Reviews
It takes a long time to deliver other than
I was looking for a FunnelFilter for my CUB with YDcarburetor, but the cost was higher than Power Filter and Filter adapter, and the overall length was longer, so I was thinking about it. I found that FunnelSocks seemed to be a good choice, so I decided to change the spec.
I am glad that the total length was short and there was no other Wobble.
Wobble may form as the Sponge grows, so it needs to be monitored.
View detail
JAM Jam 3D Air Filter (1 Set 4pcs.)
I use it with TMR-MJN FunnelFilter, but it may burn with BackFire from carburetor after about 3 years of aging. So it is only used for carburetor inspection only. View detail
SR400 (1JR) TMR-MJNSpec. for cars.
I've been using Repeat ever since I replaced the carburetor.
I use it because I am more worried about insect infestation when I am stopped than about garbage and dust while driving if the funnel is bare.
I don't think it prevents foreign matter as well as the clogged Sponge Filter, but I feel that the Racing cab prevents some Garbage and minimizes its effect on the driving experience.
The performance is comparable to that of Filters made by well-known manufacturers, and the price is low, so I think it is a good cosmetic solution.
I don't think it's for people who don't like even a little bit of foreign matter, but for people like me who put on a Racing cab for performance and fee Rings. Insurance." I think it is just fine as a
View detail
Used with V-MAX FCR Carburetor Body...
I tried to use it because it was cheaper than RAMAIR, but after installing it, I found that it would not blow at high RPM.
I found the cause as soon as I removed the Tank Cover and ran the car.
The filter was deformed at high RPM, and it was like a lid on the funnel, blocking intake airflow.
I'm back to RAMAIR again.
View detail
He's a long-lived man.
Compared to the RAMAIR I used to use, I think it will take longer to wear out. Also, the dry type is good for maintenance. It takes a little hang to install, but once you get used to it, you'll never have to worry about it being too large.
I made a hole in the bottom and put the hose from the catch tank back in there to make it a Japanese Vehicle Inspection Correspondence.
View detail
How dustproof is it?
I used it over the Funnel of CRcarburetor.
I have been using a direct carburetor and was worried about sand and dust.
I'm wearing it for dust protection rather than performance upgrade.
View detail
Dry and easy to use
The RAM air filter that I used before burned up with the BlueFunnel of FCR Carburetor BodyIncluded Parts:, so I replaced it with U-KANYAAluminum Funnel and 3D Air Filter.
Since then, I've been using it for about 5 years, but I've had to get rid of it because it's starting to produce fine sponge residue!
The SJ was the same, no problem, and the AS and PS were adjusted accordingly.
The best thing about it is that it can be used dry without Filter oil, and it's great that it doesn't get sticky on your hands when setting.
But in return, the carburetor gets dirty faster and I've doubled the frequency of carburetor cleaning!
It's suitable for people who play Setting.
Large Garbage does not enter, and it is possible to remove it easily. It did not burn with a little BackFire.
View detail
3D Air FilterQuantity:1 Set of 4pcs.
I bought this as a filter for Funnel, and the Funnel effect is still reduced when I add a filter.
It is good that it doesn't ignite even in the backfire.
View detail
Cheap and functional.
It stretches better than I thought it would, and I was very careful when I put on the first one, but after the second one, it was strong and easy to wear. I'm glad I bought it, although the unique smell is a bit annoying. View detail
I ended up going back to RAMAIR
used in vmax
The high rotation crushes the top edge, and it's like a lid on it
It became a resistance, and I couldn't blow at high rpm
I ended up going back to RAMAIR
View detail
Surprisingly, there's a lot of intake resistance
This product is used in Dry and has almost no air intake resistance (the manufacturer is also I've been using it for a while now Quantity:This is the 2nd Set However, when I put it on the Chassis dynamo and measured the af, there was considerable resistance and
If you consider Funnel as a base, it's about MJ2Rank thicker Under the same condition, k&NPower Filter has more maxPower than k&NPower Filter You should think that the maxPower drops by 5hp even if you sette-ing it again 。
View detail
I used it on the FCR Carburetor Body, but..
i put it on my fcr but it doesn't smoke as much as I expected, and it doesn't run mid to high RPMs under cover
It has to be a pretty thin setting 。 The goodness of the FCR Carburetor Body is gone, so it's going to the Garbage box
View detail
If it didn't burn, it would have been a perfect score
CR38φ used in OEM LFunnel, car is a '92 SR400
I wanted something with as little intake resistance as possible, so I went with this one From the results, it's a Large success & the hellip; burns
The product description section states I don't recommend LFunnel as it bottoms out But if you insert it shallowly and fix it with Tie Wrap etc., there is no problem in that regard None
The shape of the funnel and the fact that it's a dry system works
There was no change in the Fee Ring, so I forgot I had it on for a while Yes, until it burned (I'll say that twice because it's a Large thing.)
However, if it's 1pc.2,000, I think it's a Level that I can put up with even if it burns occasionally hellip;? I'd cry if it was a four-cylinder
In any case, a fire extinguisher is a must
View detail
It might be better than RAMAIR at all
TMR36 (Mikuni) FunnelSpec. Because I got it, I was worried whether to ride as it or powerful. If it is Powerful you have to buy from Adapter and Funnel will buy it because it is concerned about dirt. It is convenient to use without dropping Funnel's Power View detail
Adhesion is sweet
Immediately attached, the adhesive surface has come off. Every 4. It will not be used. I am afraid that I can not use it because I think that I think that Sponge will be sucked into the carburetor at the worst,. It seems there is no Gasoline resistance. It is not a product of Large Ki Manufacturer so I did not expect much, but I think that I would not sell such a thing. It is far from OEMQuality. Oil is necessary but RAMAIR's Sponge never got Rose. View detail
I like it..
Originally I was using RAMAIR but after about 2 years passed by aging deterioration ...
Because it is absolutely necessary at the time of vehicle inspection (Because it is TMR) I was going to buy the same thing.
Were you JAM, did you find this product on HP's Webike too?
Do you have a search?. It goes without saying that I bought it.. As a reason for Recommendation
?RAMAIRetc. It is made with Material which is hard to burn unlike.
There is also a repetition from carburetor, so it will be creepy if you burn.
? It is difficult to aged deteriorate? It felt it was used for a long time since purchasing.
Three years have passed since purchase, but there is no sign of deterioration.
It is still possible to use It is easy for Wallet without need for repurchase.
?attachment - removal - Maintenance is very easy.
Jab Jab easy in Bucket with neutral detergent !!
? Since the mounting opening is Offset, Fitting cleanly.
When this type Filter is attached to TMR, Filter becomes oblique
You can install it neatly if the top and bottom are reversed. The characters are reversed.
View detail
Previously I was using RAMAIR.
Previously, wet RAMAIR was used, setting was also slightly diluted, the best setting did not come out.
I just happened to find this item at Jom's Homepage and I knew that I sold it on Wa Big, so Quantity : 1 Set of 4pcs. I bought.
The price is also cheaper than RAMAIR, so you can install it easily because the installation does not tackle your hands.
Setting is unnecessary, but it certainly could be seen as darker than RAMAIR, so it seems that there is little inhalation resistance as it is dry.
Also, once washed, the cleaning solution was cloudy, so I think that you can expect a dust collection effect.
However, one disappointment is that my Filter had a part where the Sponge's glue part had deviated, for the time being, it repaired with Konishi Bond's G17, but I am worried when it will peel off.
Also, it is the fate of Sponge filter, but as it gets old it will be torn down and it will be a concern for the durability of this product.
Those who are wearing the Racing carburetor, I think that it is better to wear the Filter in order to extend the life.
View detail
JAM 3D Air Filter on Normal cab
The installation of the Air Cleaner Box is too big, so if you gather information with Net you can wear it like a wisdom ring.
Give up, purchase Racing cab and get information such as Funnel + Filter.
With information of a certain Motorcycle shop I found an image fitted with 3D Air Filter to Normal Carburetor.
Things to buy, buy quickly.
After opening the goods, will you fall on Normal Carburetor will you fall down with the poros?
If you try Duct which connects Air Cleaner BOX and carburetor to pseudo Funnel, it is easy to finish the installation.
Actual driving has not yet been done, Engine took no problem.
This may be easy and easy, but I am worried about falling down.
View detail
Exchange
The lifetime of the thing which I used up is exhausted and this time I bought this Filter. I decided on this product that I was concerned about since the previous thing is dirty around the carburetor because the grooming is Large strange because it is wet. Because it is a dry type, suction efficiency seems to be good. View detail
Filter is mandatory for me
SR 400 FCR Carburetor Body 39 φ and Bore Ace made Air AssistFunnel (Long Specification) I am using it.
"The fine dust is not exhausted and it mixes with the engine oil and even passes through the Oil Filter and it continues to hurt the engine interior endlessly (Even if Oil exchange is frequent, it can not escape). "
Since I was getting information from those that I trust personally, I applied RAMAIR filter Oil and attached it from the time of Funnel conversion.
Although I exchanged here for Reduction in cost, it seems that it is OK with basic dry type, but I applied Oil of RAMAIR filter to ride like everyday and used it.
So, the photo was taken when washing the 3D Filter, but in just a few months it was a little like this, in the dry style dust that seems to have gone through has come out in large quantity.
I applied Filter oil to what I was purchasing in spare and worn it, but I applied Shift to a slightly dark Setting due to excessive application.
Originally, as I was setting it to a thin sense of experience with Hot start countermeasure, I got to like the ride taste itself w.
View detail