Reviews
Handlebar replacement at the same time
We replaced them together when we replaced the handlebar.
It's comfortable to hold.
Domino is my personal favorite Brand and I will continue to use it!
View detail
Used for Motorcycle
The diameter of the handlebar for Motorcycle is the same as for Motorcycle.
Only the for Left Side was installed on the bike.
The domino Grip is brilliant on My bicycle.
View detail
replaced it with a Domino grip
The original throttle grip I was using was old, so I replaced it with a Domino grip because I remembered using it on my old RS125. It is unavoidable that there is some space left as it is shared, but there is no major problem with the product itself. If you want the perfect grip We recommend that you buy a genuine grip. View detail
Fits: HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA ELSINORE 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175, HONDA AX-1, Others , YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Numbness in the fingertips
It is a former mechanic, and I installed it carefully while considering the position of the Waffle on the back side. However, I noticed that the thumb of the left hand had become numb by the vibration when I ran 80km on the mountain road by touring (was there also some cold?). I'm not sure if it was cold or not.
Even though it is an off-road motorcycle, it is relatively new (WR250R/2015) I've never had such a problem with OEM grips before. If you look closely, you'll see that the OEM grip has a waffle finish up to the thumb area, but the domino grip is made similarly but without the waffle finish. The grip is a little thicker than the OEM grip.
And I felt a bit of numbness in the fingertips of my Right hand. (5BE-26240-00) I think that the grid size of Waffle is Smaller in the case of the "Mere Old Man", so that the fingertips are less likely to become numb.
P.S.
After that, I still don't get numb with OEMGrip anymore.
View detail
Fits: HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA ELSINORE 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175, HONDA AX-1, Others , YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Numbness in the fingertips
It is ex-Mechanic, and I installed it carefully while considering the Waffle position of the back side.
But after 80 miles of touring, I noticed that my left thumb had gone numb from the vibration.
Even though it is an off-road motorcycle, it is relatively new (2015) This has never been the case with OEM grips.
If you look closely, you'll see that the OEMGrip has a Waffle process that extends all the way to the thumb area, but
The grip of this domino is made close, but the Waffle processing does not extend that far.
Also, the grip felt slightly thicker than OEM.
And I felt a bit of numbness in the fingertips of my Right hand.
OEM (5BE-26240-00) I think that the grid size of Waffle is Smaller in the case of the "Mere Old Man", so that the fingertips are less likely to become numb.
View detail
For Dress-up
[How is it used?
I used it for one month.
Was the installation difficult?
It's very simple
How was your experience with it?
My impression is that it is not that different from OEM.
View detail
buying the same item multiple times, each one being a different color (colour)
This is a repeat purchase. It was RED until now, so I think it will be PINK this time. It is a feeling of use of RED until now, but the character of domino is collapsing by the time one year has passed, and the surface is becoming sticky now that three years have passed, and Rubber seems to be changing. However, the appearance is cool, the price is cheap, and it is a consumable, so it is Repeat. View detail
Parenthesis good for appearance.
I couldn't resist an impulse buy with Universal.
I installed it on my Z125pro.
The first step is to install it.
It seemed to be about 5mm longer on the Z125qro with the STD Handlebar.
I think Clutch Side is fine, but
It's less than 10mm too much due to the non-slip on the Axel side.
Cut the end side of the Grip, but there seems to be no problem. (´Д` )
So far, I've been able to secure it without slipping without using a Grip bond.
It is a feeling of use, but it is the impression that it is thinner than NORMAL.
It doesn't slip, but vibrations are more easily transmitted than before.
The color is beautiful to look at, but
Since Rubber itself is harder than NORMAL, I think that those who want to suppress the vibration should choose another one.
View detail
atmosphere (e.g. of a place)
Honestly, I don't mind if it's not there, but I bought it to enjoy the atmosphere.
I roll it up when I carry it in the Transporter and smile when I drop it off.
Texture
It is likely to be a Copy product in Pe LePera.
The edges will fray slightly.
It's just a piece of synthetic fabric, and I'm satisfied with it, even though it's just to fit the Grip.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
You should look at the size before you buy
I bought it because it can be installed on W800, but it is true that it can be installed Should
I tried it on, but I still didn't like it and eventually took it off
View detail
Fits: KAWASAKI GPZ1100, HONDA CB1000 SF, HONDA CB1000R, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400FOUR(Air cooled), HONDA CB400FOUR (water-cooled), HONDA CB400SB, HONDA CB400SF, HONDA CB400SS, HONDA CB750F, HONDA CBR1000 F, HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250 R MC17, HONDA CBR250 R MC19, HONDA CBR250R (MC41), HONDA CBR250RR, HONDA CBR400R(NC23)
For those who like
Does it make Throttle easier? I bought it to try the Grip, which is a bit thicker than the OEM As a result, it didn't suit our needs A few millimeters of change can make a difference - I'm back on OEMGrip View detail
I need more durability
It's better than RACING, but DominoGrip will be reduced and dominoLogo's The part will come off
I'm going to try Touring type next
View detail
Maybe for normal use?
I'll use and say that it's close to Honda OEM, but I'm still going to use Honda OEM as I thought it would be better to buy it quietly
I bought it to try it out, but it's not very grippy "Compared to Honda OEM
But the price is low, so I think it's a good cosmetic product
View detail
If the place of length adjustment, Cut has been done All Star 5
Length with STD Handlebar does not match delicately.
Because it is a little long, when cutting the length adjustment cut it will be the same length as Normal grip. Axel side can see the White cousin at the base of Axel throttle. Design The best.
View detail
Fits: BMW F650CS, HUSQVARNA SM450R, HUSQVARNA TE250, HUSQVARNA WR250, HONDA SL230, HONDA MTX250, HONDA ELSINORE 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175, HONDA AX-1, KTM 990 ADVENTURE, KTM KTM 690 ENDURO, KTM KTM 690 SMC, KTM 400EXC, KTM 350EXC-F
DSHGrip
The Grip end has broken
I was planning to exchange if there was a problem.
Price and Collar, like it, buy it!
Is it thicker than OEM?
When the Right hand operates Throttle for 30 minutes
I am very tired!
View detail
It is smart!
Grip which is decorated a lot in motorcycle store. Normal tic black of the classic is also good, but gradually it became wanting to assert, starting to think about colors and shapes, I met Domino. There are strange things in colors and shapes, so I thought about that, but I felt a bit off. Domino is a so-called Honda genuine or similar shape and pattern as doctor grip, but you can choose the color. This time I bought two of blue and red. Blue adds to CBR 250 FOUR. Red is attached to VT 250 FG. Different colors, sticking to the same shape. However, the domino grip has a total length of 126 mm, which is slightly longer than the usual 120 mm grip. If you cut the inner color part, there is 3 mm shortening, but I do not want to cut off the color part. Originally VT 250 FG is 125 mm right grip, so here is just perfect. CBR 250 FOUR is not fitted unless a spacer is added and added to the bar end. But what do you do?. Domino is good because I want to do it well and have 2 items in common by having the same shape and color difference. I hope it will be a bit cheaper. View detail
nothing special
I tried to make it the same color system as Body, Exhaust System. Although I was going to exchange for myself, the End Screw was hard and I did not turn around with Impact, so I asked KCH who is always indebted. View detail
Dress-up effect is outstanding!
I was using PRO Rob Rib, but because it is getting down, I purchased it to try another Grip.
I feel a grasp feeling thin and firmly grips. It looks very well and has a high-class feeling, there is also a Dress-up effect.
However, there was also the purpose to alleviate the oscillation peculiar to R3, but as I wrote above, it was too thin to absorb it so I felt as much as OEMGrip.
Although it can not be Recommendation for people who choose for vibration reduction purpose, it is Recommendation if it is for Dress-up purpose.
Pictures from the top Domino - Pro grip - It is OEM..
View detail
It may be disappointing
Design is good, but I feel that Throttle is harder to rotate than I imagined.
Is it a matter of Material? It feels too soft. Even if I release Grip, I feel nervous and stick to it.
However, as it is just wearing it, it may be just feeling it with a sense of incompatibility.
View detail
Fits: HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA ELSINORE 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175, HONDA AX-1, Others , YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Although I purchased CROSS processing, I like it!
I looked at Catalog and purchased CROSS processing favorably.
In fact, when installing, certainly CROSS processing on the fingertip
The part fits the fingertip, but I feel a sense of incongruity unlike my expectation.
View detail