Reviews
As expected
I chose domino the same as last time. Usability and so on are the best in the past. There are also two Wiring places. As I used it, although there were some peeling etc. of the part of Black and Gray, I think that the durability is higher. I decided to exchange it due to a fall in this time, but I like it not to mention anything other than this Grip.
It is decided to kore after the next time.
View detail
Although the OEM is not worn out - - -
I exchanged it for a change of pace!
The color is matched with the color of the car body and it is cool.
I feel that I feel comfortable to run as I feel that I ran less than OEM Product.
It is Grip I'd like to exchange again as I rub on it.
View detail
I am comfortable
I used quite a lot of Manufacturer 's Grip but Domino' s Grip purchased I tried trying from what I did not know. I thought that the feeling that I weared is unexpectedly slim and I think that I can not rely on it for a moment but the feeling I actually tried is the fine feeling it is surprisingly surprising whether it is the thin material or the Material.
That point is also nice because I have never seen a lot wearing it.
View detail
I can not release it..
Until now I have been using thin for Race of TZ Type. I chose Street Type this time, but I will quite hand in hand. I do not mind the thickness at all. Where noteworthy is the Wire lock, when the Wire cutting process is done to accommodate the Wire cut end. This is good.
It also likes the place that is not too flashy.
View detail
Cool!
It is the DominoGrip I always use.
I can grasp it and run without any discomfort.
Another good thing about Style.
Delivery correspondence and speed are also perfect.
View detail
domino Grip Race Type
Previously, it was TZ Grip, but I did not like the Grip end part, I thought that there was no good thing, I found a good one. The feeling of use is very good. There is not much durability, but it does not matter. View detail
Black one color
NORMAL 's Black color is somewhat unsatisfactory, so I made it popular DominoGrip. The feeling you grasped well looks a little harder than NORMAL. View detail
It is too ordinary
Pro grip : Change from Superbike Grip # 601
PRO Gri feel like Compound is soft and sucks on the hand
Inevitably the fight is early, exchange it for Domino with reference to Impre
It is as hard and smooth as OEM
I got tired with grip strength needed
I am sorry I wonder if it will be what I've been getting lucky so far
Ease of use, Dress-up has no problem
View detail
Along with OEMGrip's Downs - - -
Running 30,000 km Finally OEMGrip's elasticity has gone, so I replaced my grip this time.
I chose the dominoGrip I was concerned with before from Design, but I chose this completely in Design.
The Grip exchange itself injected the Parts cleaner by inserting the slotted screwdriver into the gap, without troublesome so much.. Remove the OEMGrip and securely remove the remaining Grip bond with Parts cleaner. When inserting the dominoGrip, securely using Grip bond. Even though OEMGrip was removed from the Throttle holder, Bond was not attached, but I tried painting it up again at the time of this exchange.
Fixed one day free.
With a feeling of grasping - - - Harder than OEM. It may be a bit tired - - - Well I guess I will change again..
I think design is excellent for the time being.
View detail
The atmosphere of Italy is good.
I tried to install it in F4 - BRUTALE, I bought but Normal throttle was the one in High Solo.
It will be a lottery even at 53 degrees Ring.
I think that Design and performance are very good.
Titanium Bolt is also a point, but regrettably I will not be able to see the cars installed in the opposite direction.
View detail
Comparison
Compared to Pro grip I feel a hard feeling, but not long distances will not bother me. It looks nice and the price is reasonable, Pro grip is soft and blessed with blanket hair. View detail
I wanted to mount a high throttle to my vehicle. It was hard to make a decision which one to buy but I ended up with domino. I had difficulty when mounting to make it reach the throttle body but that was mainly caused because of the structure ot t
I wanted to mount a high throttle to my vehicle. It was hard to make a decision which one to buy but I ended up with domino.
I had difficulty when mounting to make it reach the throttle body but that was mainly caused because of the structure ot the vehicle. I have a 53 degrees open angle but can easily adjust it to maximum throttle.
The titanium screws are great. They will turn into a beautiful blue color if you burn them. It also has a firm grip that you would expect from a product of a popular manufacturer.
A bad point would be that the instructions are in English, which I couldn't read. It includes Japanese instructions but it lacks detail and says to look at the English instructions for more detail. lol. Well at the worst you just have to learn from practice.
When you try to open the throttle at maximum angle, parts inside the folder get into the way so you'll only be just able to get it fully opened.
The joints of the wires are loose so they'll go everywhere.
I used to have a high throttle of another manufacturer and the performance was better. Actually it cost cheaper than domino. Good for made in Japan products.
View detail
I was hesitating to order ACTIVE High Throttle or this one and finally chose domino because it looks good. But it isn't designed in detail. I found some small scratches on it as well. The color differs from the picture shown. Actually it's not shi
I was hesitating to order ACTIVE High Throttle or this one and finally chose domino because it looks good.
But it isn't designed in detail. I found some small scratches on it as well.
The color differs from the picture shown. Actually it's not shiny. The domino logo might come off soon as well.
Mounting is difficult and the instructions lack detail, so if you're not particular about tools, you might as well leave mounting to a mechanic.
Besides that, it's a good product.
The titanium bolts are awesome. It'll decorate your motorcycle casually.
Overall it's quite expensive.
ACTIVE High Throttle has better quality and cost benefit.
But I'm satisfied with these because nobody else has them.
View detail
I bought Domino's street type grips previously. But they were too thick for me to handle comfortably. I prefer thin grips. So I purchased thin race type model this time.They are moderately thin as I expected.The material is not rubber so they
I bought Domino's street type grips previously. But they were too thick for me to handle comfortably. I prefer thin grips.
So I purchased thin race type model this time.
They are moderately thin as I expected.
The material is not rubber so they feel a little hard but soon I got used to them.
I felt that vibration diminished.
Especially, the right hand numbness reduced.
View detail
I replaced my GALINDO super bike with this product.The primary difference is its smooth and slim design.There's almost no brim at the bar end area and looks simple.Also, the grip has the minimum knurling pattern. It doesn't get weirdly jam
I replaced my GALINDO super bike with this product.
The primary difference is its smooth and slim design.
There's almost no brim at the bar end area and looks simple.
Also, the grip has the minimum knurling pattern. It doesn't get weirdly jammed, and you can grip or slide it smoothly.
I have a high throttle kit, but not only did it facilitate the opening/closing operation, it made me realize the play amount more easily.
The rubber has double layer structure. The inner perimeter is rather hard and free of deflection or twists. The outer perimeter is soft but not weirdly twisted.
Still, it may not be that durable.
It is easier to install on handle bars or throttle pipes than GALINDO parts.
It is recommended for those who like to control their hand numbness by inner weights and make their grips have more direct touching feel.
View detail
I bought domino street model that everyone has been talking about recently.I bought black/green which was suitable to ZX-6R.The feeling to hold grips was good enough like sticking, but they were big because I chose street model!!I've been usin
I bought domino street model that everyone has been talking about recently.
I bought black/green which was suitable to ZX-6R.
The feeling to hold grips was good enough like sticking, but they were big because I chose street model!!
I've been using TZ grip type of other manufacturer, so I couldn't get used to it...
To get rid of them is under consideration...
But because I like performance and design of the grip, I'm thinking to buy domino race model next time.
View detail