Reviews
easy to grasp
Good Grip, easy to grip normally.
Good to be able to Wiring.
View detail
I made a mistake.
I bought the Green Light color by mistake for the Yellow color, but that's okay because it looks cool. View detail
Softer than YAMAHA's TZ Grip
I have no complaints, it grips like crazy.
I often see people using Yamaha's TZ Grip, but I don't like the firmness of it.
I was looking for a good one and came across this product.
The grip power is perfect, the design is simple, and the price is reasonable.
I just think the Gloves side is depleting too fast because of too much gripping.
If you want to be stingy there, I recommend using a regular Grip.
View detail
Good Quality & Packaging
The item was delivered in good condition even I recieved it 1month after it shipped. The quality if good and the packaging of the item is very secured. View detail
Good Direct feel with firm Grip
[How is it used?
Touring in Pass Main - Circuit Driving Session
Was the installation difficult?
The Grip is quite stiff, so it was more difficult to install than the soft Touring type Grip.
How was your experience with it?
The Grip is thin and hard, so the direct feeling of Handlebar operation is strong.
It has a high grip and is not slippery.
I think the fatigue level is higher than the soft Gel-like Handlebar Grip.
There is also a wiring hall, so wiring is very easy.
There was not the phenomenon that the Other Brand ProductGrip was often rolled up and became tattered at the time of running about 5000km. I think durability is also high.
View detail
good
The delivery was very fast and above all, the packaging was very meticulous. The grip is very good and the design is very good. Thank you and you'll use it well. View detail
Comparison with Racetype
I've been a repeat buyer of Racetype.
This time I used the A450.
Merit
Wiring groove was not available in Racetype.
It's much easier to store.
The grip is just slightly thicker than the Racetype.
The dominoLogo is now large and has a strong presence.
Demerit
Maybe not as much as Demerit, but...
I've been using Racetype for years.
At first I felt slightly uncomfortable.
(You'll get used to it, though.)
Since there is no Open end
When installing Lever Guard or Bar End.
I think I'll definitely pull the end off.
If you lineup from the beginning ………
View detail
This is the only Grip I've ever used.
I used to have it on my Z900RS. There are a lot of colorings, so I can recommend to both flashy and plain people. I have the most modest Black Color.:Gray. View detail
Is good
The Cell's Switch was taken off when I fell over.
I think the OEM Switch sticks out too far, so I was looking for a compact, clean Switch and found the domino Handlebar Switch Cell/Kill Switch. It's very nice. I don't think I'll ever break another one.
View detail
Sporty
Installed on Initial Model GSX1300R.
Domino's Grip is often used by good people for some reason.
The size of this product is a little thin because it is called Race type.
Even I, with my reputation for bluntness, felt that ” I was slim ”.
DominoGrip has a few things here and there where the Logo part of Domino expressed by the switching of the two-layer structure is easy to peel off and tear, but this product was Large strong.
The feeling of operation is good, partly because it is thin and partly because Access to Lever is advantageous.
However, I think that the feeling of fatigue around the base of the thumb from the wrist accumulates when I use it for a long time like long-distance touring.
And it's called Race type. (?) The surface is exquisitely tacky.
It's not sticky or anything, but it has a so-called ”absorbing Grip” feel to it.
but the Life is shorter for it.
However, if you use it normally, it will last for a year, so if you think about the price, it's not so much of a burden.
Even though the Grip looks Large and sturdy, I tend to change it depending on my mood, so I feel like it will last a good amount of time.
About the installation to GSX1300R HAYABUSA
Large half SEA BASS cars are (?) The base of the throttle cone is tapered, and there is a rib at the end of the throttle cone to keep it in place.
Ribs can be easily removed with a Nipper or Cutter Knife.
For the root taper, it is necessary to grind the grip to fit the taper.
For this reason, when you cut the Grip to adjust the length, it is recommended to cut the root side.
View detail
Quintessential Racing Type
The High Solokit came with a safe BlackGrip. It came with a BlackGrip, but I chose to replace it with one anyway.
One of the reasons for the change is that it was a little too small monk-like because it was a full color grip of MADMAX until now! (Lol) 。
It's a Racing Type and the wall thickness is thin!
The slight vibration from the Handlebar is transmitted to the Direct.
This is Motorcycle. (or road surface) I think the enjoyment depends on whether you take it as information from or unpleasant vibration.
It's useful to have the Wiring Slit cut off.
View detail
Reliable Brand
That's what I'm talking about. The Fee Ring absorbs perfectly in your hand.
Logo mark is large and conspicuous.
Be careful if you buy bright colors. LOL!
View detail
Fairly soft.
Used on the Z900RS. It matches the simple and retro atmosphere, but not too old.
I was worried about KIJIMA because of TZ Type, but I chose domino because of its softness in Touring Main.
The TZ Type is slender but soft like RossiGrip, as expected.
There is no wiring groove, but it fits in the groove of the checker ring, so it is hard to shift.
The size is 115mm and 128mm while the grip width is 120mm on the BEET Handlebar.
I gave it a -1 for texture because there was a little bit of BALI sticking out and I had to cut it.
View detail
Playful and unique Grip
I made a new sub-Motorcycle VANVAN200 in order to customize it to Military style.
There are many different designs and colors of grips available from various manufacturers, but this is the only one that has the Camouflage pattern. This is the only one with Camouflage pattern.
As a result, the Camouflage on the matte Army Green and Black handlebar is very satisfying and Large as per Image.
The texture of the grip is high, and it has a good elasticity and non-slip effect.
The Grip is the part of the bike that is always seen when you straddle it, and if you are looking for a different Grip, why not include it as an option?
View detail
Used for DominoHandlebar
I bought this pad for my old handlebar which I took off from HUSQVARNA. The size was perfect. The size was perfect. View detail
Expected
[How is it used?
I've had it installed for about two weeks.
Was the one you received as per Image?
The Domino product was as expected.
Was the installation difficult?
I didn't have any tools and this was my first Custom, but with the Parts cleaner it was easy to install.
Remove the Bar End and apply a Parts cleaner in the Grip.
If the Grip becomes loose with Parts cleaner, pull it out. (If you don't use the OEM grips anymore, it's faster to buy them from Cutters.
Paint the Band and fit a new Grip and you are done. Or do the Wiring.
How was your experience with it?
Compared to the OEM, the Grip feeling is stronger and easier to grip.
[Included Parts:were they on?
Two Bodies, Domino's Sticker (Seal)
[Was there anything that disappointed you?
Not particularly
[ITEMS TO BUY TOGETHER
Parts cleaner, GripBand or Wiring
View detail
I hope it works!
It is a change from the Street Type of domino to this Turismo.
I was not dissatisfied with the Street Type, but when I replaced the OEM Bar End with an external Bar End, I felt a little bit of vibration due to the loss of weight, and my hands were tired when I drove for a long time. I bought this product because it looks good and the grip is thick enough to absorb some of the vibration.
It's thicker than the Street Type, so you won't get tired and the vibration is reduced in my opinion. I'm very happy with it!
In terms of design, Street Type is simpler and more to my liking, but I like the design of this one just fine too lol.
View detail
Used for yz125
I am using it with yz125. After all, Design is cool! The grip is not bad, and I think it is practical. The only thing is that I think it slips when Muddy is messed up.
If you are using Hand guard or Bar End, you need to drill a hole because the Type has no hole.
View detail
Off-road motorcycle also has Domino
I used Domino's for RaceGrip when I was on the road, but this Grip with Half waffle for Off-road motorcycle is also very good.
It is moderately thin, not slippery, and the Waffle part has a good cushion. it is almost Exactly the same size as the Pro taper handle size, so I could install it Exactly without the need for a grip bond.
If you are concerned about it, you can do Wiring.
View detail
STREET
Grip. Looks good too!
I cut the red part of the inside.
View detail