Reviews
Easy dress-up
First, one of the two Bar Ends was defective in size and did not fit into the inner diameter of the Handlebar as it was. The other one was fine, so it must be defective.
It was a Level error that I could manage by sanding it myself, but it was a hassle and I would have been happy to return and exchange it. Other than that, I am satisfied with the quality and design.
I installed it on a SV650X Handlebar, but did not use anything that came with it except the Bar End, and reused the Screw, Rubber, and Weight that I removed from the original Bar End.
View detail
If it could be positioned more precisely, there would be nothing to say.
The Arm that holds the Mirror rotates parallel to the Handlebar and positions it to the Large side, but it cannot be fixed at any position. If the Arm is fixed by extending the Arm outward from the Handlebar End, the width of the car may become too wide, which may be illegal. If the Arm is fixed by extending the Arm outward from the Handlebar End, the width of the car may become too wide, and it may be illegal.:), so just moving it by 1Click is quite inward, and your arm is reflected in Mirror quite a bit. Naturally, you cannot see directly behind you. This is a little disappointing.
Triumph's Bar end mirror looks like it would be easy to see.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Better than OEM
Replaced because OEM is too hard to see. Installation was easy. I can't say how visible the OffsetHolder is since it was replaced at the same time, but it is more visible than the NORMAL. View detail
Fits: YAMAHA Cygnus X (SR44J) Rear, YAMAHA Cygnus X (SE44J) Rear, YAMAHA BWS125, YAMAHA BWS125, YAMAHA Cygnus X, YAMAHA Cygnus X
Rear brake lining (OEM equivalent) Keisensha 1~3 type
[How is it used?
I bought it this time for the 3RD jade game as a countermeasure against the expiration of my points.
Except for the Jingjing battle, it can be used for FLAME-X and BW'S125 and GTR125, which share the same EG.
Was the one you received as per Image?
Image (Gold) It was Silver.
The box is too big for shipping.
Was the installation difficult?
It would be super easy, but would require some maintenance skills.
The tightening torque for the rear wheel center axle is about 10 kg. A torque wrench is required.
How was your experience with it?
No difference between OEM and Large. Low cost and usable. Cost-effectiveness is the top priority.
[Included Parts:were they on?
The spring quantity is the same as the spring quantity of the other company's product.:No 2pc, but not particularly troublesome.
[Was there anything that disappointed you?
The friction material used is different, so the bite during braking is inferior to that of Daytona.
I don't really care about it because it's price-applicable.
View detail
Horn Replacement
I'm not sure of the effect yet, but it's a hell of a lot better than the pathetic sound of NORMAL. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
V125S Screw (forward/reverse) must be confirmed
MyMotorcycle V125S Mirror was selected from the hit items in the search from the state that had been set to
Hit, 10mm Normal Thread Screw But when I actually tried to attach it to the vehicle, I found that it was 10mm Opposite Thread Screw was
By year etc, Positive/reverse." It is always better to check the direction of the Screw on the actual car, as there seems to be
As a result, we purchased an additional Conversion Adapter (at a local store because we were in a hurry).
Quality *2:Because Mirror moves due to running vibration (maybe product difference?)
Visibility *2:Because the cut area of the Fashion oval is less visible than the OEM oval due to the reduction in area.
Design★4:Other Brand:Because the sense of product has been improved.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker, KAWASAKI KDX220, KAWASAKI 250TR, KAWASAKI KSR110, SUZUKI RMX250, SUZUKI 250SB, SUZUKI HUSTLER, SUZUKI DJEBEL, YAMAHA TW200, YAMAHA XT250X, YAMAHA TT250R, YAMAHA SEROW, YAMAHA XTZ125, YAMAHA WR250, YAMAHA DT50, YAMAHA PW50, HONDA FTR250, HONDA CRM250R, HONDA CRF450
Anyway, it's the lowest price in Fat bar!
I thought I bought the High type, and it says so in the Package...
I have compared it with Landy's Low type, but the height is the same...
Huh? Isn't it low? Something doesn't seem right. 。 It's probably not your imagination.
The handlebar is quite high on the VST250SX, so I managed to install it with three clamp extensions.
This seems to be a bit of a turnaround...
In addition, since there is a hole in the blinker and the Axel collar, I cut it out and wrap a piece of tape used for tennis racket or bicycle grips around it to prevent it from slipping.
It's working surprisingly well.
View detail
Fits: HONDA monkey, HONDA glom, HONDA CHALY 50, HONDA GORILLA, HONDA glom, HONDA MSX125, HONDA APE, HONDA NS-1, KAWASAKI KSR, Others , HONDA DAX
It was a blast.
It looked great, but it was a blast. w View detail
Design is good, but,
The design and overall construction is good, but I think the quality is commensurate with the price. View detail
It's dark
Halogen is better for this, it is darker. View detail
Fits: HONDA PCX125 (JF28) *Not tested for minor changes since 2012., HONDA PCX125 (JF28) *Not tested for minor changes since 2012.
If only it were 2 cm shorter.
For my approximately 4.0cm DownPCX, this Short Stand is still a bit long
At least specify the total length and dimensions in the product description.
The accuracy of the product is not very high, so there is some rattling.
I think it looks good.
View detail
Fits: SUZUKI WOLF250 [Wolf] VJ21A, SUZUKI TL1000R VT52A, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI RG250γ GJ21A, SUZUKI RG250γ GJ21A, SUZUKI RF600R, SUZUKI Katana 600, SUZUKI Katana 600, SUZUKI INAZUMA400 [INAZUMA] GK7BA, SUZUKI INAZUMA1200 [INAZUMA] GV76A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX-R750W, SUZUKI GSX-R750W, SUZUKI GSX-R750SP, SUZUKI GSX-R750R
Price suitable
I put it in Rear.
It doesn't stop at a reasonable price.
It did not lock even when I stepped on the Brake quite hard.
Control was a good feeling, so I am satisfied with it.
View detail
Fits: HUSABERG , HUSQVARNA , KTM , TRIKE , ATV_BUGGY , TRIUMPH , HONDA MONKEY, Others , SUZUKI HUSTLER, SUZUKI DJEBEL, SUZUKI RMX250, SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KDX220, KAWASAKI 250TR, HONDA XLR250, KAWASAKI KSR110, HONDA XL230, HONDA XR400 Motard, HONDA CRM250R
Price is right.
Cheap! Price is right, installed on klx230sm. View detail
Fits: その他 12V car
cheap construction
Very cheaply constructed.
No light when inserted deeply, light when inserted lightly, but wobbly.
Obvious defective product or design error
View detail
Small Mirror that suits the smallest body
Installed on MONKEY125.
I have a low Handlebar and was looking for a Mirror that could be placed low.
I thought about bar end mirrors, but I felt safer to put them in the normal mounting position.
I use it with OffsetHolder and the visibility is not bad.
View detail
Fits: HUSABERG , HUSQVARNA , KTM , TRIKE , ATV_BUGGY , TRIUMPH , HONDA MONKEY, Others , SUZUKI HUSTLER, SUZUKI DJEBEL, SUZUKI RMX250, SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KDX220, KAWASAKI 250TR, HONDA XLR250, KAWASAKI KSR110, HONDA XL230, HONDA XR400 Motard, HONDA CRM250R
Good as a dress-up. The price is reasonable and conscientious.
The price is right and the dress-up is good. View detail
Fits: HONDA GROM [Grom] (MSX125)
Looks better than Slider
This is one of the Parts that I purchased to make the Grom BlackGold.
However, after I bought it, I realized that I had to remove the Tire in order to install it.
I had neither the equipment nor the experience to remove a tire from a motorcycle, so Jack from "for Vehicle" and I managed to install it by brute force.
Equipment and tools are Large things.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, HONDA CB223S, HONDA CB400SF, HONDA GB250 CLUBMAN, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1100/ZX-11, KAWASAKI NINJA400R (-2013), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R400, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA R1-Z
Purchased as a trial for Handlebar replacement
I bought it to install on my Triumph STREET TRIPLE, which I always use for touring and city riding.
To be honest, I like the position of the OEM Handlebar so much that I am currently looking for a replacement, but I am having a hard time finding one that fits the bill. This Handlebar is also quite different from the OEM position, and I'm not sure if I can use it.
I'm sorry to hear that, but I'm going to be a fertilizer for Chest.
However, it may not be very useful as an impresario since the price is so low that I felt like I was just trying it out for no good reason.
View detail
Fits: HONDA MCX50, SUZUKI Sepia ZZ CA1HC, SUZUKI Address [Address] Tune CA1FB, KAWASAKI KX80 KX080V, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KSR-2 MX080B, KAWASAKI KSR-1 MX050B, KAWASAKI KS-2 KMX80, KAWASAKI KS-1 KMX50, KAWASAKI KDX125SR DX125A, KAWASAKI KD80, SUZUKI Shoot CA14B 85, SUZUKI sepia] rs ca1hb 93-95, SUZUKI MODE [Mode] GT CA18A 87, SUZUKI Mini M50 90-95, SUZUKI Mini M50 86-89, SUZUKI HI UP [HI UP] R CA1DB 88, SUZUKI GAG [GAG] LA41A 86, SUZUKI CP50 85
Cospa best
Scooter parts must be inexpensive.
I am concerned about the durability as it has not been run yet.
View detail
Fits: HONDA CB-1, HONDA CB250RS, HONDA CB250RSZ, HONDA CBX250RS, HONDA CL400, HONDA GB250 Clubman, HONDA superhawk, HONDA Super Hawk 3, HONDA Zervis., HONDA Hawk 2 CB400T, HONDA Hawk 3 CB400T, HONDA Hawk CB250T, KAWASAKI GPZ250R, KAWASAKI GPZ400/F/F2, KAWASAKI KR250/S, KAWASAKI Z250FS, KAWASAKI Z250FT, KAWASAKI Z400GP, SUZUKI GF250, SUZUKI GF250S
Headlight Bracket For 31mm
About quality and texture be neatly finished in black About the feeling of use I decided to compromise a little and use it, but it doesn't fit Products to buy together Winker bracket, bolt, nut, Difficulty of installation It's hard. It's not for APE100, so I installed it differently from the description Cost performance and comparison with other products I recommend other products even if they are expensive. It's not easy to install because it's a general purpose product. About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought this product because I wanted to finish it in black, but it doesn't fit well with ape100 because it's general purpose. I just read what was written in the review. So, contrary to the explanation, I installed it in reverse Bracket As the width narrows, the headlights spread out little by little, so I'm going to compromise moderately There was no Winker bracket, so I installed it as a standard Winker and it became Mickey Mouse View detail