Reviews
It's thin in the grip
GSX1300R HAYABUSA 10 year old North America
Attached to NORMALSeparate Handlebars
As for the feeling of use, the grip is thin because it is Race type, and there is a sense of unity with the Handlebar
However, if you ride it for a long time, your palm gets painful In my case, I felt the vibration strongly because my hand is thick and Large
White black was my choice of color, but if Gloves is black, the color will transfer to It makes you feel black and dirty If you're looking for a clean white color, I wouldn't recommend it
They are a top-notch manufacturer, Domino, and the build quality is excellent The Grip rating is divided according to rider's preference, so I personally think it is more thicker and less vibration If you prefer a gel or a type with a grip, you should choose this one
View detail
Excellent Fit feeling
I used it on Yamaha's YZF-R15
This is a replacement for the OEM Product Grip
As for the installation, I cut the extra part because it was too long as it was
With the OEM Product, it was hard and slippery without much grip That is no longer the case at all
I'm glad I put it on because it feels like it absorbs into my hand and fits
However, as a Demerit, there are two issues:stains are noticeable and durability is an issue
In terms of stains, you can choose the black one, but I chose the blue one, so I had to choose the blue one The Gloves are dirty, rain, etc
Material:Because of the rubber, it takes a lot of time to clean the dirt off, so you have to take that into account It is not
In addition, the letters domino have been scraped off in the grip, and it's a bit hard to tell the durability of the car after a few thousand kilometers By the way, a part of the logo area has come off
I don't care about the part of Logo so much, so I can't help but think about it I didn't, but I wouldn't recommend it to anyone who wants to use it for a long time to keep it clean
I've written more about Demerit, but I've written more about the Grip improvement, the texture, and the glamour of the look I am very happy with it and I like it so much that I would buy this Grip again
View detail
Gray is a failure
I bought the gray color because I wanted to calm down around the Handlebar, but the dirt stands out Next time I'll buy a darker color, but it's not much different from other Grip models Dress-up parts, right? View detail
Note the durability
I don't know if it's consumable, but after riding it a few times, the logo part is almost turned over I was
I'm just happy with Design and Grip!
View detail
I like it.
It looks good in Parenthesis The Grip is also very nice and decent after using it It would be great if there was a Grip end with a hole in this design View detail
Fits: KAWASAKI GPZ1100, HONDA CB1000 SF, HONDA CB1000R, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400FOUR(Air cooled), HONDA CB400FOUR (water-cooled), HONDA CB400SB, HONDA CB400SF, HONDA CB400SS, HONDA CB750F, HONDA CBR1000 F, HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250 R MC17, HONDA CBR250 R MC19, HONDA CBR250R (MC41), HONDA CBR250RR, HONDA CBR400R(NC23)
For those who like
Does it make Throttle easier? I bought it to try the Grip, which is a bit thicker than the OEM As a result, it didn't suit our needs A few millimeters of change can make a difference - I'm back on OEMGrip View detail
I need more durability
It's better than RACING, but DominoGrip will be reduced and dominoLogo's The part will come off
I'm going to try Touring type next
View detail
The ease of grip is outclassing
I bought Black×Red and replaced it with OEMGrip and drove about 1,000km I did
The Red part is less, but from someone who doesn't ride a motorcycle Have you changed Grip? It's been a good Accent to be asked
Not too thin and not too thick, just a perfect grip
Half waffle and good finger contact
The warts in the palm area are also pleasantly hard
As for the Grip, I think it's 100 points, but my hands went numb quicker than the OEM and I did
Physically Increased numbness by 30% It's about the same
I like the slightly firmer, direct feel of the grip
That said, it may not have much vibration absorption
as of now My hand doesn't feel numb at all! If you are a person who is not a fan of the
If you're having trouble with numb hands "Hmmm.. It's like thinking about it
You'll definitely get numb, but it's the best grip you'll ever have until you start to get numb
View detail
The last one is getting tighter and tighter
I bought it for Replacement because the old one got hard After the replacement, it felt like it sucked in my hand and driving became easy I want to use it to see how much durability it has afterwards View detail
DOMINO makes me confident when catching it!
Previously, my motorcycle used a DOMINO grip that was attached from the factory. And it's time to change the grip. DOMINO is the only brand grip I choose to install on my motorcycle. I think when I catch it I feel very tough. Makes me confident that It will not easily slip out of my hand. View detail
good for control the accelerator
I'm confident in the Domino brand. I can feel that it is very sticky. It has a firm fit. It can control the accelerator And can control motorcycle direction very well View detail
Great!
Slightly thicker and softer, so it's just right for groms that vibrate a lot, like the OEMGrip, but stiffer The size is Exactly and the installation is thin It's smooth and easy with neutral detergent, no bond or wire, and doesn't shift at all It looks sibling Perfect! View detail
easy to grasp
It's easy to grip It looks good; I thought it was easier to grip than the OEM However, there are some places that need to be shaved off, so I had it put on at the supply store So I had it put on at the supply store View detail
It's comfortable to use
I like this product so much that I have used it on two motorcycles, one past and one present
If you don't cut the root of the InnerRubber on the Axel side It interferes with the Switch Box and prevents Axel from returning
But I'm very satisfied with it because it's easy to cut with Cutter, etc. and the cross-section can be finished nicely It is recommended
The grip and grip feeling and the hardness are also satisfactory, but the surface rubber loss is a little early is.........
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI ER-6n, KAWASAKI EX-4, KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ400, KAWASAKI GPZ750, KAWASAKI GPZ900R NINJA, KAWASAKI NINJA400R , KAWASAKI NINJA650 R, KAWASAKI W400, KAWASAKI W800, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 KZ, KAWASAKI Z1000 Air cooling, KAWASAKI Z2, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI ZEPHYR1100
fast delivery and good
The delivery is fast and the product is good. The quality is better than I thought, but I haven't tried installing it yet, but if you're ordering it, it comes only for both sides of the grip rubber. Oh, and it comes with a sticker when ordering, so be careful about the grip size and I bought it to install on the cb400sf Delivery is fast and goods are good too I think it's better quality than I thought, but I do not try to fit it yet. And it looks like you will buy it with a good view of bar end mounting and non-mounting. Oh, and the sticker when you order it, so it is good, please be careful about the size of the grip and I bought it for the cb400sf. translated by Google Translator View detail
Repeat Buy
In the Street Specification that we put on the Ninja 250 last time, our Grip I liked it so much that I installed Race Specification this time
Stiffer than Street Specification, which makes it easier to adjust the Axel opening angle It will be
The aggressive nature of the bumps on the surface makes the gloves sore quickly in Race The downside of Specification?
I'm glad I replaced it because I personally felt more comfortable with the Race type
View detail
I'm glad I changed
Since this is a replacement for the OEMGrip, the first thing I felt was that it was thin and hard
But it's Street Specification, so it's a Race Specification and It's a little soft in comparison
Thanks to the narrower diameter, it is easier to grip the Grip and adjust the position of the Axel
The vibration is worse than the OEM, but not so bad that I was nervous
View detail
Maybe for normal use?
I'll use and say that it's close to Honda OEM, but I'm still going to use Honda OEM as I thought it would be better to buy it quietly
I bought it to try it out, but it's not very grippy "Compared to Honda OEM
But the price is low, so I think it's a good cosmetic product
View detail
Fits: KAWASAKI GPZ1100, HONDA CB1000 SF, HONDA CB1000R, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400FOUR(Air cooled), HONDA CB400FOUR (water-cooled), HONDA CB400SB, HONDA CB400SF, HONDA CB400SS, HONDA CB750F, HONDA CBR1000 F, HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250 R MC17, HONDA CBR250 R MC19, HONDA CBR250R (MC41), HONDA CBR250RR, HONDA CBR400R(NC23)
≒The cost effectiveness of ?2,000 yen or more is a large I am satisfied with it
Attention! Size is not suitable for ZrX1100 It is short The model listed is compatible
Tools used for installation
Impact Driver
Grip adhesive
(Webike buy POSH Faith Posh Face)
Driver、Cutter Knife
Gold Hammer
MONKEY Wrench
Once Axel (Right) exchange of drinks
【good point】
1.The vibration transmitted to the hand is suppressed compared with the Left because the rubber circumference became thicker I decided to change the Left after this
2. is the original Rubber worn out and slippery? So I think it was the right decision to replace it It's very easy to get used to, and very easy to grip
3.SmallThe throttle is opened by applying force to the finger side of the finger, but you can play by feeling (until now) (Was it slipping?) I feel like the number of
I think it's more Linear
4. I think that Accelerator operation at the time of starting became a little easier
5. Grip feels warm, perhaps because of my imagination
6. not long enough, but I'm happy with the results as thicker (thicker) was better than thin rubbers
Challenges
1. The installation was Large strange for me The Left Hantle which has not been replaced is a regret
2. We should have checked the size before replacing it, even if we managed to match the appearance
(My mistake) I think 125-130mm is the adaptive Size
However, the most common product type is 120mm
" I feel " is a lot of in-play expressions, but the cost effectiveness of ?2,000 is very Large size Satisfied
I can't recommend it
View detail
I fell
I fell on the WR250X and had a Hand guard on it, so I went with the Pierced Type of this I changed it
It looks better and more stylish than the OEMGrip
It has a good grip, but it does not reduce vibration
View detail