Reviews
Anyhow cool!
Since Jacket's Fastener scratches Tank, I think it is an essential Items if you want to continue riding beautifully
Compared with BugStar, here is Design is Simple and cool
The price is also about three times w
Easy to install
Just paste it with Double-sided Tape
It seems that the accuracy is also good, it could be attached without twisting or distorting strangely
I guard the fairly wide area up and down, so I think that scratches will not enter Tank even if you lower your upper body
Rather, this Tank protector is smart so I'm worried about scratching this w
View detail
A little after
Privately, I wish a little more length
I thought, who was up to Seat
Was it good? The making of the whole is beautiful
I am satisfied.
Four stars a little longer ...
I installed it in the 2012 year ceremony.
View detail
To prevent scratches
I bought it for scratch prevention
I felt it was a bit unsatisfactory
I pasted Pad
The cutting angle is not good, but the product quality is high
I think that there is no loss because cheap weave is also cheap.
View detail
CW Tank Protector, it is 100% fit to my bike. I have the same item on my last bike (GSX750R), It look very nice and I'll use it again for my next bike.
CW Tank Protector, it is 100% fit to my bike. I have the same item on my last bike (GSX750R), It look very nice and I'll use it again for my next bike. View detail
This product calm from the reddish thing till then with change of the exterior was used.It is easy, it degreases and only sticks attachment with double-stick tape.It is better, if a price is cheap although appearance is also very good smartly.
This product calm from the reddish thing till then with change of the exterior was used.It is easy, it degreases and only sticks attachment with double-stick tape.It is better, if a price is cheap although
appearance is also very good smartly.
View detail
Since it was set to the Level which is not if the crack of the Tank was patience, it purchases. Although a Carbon raw material is seldom to its liking, since a Carbon is seldom conspicuous even if a crack enters, it is good.The portion which is equiva
Since it was set to the Level which is not if the crack of the Tank was patience, it purchases.
Although a Carbon raw material is seldom to its liking, since a Carbon is seldom conspicuous even if a crack enters, it is good.The portion which is equivalent to the waist at the time of
management is also covered.
Since there is no prejudice in particular in texture, the short plain weave of a delivery date is chosen.
About ten about 1x2-cm double-stick tape is attached, then it fixes.Or [ that it is easy to do the direction which removed the
sheet and was constructed ].
At some times of about [ with which it equipped ], although it floats, if it is pressing down a number of times on the 1st, it will be an Exactly.
However, it is just going to be worrisome that dust accumulates in a crevice.After
, by the goods picture, although it is unclear, the character of "CW" is [
central neighborhood ] contained by Emboss.
Since he did not want to take out a Manufacturer-logo thing to a visible place if possible individually, it hid by the Tank pad.Since a Tank is large and
SS tends to put in a crack, I think whether goods of this sort are indispensable.
View detail
Since it was before used by 07 GSX1300R HAYABUSA, it chooses here this time also. although I was allowed to stick in front of the Motorcycle store at the time of new car purchase -- -- only a few has gone wrong. form is not exactly sai
Since it was before used by 07 GSX1300R HAYABUSA, it chooses here this time also.
although I was allowed to stick in front of the Motorcycle store at the time of
new car purchase --
-- only a few has gone wrong.
form is not exactly said to a Tank and became a form where it had floated a little.
the case where it sticks according to the Line of a fill opening although it might be individual specificity --
-- an end appears and goes up a little.
differing from the time of the GSX1300R HAYABUSA -- R1000 -- Tank form -- since it is delicately complicated --
-- I think whether it became such.
Although carried out by improving position doubling, when all the ends of the Tank side were stuck and it was a method of
, it shifted for a while, and pressure sensitive adhesive tape got twisted, a few was protruded, and it kept.
-- the direction somehow stuck if possible inside when sticking on an end or an edge -- merit that's right.
It is somewhat hotter evaluation from having also raised the price, and having expected and purchased in the elegance only for +
that it is a place difficult as products, although he understands.
If only the function surface is said, it will be as expected and will be satisfied.
View detail
It is the true elegance only for a vehicle type. If it degreases firmly, it does not separate probably and can stick exactly without a crevice. In a direction to purchase with the new car and not give a crack to if possible, it is very a Recommendat
It is the true elegance only for a vehicle type.
If it degreases firmly, it does not separate probably and can stick exactly without a crevice.
In a direction to purchase with the new car and not give a crack to if possible, it is very a Recommendation.
View detail
Since it is exclusive use, it attaches and is easy. appearance is good. Probably I think that gloss is lost with time. It is merely although what is necessary is just cheap to a slight degree...
Since it is exclusive use, it attaches and is easy.
appearance is good.
Probably I think that gloss is lost with time.
It is merely although what is necessary is just cheap to a slight degree...
View detail
Since the expensive Carbon had yearning, if it was this amount of money, he thought good kana and bought it. attachment is simply attached with double-stick tape, and can also be removed! It is wide range, and a Tank can be protected from a crac
Since the expensive Carbon had yearning, if it was this amount of money, he thought good kana and bought it.
attachment is simply attached with double-stick tape, and can also be removed!
It is wide range, and a Tank can be protected from a crack and also the opinion of a Carbon design is loud! Since it had ridden on NK until now [
], were not caring about the Tank pad to there, but.
Since it changes to SS and was easy to become Front load, the crack of the Tank was worrisome.
Before
goods arrived, when saying the peak, the crack was contained in the Tank for a while.
Slight earliness will be [ anything ] good if it attaches.
View detail
Simultaneous wearing was carried out at the time of delivery of cars. Also when you push and walk besides the time of entrainment, it is protecting from the crack.
Simultaneous wearing was carried out at the time of delivery of cars.
Also when you push and walk besides the time of
entrainment, it is protecting from the crack.
View detail
Tank-protector structure is solid. To some extent, since it can bend, a Tank is fitted with an Exactly. Although attachment is attachment with the powerful double-stick tape of familiarity, since the Tank protector of Ninja1000 is the for
Tank-protector structure is solid.
To some extent, since it can bend, a Tank is fitted with an Exactly.
Although
attachment is attachment with the powerful double-stick tape of familiarity, since the Tank protector of Ninja1000 is the form which the end on either side involved in, attaching just is serious.
I was allowed to consider it as four stars by
.
View detail
Although the small Tank protector of the cheap Seal type was stuck before, it changed to the Protector of the Carbon newly. Since wearing is only the easy work stuck on a Tape, it is satisfactory. I think that gloss is very beautiful and also it is
Although the small Tank protector of the cheap Seal type was stuck before, it changed to the Protector of the Carbon newly.
Since
wearing is only the easy work stuck on a Tape, it is satisfactory.
I think that gloss is very beautiful and also it is good that a Pat side is also comparatively large as for
appearance.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It got damaged and appearance not only changes, but purchased for prevention. Since attachment is also double-stick tape, it is easy. It will shift, if a Balance is not maintained.
It got damaged and appearance not only changes, but purchased for prevention. Since attachment is also double-stick tape, it is easy. It will shift, if a Balance is not maintained. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
He bought it for the purpose of [ of the Tank ] crack prevention. Although it wavered, it used as this large product of crack prevention range the Pat of the Rubber system ?, and which to make it at the beginning of . I think that a result of th
He bought it for the purpose of [ of the Tank ] crack prevention.
Although it wavered, it used as this large product of
crack prevention range the Pat of the Rubber system ?, and which to make it at the beginning of
.
I think that a result of the
products is good.
although hit against the Tank, without attaching
double-stick tape, there is also no distortion --
-- exactly -- Fit! It can equip without doing anything especially.
However, we recommend you the purchase of double-stick tape previously when equipping.
A number is insufficient although there is double-stick tape of
attachment.
I would like to attach the
place only to a place firmly.
Since it is adhesion of
curve side, the double-stick tape of thin width is recommended.
View detail
Although the Pad of the Seal was stuck, it is almost ineffective and changed into the Protector this time. Although attachment is also comparatively easy, it is dramatically easier at the time of this attachment to make attachment of a Masking tape p
Although the Pad of the Seal was stuck, it is almost ineffective and changed into the Protector this time.
Although
attachment is also comparatively easy, it is dramatically easier at the time of this attachment to make attachment of a Masking tape prudent by attachment of a trial.
However, although attached double-stick tape is attached, if I also have spare quantity attached, sense of security is different.
View detail
It purchased to crack prevention of the Tank. wearing is only stuck by attached both sides. First, attached both sides are suitably cut at the rear face, and are stuck on it. Although a position is checked according to a Tank next,
It purchased to crack prevention of the Tank.
wearing is only stuck by attached both sides.
First, attached both sides are suitably cut at the rear face, and are stuck on it.
Although a position is checked according to a Tank next, the Tank protector and the Tank were worn at this time, and a crack enters (>_
View detail
[a Webike Monitor] -- although I will think that it can stick satisfactorily if it is positioning with the kitchen when sticking -- -- I stuck accessories independently, and prepared and faced the double-stick tape like repair. It
[a Webike Monitor] -- although I will think that it can stick satisfactorily if it is positioning with the kitchen when
sticking --
-- I stuck accessories independently, and prepared and faced the double-stick tape like repair.
It was able to stick just at the 2nd times.
Although it was the time of sticking, it was thought that it was easy to do the way which sheet outside carried out.As told about the direction besides
, it is worrisome that there was distortion of
some, but since the Tank of the
latest SS has many 3D curves, I regard it also as the unavoidable thing kana ?.although it does not go to a tank line exactly
so that it may stick fast --
-- it fits satisfactorily.It became an Accent with the Of course large
protection area and sufficient [ crack prevention of a Tank ] also in
looks.
View detail
Wearing.The Design of a Carbon tone looks beautiful in a Tank, and its Parenthesis is good.Although a crevice is vacant for attachment with double-stick tape, I think that form is good. -- above all, for the attack of the Jumper Fastener to a Tank
Wearing.The Design of a Carbon tone looks beautiful in a Tank, and its Parenthesis is good.Although a crevice is vacant for attachment with
double-stick tape, I think that form is good.
-- above all, for the attack of the Jumper Fastener to a Tank, etc., only the stuck area can be prevented, and I come out and think that this more and more product with a big area is not bad.
View detail
In case of a small Tank pad, because the portion which carries out a Knee grip, and the Edge of the Tank rear move the body, it will be stained with a crack. Since the wide range can be covered in case of this product, such uneasiness does not exist
In case of a small Tank pad, because the portion which carries out a Knee grip, and the Edge of the Tank rear move the body, it will be stained with a crack.
Since the wide range can be covered in case of this product, such uneasiness does not exist.
Some
attachment can be simply performed, if it does as a description although a hang enters.
It seems that a Cover however covers into a character in case of the specification by which the Logo of KAWASAKI went into the Tank side since the area to cover is large.
Since the Logo of a Tank is only Ninja, my ZX of
North America specification has no problem.
View detail