Reviews
SR400 (1JR) TMR-MJNSpec. for cars.
I've been using Repeat ever since I replaced the carburetor.
I use it because I am more worried about insect infestation when I am stopped than about garbage and dust while driving if the funnel is bare.
I don't think it prevents foreign matter as well as the clogged Sponge Filter, but I feel that the Racing cab prevents some Garbage and minimizes its effect on the driving experience.
The performance is comparable to that of Filters made by well-known manufacturers, and the price is low, so I think it is a good cosmetic solution.
I don't think it's for people who don't like even a little bit of foreign matter, but for people like me who put on a Racing cab for performance and fee Rings. Insurance." I think it is just fine as a
View detail
How dustproof is it?
I used it over the Funnel of CRcarburetor.
I have been using a direct carburetor and was worried about sand and dust.
I'm wearing it for dust protection rather than performance upgrade.
View detail
Dry and easy to use
The RAM air filter that I used before burned up with the BlueFunnel of FCR Carburetor BodyIncluded Parts:, so I replaced it with U-KANYAAluminum Funnel and 3D Air Filter.
Since then, I've been using it for about 5 years, but I've had to get rid of it because it's starting to produce fine sponge residue!
The SJ was the same, no problem, and the AS and PS were adjusted accordingly.
The best thing about it is that it can be used dry without Filter oil, and it's great that it doesn't get sticky on your hands when setting.
But in return, the carburetor gets dirty faster and I've doubled the frequency of carburetor cleaning!
It's suitable for people who play Setting.
Large Garbage does not enter, and it is possible to remove it easily. It did not burn with a little BackFire.
View detail
3D Air FilterQuantity:1 Set of 4pcs.
I bought this as a filter for Funnel, and the Funnel effect is still reduced when I add a filter.
It is good that it doesn't ignite even in the backfire.
View detail
SEROW250
Bought this for my SEROW 2020 for CheckLamp erasure.
I was able to erase it successfully with al-319.
JOBD can't be used because of the difference in standards.
View detail
If it didn't burn, it would have been a perfect score
CR38φ used in OEM LFunnel, car is a '92 SR400
I wanted something with as little intake resistance as possible, so I went with this one From the results, it's a Large success & the hellip; burns
The product description section states I don't recommend LFunnel as it bottoms out But if you insert it shallowly and fix it with Tie Wrap etc., there is no problem in that regard None
The shape of the funnel and the fact that it's a dry system works
There was no change in the Fee Ring, so I forgot I had it on for a while Yes, until it burned (I'll say that twice because it's a Large thing.)
However, if it's 1pc.2,000, I think it's a Level that I can put up with even if it burns occasionally hellip;? I'd cry if it was a four-cylinder
In any case, a fire extinguisher is a must
View detail
It might be better than RAMAIR at all
TMR36 (Mikuni) FunnelSpec. Because I got it, I was worried whether to ride as it or powerful. If it is Powerful you have to buy from Adapter and Funnel will buy it because it is concerned about dirt. It is convenient to use without dropping Funnel's Power View detail
Previously I was using RAMAIR.
Previously, wet RAMAIR was used, setting was also slightly diluted, the best setting did not come out.
I just happened to find this item at Jom's Homepage and I knew that I sold it on Wa Big, so Quantity : 1 Set of 4pcs. I bought.
The price is also cheaper than RAMAIR, so you can install it easily because the installation does not tackle your hands.
Setting is unnecessary, but it certainly could be seen as darker than RAMAIR, so it seems that there is little inhalation resistance as it is dry.
Also, once washed, the cleaning solution was cloudy, so I think that you can expect a dust collection effect.
However, one disappointment is that my Filter had a part where the Sponge's glue part had deviated, for the time being, it repaired with Konishi Bond's G17, but I am worried when it will peel off.
Also, it is the fate of Sponge filter, but as it gets old it will be torn down and it will be a concern for the durability of this product.
Those who are wearing the Racing carburetor, I think that it is better to wear the Filter in order to extend the life.
View detail
Fallen cannibals
FCR Carburetor Body 37 installed in Pie BlueFunnel.
Apart from fine chili, insects - It is a feeling in preparation for invasion of gravel etc..
"Dry and burning hard" I chose it in that way.
Regarding the mounting, the object's elongation was also good, and it was easy to attach Funnel to the carburetor.
I would like to see the contents at the next carburetor cleaning.
View detail
FunnelSpec. Change to
Previously I was using RAMAIR filter ... I did not like sticky dedicated Oil and put Piper Filter in Air cleaner Box. This time, purchasing Curl type Funnel and 3D Air Filter and FunnelSpec. change to. Carburetor setting also left the old data filled in, so finish and finish ♪ Heat protector Create a wind protection wall with Aluminum Plate and pat on look Racer like! Intake sound at RACING makes that feel It is easy to wear and disassemble Because it is cheap, I think that if you get hurt you will also choose the next Jam 3D Air Filter.
View detail
Although the carburetor is also Cool
Funnel is exposed, Cool is worried about the inclusion of foreign matter.
When overhauling the actually used carburetor, there was a scratch and there were quite a few expenses for exchanging Parts.
There used to be a time when I was using RAMAIR.
I will try how much the ride taste of this product will change.
It seems easy to maintain, so I would like to check it with beans.
View detail
Setting unnecessary?
I replaced my carburetor with FCR Carburetor Body and purchased as a countermeasure against Garbage's inhalation. Instruction Manual can be used without setting (It is written that some are excluded) There was, but ... setting was still necessary.
Although it said only Throw type adjustment was done.
If it is a 4 carburetor, a little hang is necessary for installation, but if you get used it will not be a problem.
As it is not wet type like other company Filter, installation - The hands do not get dirty for removal, and it is better not to get dirty with Oil attached to the legs even if you ride.
Exchange ... Because we have only a few hundred kilometers on here (Lol)
View detail
[Webike Monitor] With the Funnel specification of a FCR CARBURETOR, since it was difficult to let an automobile inspection pass, it equipped.Although the RAMAIR has been used with the Filter of a Sponge system about the products before,
[Webike Monitor] With the Funnel specification of a
FCR CARBURETOR, since it was difficult to let an automobile inspection pass, it equipped.Although the RAMAIR has been used with the Filter of a Sponge system about the
products before, and the Filter neighborhood of the time of attachment and an attachment rear car object might become dirty for the wet type, 3D Filter does not have such dirt for dry type, and is very good.
Although it is the method cling,Since the half of pure Cleaner BOX which has attached it since attachment is impossible unless it pulls considerably although attached by the thickness of a Filter since a Funnel gap is near, and since it has equipped with the Carburetor cover by our specification remained, it removed and equipped with the CARBURETOR.Since it was fairly serious although it pushes in since
honesty and the Filter at the time of CARBURETOR wearing have a Volume, but it is based on our specification, the neighborhood is by reference.
It seems that attachment of it is impossible unless it
Removes a CARBURETOR since it must pull considerably to a Funnel at the time of 3D Filter wearing even if Cleaner BOX does not stick, although many.Since a use rule of thumb is 10000 km as a
filter facility according to the description in a Maintenance, even if it compares with an original manufacturer's product, I think that it is the about the same.
It seems that it is usually OK in washing in cold water at neutral detergent, and the Cleaner Kit is sold also about dirt again when dirt is intense.In the touch which equipped and ran Setting change of the
carburetor although we were only a few, I think that there is no necessity for resetting.Although it becomes the
last, and wearing takes some time and effort, I think that they are very good goods.Moreover, I think that the single article sale to each cylinder is very kind even if transformation of a Filter by attachment condition and the tear of the Filter by carelessness occur.However, I think that it is the structure which the sign of being torn does not have and became brave dramatically even if it pulls considerably.I think that it will be value even if it compares with the Filter of the other company also in
price.
View detail