, SUZUKI DR250 SH SJ44A, SUZUKI DR350 DK41A, SUZUKI DR350 S DK41A, SUZUKI DR350 SE DK41A, SUZUKI RMX250 S PJ13A, SUZUKI RMX250 S SJ13A, YAMAHA DT200WR 3XP, HONDA REBEL 125, HUSQVARNA WEX610, HUSQVARNA WMX125, HUSQVARNA WMX250
I had never considered RearPad in depth!
DownshiftEngine braking is used to enter the Corner, so I don't use the Rear brake as much, but it is best to feel the Touch-fee Ring and braking sensation when it is needed. View detail
Replace before it rusts
I changed the rear to a Crab caliper and after running for a while, I saw that the wheel was covered in dust and it rusts when wet. I was thinking of replacing the pad and while I was researching what would be good for it, I found out that the OEM pad pin was a bit of a nuisance.
Rusty, sharpened, and large to pull out. If you are going to replace the pad after reading such a review, you should also replace the pin. Material:Titanium and half the price of Koken! There is no reason not to choose them!
I don't know the manufacturer, RISE, but from what I've seen, it's solidly built, no bali or weird distortion, and it feels and looks like Titanium, but I don't know if it's 64 or not.
I started the installation work immediately, and it is true that the OEM pin is a press-fit, so it is difficult to pull it out. I also wonder if it is also affected by the pad spring pushing on it. It's a bit of a hassle to pull it out with Hammer and tools, to be sure. Quickly replace it with a new pad and plug in the Titanium pin. I had been wary of this pad because I had read on other pad replacement blogs that the spring that holds the pin was troublesome, and it seemed to be having a hard time shrinking, but then I realized that even with my non-dominant left hand, I could easily insert the spring with a little effort. I could insert it easily with my non-dominant Left hand.
The part is subject to rubbing, so it is advisable to apply a thin coat of grease to the surface.
I thought Titanium was not so resistant to abrasion...
Well, it's not expensive, and if it's worn out when you replace the pad, you can replace it, but it's better than rusting out.
View detail
Fits: SUZUKI WOLF250 [Wolf] VJ21A, SUZUKI TL1000R VT52A, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI RG250γ GJ21A, SUZUKI RG250γ GJ21A, SUZUKI RF600R, SUZUKI Katana 600, SUZUKI Katana 600, SUZUKI INAZUMA400 [INAZUMA] GK7BA, SUZUKI INAZUMA1200 [INAZUMA] GV76A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX-R750W, SUZUKI GSX-R750W, SUZUKI GSX-R750SP, SUZUKI GSX-R750R
Price suitable
I put it in Rear.
It doesn't stop at a reasonable price.
It did not lock even when I stepped on the Brake quite hard.
Control was a good feeling, so I am satisfied with it.
View detail
Fits: SUZUKI DR250 SE for rear, KAWASAKI KDX250 R for rear, YAMAHA YZ250, YAMAHA YZ125, SUZUKI TS200R, SUZUKI RM250, SUZUKI RM125, SUZUKI DR650 SE, KAWASAKI KX500, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX650, YAMAHA YZ250WR 90 for Rear, YAMAHA XT250 X DG17J for Rear, YAMAHA XG250 TRICKER DG10J for Rear, YAMAHA WR500 Z 92-93 for Rear, YAMAHA WR200 92-97 for Rear, YAMAHA WR125 91-97 for Rear, YAMAHA TY250Z SCOTISH 4ML for Rear, YAMAHA TT600 R 93-95 for Rear
TouringSEROW
It was a gamble purchase as it was not listed in the compatibility chart, but it was installedLarge sturdy. The price is too low and I wish they would offer more shipping options. View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
Stops well and lasts long
I didn't expect it because it was so cheap, but it is a very good product.
Stops well and lasts a long time.
There is no absolute power production, but it is fine for normal use.
Recommended
View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
It is a good item
We used this product because the OEM Product was discontinued and we had no choice.
It is a good and inexpensive product.
I'm not sure how well it works in Circuitetc., but just a normal ride.
Then I don't think it will be a problem.
View detail
Fits: HONDA CB50, SUZUKI RM65, SUZUKI RH125, SUZUKI DR200, HONDA MB5, HONDA CR80R, SUZUKI TS250 X 87-89 for Front, SUZUKI TS125 X 85-88 for Front, SUZUKI SX200R SH41A for Front, SUZUKI SX125 R 85-91 for Front, SUZUKI SP250 85 for Front, SUZUKI SP125 86-88 for Front, SUZUKI RA125 SF13A for Front, SUZUKI GX125R 88 for Front, SUZUKI DR125 S SF41A for Front, SUZUKI DR125 E SF41A for Front, SUZUKI DJEBEL200 SH42A for Front, SUZUKI DJEBEL125 SF44A for Front, KAWASAKI KX65 KX65A for Rear, KAWASAKI KSR110 KL110A for Rear
Purchased for Eliminator125
I bought this for my Eliminator125 that I purchased a year and a half ago. I purchased the Eliminator125 at a certain Shop, but the Brake Pads were worn out, and the Slide pin on the Brake Caliper was solidly stuck and not working, so I think the Brake Pads were worn out. I believe that the Brake Caliper was not working solidly and that the Brake Pads were worn out. I bought a new used Caliper, replaced the packing, overhauled the Brake Caliper, changed the brake wheel, and installed this Disc Brake Pads. Slide pin and Piston are now working smoothly and the Brake is now working at its best.
I don't know about durability, but I think it is a bad product.
View detail
Although it is not the original part to be used...
The product name is for a brake rotor, but the bolt size was just right and the color was good, so we used it for a bolt for fixing a license plate. View detail
I got it right.
brembo GP4-RB (108mmPitch) Used in
I was nervous about ordering because I read in another review that there was only 1 pc in one product.:Set of 2pcs.
Therefore, one product is equivalent to one Caliper above.
It is not a Titaniumium coating but Titanium itself.
It is inexpensive for what it is.
Conscientious.
The bremboOEM pad pin is shaved off when the pad pin is removed and inserted, but this product is hard enough to easily enter the pad, which is good for mental health.
This type of parts usually arrives over-packaged, but this product arrives in very simple packaging.
I think this is probably an Asia import, but it is hard to say that the parts are not severe in practical dimensions, etc., and I do not see any practical problems with the product I actually received.
What I personally expect is the corrosion resistance of Titanium, which I think will be enough to satisfy me when it is Titanium.
In addition, βPin is also included.
These places are also very modest and conscientious.
(Relatively speaking) This is an inexpensive option to titaniumize Caliper's Pin.
It is not suitable for those who are Brand-oriented in every detail, but it is recommended for those who want Titanium in terms of functionality.
View detail