Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Tank Cover (GSX1300R HAYABUSAI type) Twill Weave Carbon
The product is aesthetically pleasing as a twill weave carbon and is well finished. The area of the cover is larger than that of a general stick-on cover, and the appearance of the custom parts is eye-catching, and the practicality of the cover is also reassuring, as it frees the user from the worry of damaging the tank with Belt Bracket etc. On the other hand
Urethane for surface protection [Color] The drawback is that Clear painting must be done by itself. A small amount of liquid Sauce still occurred.
View detail
CLEVERWOLF Tank protector 2019mod. 2BL-SC54
2019 2BL-SC54 I installed it on a CB1300SB and it was Exactly in Tank shape. View detail
The construction is good, but the thickness of Carbon is too thin and it is soft.
It is well made! But it's a bit thin and not thick enough. It is soft. I'm satisfied with the manufacturing, but the texture makes it seem a little expensive.
However, the carbon parts and fittings of LaborWolf are always good, such as Fenders and Covers. It's just expensive.
But it is definitely better than Magny-Cours RACING. The other one is just a poorly made and expensive carbon. If you look at it through the light from the back, you can see that it's not very smooth, most of the parts can't be attached, the fitting is bad, sometimes damaged parts come, and the price is too high.
In this respect, KuLaborWolf is only expensive and well made!
My personal opinion is that both of them have bought a lot of Parts, so I would like to refer to them.
View detail
Was good (´ω`)
At first I wasn't sure if I could get it right, but once I tried it, I had no problem at all and it went on easily. (Lol) The quality was better than I expected. View detail
Some gaps are unfortunate.
I purchased this product to protect Tank.
The product's appearance and protective performance are very good.
Installation is also easy for anyone following the Instruction Manual.
However, when I installed it, there is a slight gap between the two, and I am concerned that water may enter through the gap when washing the car or when it rains.
Other than that, I have no complaints.
View detail
It purchases as the appearance and the object for crack prevention of a tank. however -- if the middle neighborhood pushes -- poco -- it seems that the form of some tank changes since poco is carried out It is the shin without becoming, if it beco
It purchases as the appearance and the object for crack prevention of a tank.
however -- if the middle neighborhood pushes -- poco -- it seems that the form of some tank changes since poco is carried out
It is the shin without becoming, if it becomes difficult to shift in front by it.
Although it is in double-stick tape, if PITATSU is not decided on by one shot, it will shift and will attach attachment.
moreover, tricot -- in color, since a sticker portion started, he cut and stuck the sticker on the same form.
View detail
It also prevents scratches and makes the tank area parenthesis better!
I just use double-sided tape to attach it, but it's difficult to decide on one shot because the tape that comes with it is too strong.
Is it here? And even if you install it "Oh! I got a little gap!" But it sticks from the edge and is almost impossible to reapply.
If you can pay attention to that and stick it on nicely, you'll have a cool Tank area!
I bought the twill weave, and I am very satisfied with its luster.
By the way, I'm attaching it together with the OEMTank Pad.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Practicality and appearance Up!
I used Tank Pad with Logo before, but I bought it so that Wound would not be attached to Tank by the interference of the hem of Fastener and the interference of the part which opened the lower part of Double zipper when I wore a long Jacket in winter. I was able to put it on without feeling uncomfortable because the basic shape is the same as the Chinese Cowl. I'm very happy with it, and I hope it's a little cheaper for my wallet; View detail
It is Exactly!
Until the product was installed, I was honestly anxious. When I installed the product, it was exactly well though it was for ZrX 1200 DEG.
I remembered and added only with the enclosed Double-sided Tape, but I do not have any anxiety.
If possible, it will be saved if it is a bit cheaper, but it is difficult (^_-) - ☆
View detail
Appearance
Also looks like Material : Carbon Style is also good, is Double - sided Tape also comes with a 3M thing easy to attach easily.
I think that it is better to put a Tape on the upper side as much as possible because some clearance is formed at the top.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
There is a sense of stability.
Because the area for Tank is wide "Appearance" Quite to purchase
Although we could not step on, as a preventive measure of Wound.
Since the product traces the peculiar Line of Tank well
There was nothing to worry about with the installation point.
Stability after installation is perfect as well.
However, if there is no Logo mark in the product center
I feel better..
View detail
Reliable Manufacturer
Installation and handling I think the Instruction Manual is kind, easy to understand, reliable Manufacturer. Although the product feels expensive, I will endure it because it is Just fit. Large changeable satisfaction for 5000 yen fee. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Installation is a little Large
Design Texture is Parenthesis nice. Twill Weave Carbon There is a three-dimensional luxury. I sprayed a slightly diluted neutral detergent onto the Double-sided Tape pasted on the Reverse side. So you can adjust the position so I fixed it with Masking tape at the first place. I was stuck on the next day. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I wonder if I should attach it from ahead of time - - -
I used Small Pacific Tank Pad, but when I made Jacket leather I rubbed it in Tank and it was blacked out so I did it.
Because the installation is done only with double-sided tape, so easy. Position only carefully.
View detail
Anyhow cool!
Since Jacket's Fastener scratches Tank, I think it is an essential Items if you want to continue riding beautifully
Compared with BugStar, here is Design is Simple and cool
The price is also about three times w
Easy to install
Just paste it with Double-sided Tape
It seems that the accuracy is also good, it could be attached without twisting or distorting strangely
I guard the fairly wide area up and down, so I think that scratches will not enter Tank even if you lower your upper body
Rather, this Tank protector is smart so I'm worried about scratching this w
View detail
A little after
Privately, I wish a little more length
I thought, who was up to Seat
Was it good? The making of the whole is beautiful
I am satisfied.
Four stars a little longer ...
I installed it in the 2012 year ceremony.
View detail
To prevent scratches
I bought it for scratch prevention
I felt it was a bit unsatisfactory
I pasted Pad
The cutting angle is not good, but the product quality is high
I think that there is no loss because cheap weave is also cheap.
View detail
CW Tank Protector, it is 100% fit to my bike. I have the same item on my last bike (GSX750R), It look very nice and I'll use it again for my next bike.
CW Tank Protector, it is 100% fit to my bike. I have the same item on my last bike (GSX750R), It look very nice and I'll use it again for my next bike. View detail
This product calm from the reddish thing till then with change of the exterior was used.It is easy, it degreases and only sticks attachment with double-stick tape.It is better, if a price is cheap although appearance is also very good smartly.
This product calm from the reddish thing till then with change of the exterior was used.It is easy, it degreases and only sticks attachment with double-stick tape.It is better, if a price is cheap although
appearance is also very good smartly.
View detail
Since it was set to the Level which is not if the crack of the Tank was patience, it purchases. Although a Carbon raw material is seldom to its liking, since a Carbon is seldom conspicuous even if a crack enters, it is good.The portion which is equiva
Since it was set to the Level which is not if the crack of the Tank was patience, it purchases.
Although a Carbon raw material is seldom to its liking, since a Carbon is seldom conspicuous even if a crack enters, it is good.The portion which is equivalent to the waist at the time of
management is also covered.
Since there is no prejudice in particular in texture, the short plain weave of a delivery date is chosen.
About ten about 1x2-cm double-stick tape is attached, then it fixes.Or [ that it is easy to do the direction which removed the
sheet and was constructed ].
At some times of about [ with which it equipped ], although it floats, if it is pressing down a number of times on the 1st, it will be an Exactly.
However, it is just going to be worrisome that dust accumulates in a crevice.After
, by the goods picture, although it is unclear, the character of "CW" is [
central neighborhood ] contained by Emboss.
Since he did not want to take out a Manufacturer-logo thing to a visible place if possible individually, it hid by the Tank pad.Since a Tank is large and
SS tends to put in a crack, I think whether goods of this sort are indispensable.
View detail