Reviews
Very comfortable to grip and durable.
I used it on a CUB that I made into a Bar handle.
Until then, I had been using KITACO's TZ Type, but my hands were still sore. I think it is not only thin but also not suitable for Small Engine Displacement Volume vehicles like CUB, which always have to be twisted to a large amount.
So, we used this classical type. I had originally wanted to use this Jack Hammer type, but I was hesitant because it has no flange, it is too long for Small Type Motorcycle, and it is only for 25.4mm Inch bar.
I was also wary of thicker type grips because the Barrel type grips were also very tight in my hands.
There are no basic installation problems.
Since the length is too long for the CUB of the bar handle, we cut it at the border between the vertical rib and the flat part, packed about 1.5 cm, and glued it together.
It is a vertical Rib, so it is not noticeable when cut.
The comfort is great, no fatigue at all. I never get tired at all, my hands get sore after 40km with TZ Grip, but with JackHammer I don't get sore at all even after 200km.
I thought the fatness might tire some other part of the body, but not at all. The nightmare of the old Barrel type has been blown away.
The lack of a brim is not a problem, in fact, the brimless version might be more flexible in the position of the hand and less tiring?
It is also very durable and shows no signs of wear or cracking even though it has been used for a considerable number of years and distances.
The end part seems to be sticking out a bit recently, but I don't mind.
I want to put it on my SR because it is so good. I have a Superbike Grip on my SR, and it works fine, but I'm not sure if it's a good idea.
If I may say so, it would be better to have a 1 to 2cm shorter version from the beginning. It is too long even for normal motorcycles because it was originally designed for big Americans.
View detail
Good material
Material of the handlebar was solid and sturdy. Welding was also done good. Confident to ride. Would recommend to everyone looking for the same handlebar View detail
YAMAHA BOLT Shoulder Bag (ABS made of 2022) Used in
The angle is more gentle than the Robot Handlebar made by ALCAN hands that was previously used, and even if it is tilted forward, the angle of the wrist does not become tight, so there is more freedom of adjustment, and the position feels easier here.
The brake hose is a HURRICANE brake hose joint. (20cm) If it had been 15 cm, it would have stuck out.
View detail
Recommended!
Valve should be replaced.
Shape, cool!
View detail
It looks good on Chopper.
The size is compact, but the brightness and plating makes it a great blinker for the Chopper-style Custom. It's a great blinker for the Chopper style Custom. View detail
Stylish jet helmet.
It's a simple and comfortable helmet with Black color, SG Standard, Size adjustment with Sponge and One-touch Belt. View detail
It's not too bright.
I installed it for the purpose of Custom with Retro feeling rather than seeking brightness, but it is unexpectedly bright and has a sense of presence. The quality of the Plating BodyBody is very good with the thin Compact size. View detail
It's neither good nor bad
The shape and texture are exactly what I expected The price is lower than the other ones, so I'm happy with it for now It's a good product You can't buy it at this price if you want a more detailed product View detail
Chopper strongly
Until we exchanged with this Handlebar, we had NEO FACTORY 's 6Inch, but as I was driving over a long distance the height was so low that my back was somewhat sore, so this time I made this CLASSIC FACTORY' s 8 Inch Saw.
The effect of 2Inch Up was reduced and the pain on the back was alleviated, the gaze became high and the driving became very easy and I am satisfied!
However, in the case of BOLT Shoulder Bag, Z-Bar (Robot handle) Up to 6Inch, Wire, BHose, Wiring can be exchanged as OEM but in order to make it 8 Inch only BHose and Wiring will not reach Wire in OEM, so we purchase KIJIMA's 70mm long Clutch and Throttle Wire separately it is necessary.
Incidentally, this time the replacement work is M. G. I asked Goods.
View detail
5.5 Inch Bates LightBlack!
Although I purchased ClassicFACTORY's product for the first time, painting was also beautiful with firm making.
4. I got lost as 5-inches, but because there was no Yellow Lens 5. I tried to 5 inch.
Valve attached from the beginning is H4 55W / It is 60 W.
LED Bulb is also likely to enter the depth.
View detail
For people who can do DIY
I like this form because I like it.
The person who installs only drills Cowl and stops with Screw, but since that Screw is not attached, one star deducted.
Since the thickness of Cowl etc can be assumed to a certain extent, it would be appreciated if you could have Screw of the appropriate length included. It is to make the price as it is.
I think Screws included in other company's products (It was a bit too long Screw in it, but it is better than not having Screw in the first place).
View detail
Simple is fine as it is thin!
I used it in Bar handle of CUB 90.
Wiring is 1 pc and there is no high beam. I fixed the Mirror 8 mm → 10 mm conversion adapter in the CUB Front carrier fixing hole. It works without problems with Body ground. I got lost as Clear Lens, but Yellow color is also nice.
View detail
A good point: Since the iris diaphragm angle did not almost have the Robot handle attached before, the burden had been placed on the palm, but it was good more than operativity considered, since this product has an iris diaphragm angle, the upper part of
A good point: Since the iris diaphragm angle did not almost have the Robot handle attached before, the burden had been placed on the palm, but it was good more than operativity considered, since this product has an iris diaphragm angle, the upper part of the body was raised and it operated.
An angle offensive above all is good!
In the direction of Style serious consideration, it is recommended.
a bad point: I think that appearance will be carried out if processing of welding is beautiful to a slight degree.
View detail
Since it can unite with the Position which sits down since there are two simultaneous purchase (Under bracket is also purchased) attachment Bolt holes to 250TR at the time of Solo-seat attachment, isn't it quite good? Since the Bolt which sto
Since it can unite with the Position
which sits down since there are two simultaneous purchase
(Under bracket is also purchased)
attachment Bolt holes to 250TR at the time of Solo-seat attachment, isn't it quite good?
Since the Bolt which stops a
free and a Under bracket is not attached, he has to buy according to.
Since a mounting hole has only that of one thing in case of right although there is the above-mentioned Set thing, although carried out here, I want the Set of the
Bolt nut to be attached.
View detail
The Yellow Lens was looked for. Although it is budget prices Structure is solid. A Yellow Lens suits a black car body. very good Makeover was completed.
The Yellow Lens was looked for.
Although it is
budget prices Structure is solid.
A Yellow Lens suits a black car body.
very good
Makeover was completed.
View detail
[Webike Monitor] This product was purchased in order to use the Chopper custom. I think that they are easily exchangeable in comparison since book products are not common Body grounds and a cheap article has a Minus code perfectly. I thought tha
[Webike Monitor] This product was purchased in order to use the
Chopper custom.
I think that they are easily exchangeable in comparison since
book products are not common Body grounds and a cheap article has a Minus code perfectly.
I thought that it was small on the
numerical value.
If it arrives, it will be thought large that it is unexpected.
Since it is conspicuous that much, doesn't it become a good Accent?
If it loosens since
Visor portion is being fixed with the Screw, it can adjust to its favorite angle.
View detail
Although not made to a High beam, the light is switched on with one wiring. They are those with the necessity of drawing wiring by oneself when a Minus cannot be taken since the Minus is a Body ground.
Although not made to a High beam, the light is switched on with one wiring.
They are those with the necessity of drawing
wiring by oneself when a Minus cannot be taken since the
Minus is a Body ground.
View detail
Since the picture attached to TW200 cannot be raised, I am sorry. Although not found probably because of the Clear lens, the circumference of a Tail becomes tight and it is visible.
Since the picture attached to TW200 cannot be raised, I am sorry.
Although not found probably because of the
Clear lens, the circumference of a Tail becomes tight and it is visible.
View detail
Since the Earth is a Body ground, only Plus wiring is connected. It is a Recommendation to the direction which cares about wiring.
Since the Earth is a Body ground, only Plus wiring is connected. It is a Recommendation to the direction which cares about wiring. View detail
A Front bracket is also sorry about structure being solid and mistake nothing and a free Bolt not attaching simultaneous purchase and both.
A Front bracket is also sorry about structure being solid and mistake nothing and a free Bolt not attaching simultaneous purchase and both. View detail