Reviews
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY, HONDA GORILLA, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Commonly usable
Blinker relay of 6VMONKEY was broken, so I replaced it with this one. There is no particular problem, but the unique clinking sound of the blinker is gone, which is Minus. View detail
Fits: HONDA shirley, HONDA dachshund
I put it on CHALY.
We have a product BALI, so we have to prep it.
Painted. I think it is good for the price.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
CHALY That!
CHALY I bought it to make a thicker footprint of the I am satisfied with the cheap price. View detail
More than Bore up.
Swapped from SUPER CUB 50 OEMEngine
With Engine itself pon
The carburetor came with a 16π? The carburetor came with a 16&pi carburetor, but I used a pc20 funnel and a YOSHIMURA intake manifold. The rest is KITACO clutch wire and clutch lever.
FSprocket exchanged R for 15, or was it 38?
I'm not sure about Included Parts:as you don't mention it specifically,
I tried to use the Indicator and found that there are two in the box, one for the carburetor side and the other for what? I tried to use the Indicator and found two in the box, one for the carburetor side and one for what? Well, I don't need it because CUBOEM13π is obviously not enough for 86cc lol.
The original engine oil was replaced with G2Oil after warming up and breaking in salad oil.
I don't know about the attached carburetor, but after breaking in, full throttle, well, thanks to the pc20, the CUB is no longer a CUB. 60kmMeter is swept away in about 5 seconds.
Another AA01 centrifugal 3 speed 88ccHigh Camshaft18πcarburetorOthersSprocket uses the same size, well, Gold amount is more expensive to bore up, so it is still recommended for those who want Manual clutch.
Installation can be easily done by one person.
The difficult part would be to modify the terminals to match the Engine side when using OEMHarness.
I think it would be more of a hassle to replace even the Harness.
As you may have read in other sites or on our side, the first time GEAR enters the market, it is very reluctant to do so.
Neutral goes in for me, but I often have trouble returning to 1st gear from 2nd gear.
The wiring diagram in the Instruction Manual was Harnessfor MONKEY, but the color was the same in CUB.
I don't know how durable it is since it is currently just loaded, but I hope it was a hit.
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Easy to change carb position
Casting seems very strong, however the casting port hole for the engine side is not perfect. I'll need to use a Dremel to tidy up the port as can be seen in the photo. Otherwise I feel it will not produce as good as power as it could. Installation is very easy on monkey due to being able to position the carb however you like. Product was priced well just a shame about the casting hole. Webike is always very quick with shipping A+ View detail
Cute colors.
[How is it used?
Purchased for 4Lfor MONKEY.
Both the OEMTank and my previous Chinese Tank have rusted and I bought the Tank because it was cheap. The other Tank will be rusted out etc. while I use this Tank.
The color was a lovely Yellow color, which was the deciding factor in my purchase.
Was the one you received as per Image?
I am glad that the color was exactly as I had imagined in the picture of the product.
Unfortunately, it looked like the inside of the Tank was rusty, although only slightly.
I think the cospa is good.
Was the installation difficult?
Simply remove the OEMTank and attach it in the same manner.
Rubber parts for the tank are removed from the OEMTank and reused.
It is not that difficult a task.
I thought I had the Fuel Cock on tight, but it started leaking when I added Gasoline, so you should be careful and make sure it is closed tight. I re-tightened it and the leak stopped.
How was your experience with it?
First of all, it looks cute. As soon as I put it on, it felt right. I was glad I chose this one, because I could have bought a paint base, but it would have been too much trouble. If I get tired of it, I will paint this tank.
The size is perfect, and I'm happy with it.
[Included Parts:were they on?
Fuel Cock and Key x2pcs. and 2 types of GasolineTube were included.
[Was there anything that disappointed you?
It is supposed to be new, but it looks a little rusty inside the Tank, which is disappointing. Other than that, I am satisfied with the cosmetics.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Focus on appearance
[How is it used?
Purchased for 4Lfor MONKEY.
I was looking for a down type muffler because the exhaust system and carburetor seemed to interfere with each other when replacing the carburetor.
Among them, I bought this product because it looked cool and was reasonably priced.
Was the one you received as per Image?
The color and shape were exactly as shown in the Image.
Was the installation difficult?
It is not difficult.
At first I thought the exhaust bracket was not long enough, but I was able to install it by installing the bracket near the with Gasket very loosely and tightening it after applying the bracket. I am glad that I was able to install the bracket, although I feel that it is not the perfect size.
There was no Instruction Manual for handling, but it was Large sturdy.
How was your experience with it?
I chose it for its looks, but when I actually installed it, I thought it was even cooler than I had expected.
I'm a little worried that the bracket part is not the right size, but so far I have no problem with it.
The sound was quite loud. It's not like an explosion, but the sound was on a level that might bother the neighbors.
I would have liked it to be a little quieter.
[Included Parts:were they on?
There were none in particular.
[Was there anything that disappointed you?
The size of the product is not Exactly, and there was some uneasiness when installing the product.
It is a conforming product, so it should be fine, but I wish it had a more Exactly feel to it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA CHALY 70, HONDA DAX70, HONDA MONKEY, HONDA CHALY 50, HONDA CHALY 70
Recommended!
It seems a little stiff.
It's extra because it's flat….
View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 50, HONDA CUB, HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Recommended
If you don't care about how it looks, why not?
There is a matter of taste.
It's cheap, so I'm happy with it.
View detail
I like the sound of Idling.
As a CHALY rider, I would love to have this Aardvark.
I had no trouble with Exhaust System,
I couldn't help but notice those popping mid-high notes.
And I had to buy it because it ran out of stock quickly.
The Engine is multiplied by the Idling.
It is a Sound that is kind of fun.
I don't think it's suitable for turning Pushing
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY, HONDA GORILLA, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Blinker with excellent cost performance
Orange colored sphere on transparent Lens with good visibility of reflector.
Wiring is also made easy with a Bullet Type Terminal attached to the tip.
You may need to be a little careful about how much you tighten the fixing nut.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
OEMCap, Cookok, used for external +3cm
I also have an OEM tank and I think the mounting holes and other dimensions are the same as the frame. The Black and White are painted and the Black is painted. The welds around the cook are slightly rusted on the inside back, but I don't think it will be a problem in use, so don't worry about it. The weld finish is inferior to the OEM tanks, but I would recommend this one if you are looking for an OEM used one to redo for a better price. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Comparable to OEM Products
[How is it used?
OEM Product was damaged.
Was the one you received as per Image?
The workmanship is so good that it is indistinguishable from OEM Product
Was the installation difficult?
It was easy to replace with one Spanner.
How was your experience with it?
Comparable to OEM Products
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
Communication failure? Repost.
If you are OEM with Cell motor, you don't need to buy CUB harnesses.
[How is it used?
I purchased this LITTLE CUB to improve its street riding performance while restoring the long-neglected LITTLE CUB that was handed down to me.
From a friend Cheap Bore Up Kit." recommended, but I wanted to save the Normal engine for the long run in case of an emergency. "What can we do to help?" I found this product while browsing Webike's site.
Was the one you received as per Image?
I decided to purchase the product after seeing the introduction image in the Site and the video of the person who installed the product in the Video Site, so the product was just as I had imagined.
Was the installation difficult?
Simply replace Engine Only." Then it is not difficult because it only requires 2 Bolts and Wiring removal.
However I can get on board with no problems." It requires some knowledge and Large amount of effort to bring it to the state.
How was your experience with it?
We have not been able to gain any distance since installation, but so far it is running fine for the amount of work we have put into it.
But if you look at the Review here and the video Site. Maybe it's not just a safe ride forever?" It's like...
I think I have a hit ha Gap. Bingo I just hope that we are pulling the
[Included Parts:were they on?
35,680 yen in bare bones with Engine (14 Driven Sprocket included) Body, Carburetor, Intake, Kick pedal, Change pedal, Relay and CDI etc...
I have added Harness for CUB with Option, "Elementary." I believe that a MONKEY type Harness will be included in the state of
If you are a MONKEY type. "Elementary." Kit may be enough to form a Large body (wishful thinking).
[Was there anything that disappointed you?
from the start Harness for CUB The Optionally purchased Harness is almost identical to the OEM Harness that originally came with the vehicle, and was a waste of money for a Harness that will not be used.
And to begin with, the Harness on the Engine side does not match the Harness for the CUB purchased with the Option.
I went all the way to this Engine. Harness for CUB What an Option if it is available! Harnesses the Wiring process to fit this Engine. The Harness side is the OEM standard Wiring & Connector, but the Engine side has a completely different Wiring process.
OptionHarness was never used at all because the Engine side Wiring process & processing had to be done.
Forced to think Positively No Cells. It may be good when installing in a CUB, but my CUB was with Cell motor, so it was a complete waste of Gold (of course, at the time of purchase, there is no mention of harnesses to make a Cell-less unit Cell-compatible).
Everything. Universal Type. So, in the CUB system, with the attached carburetor & intake manifold. OEM style." I can't get around the (is it Large sturdy if it's a MONKEY?). (Would MONKEY be Large sturdy?).
Other items that would be helpful
Point and hang of installation
The level of difficulty will increase unless you are able to see and understand the wiring diagram.
[Availability and clarity of the Instruction Manual
An Engine Wiring Diagram for Tanaka Shokai is included in the package, but it is not sufficient, so a Wiring Diagram for the vehicle you wish to install is also required.
Setting may not fit in a pontoon, and this is a product for those who can enjoy and adjust it.
[Notes]
Please check the introduction & description section of the product carefully.
I was fortunate to have a friend who was good at electrical systems, so I asked him to do the Wiring process (a whole lot of work).
If you are a beginner or not good at electrical stuff, as I am. "Decent friend." It may be better to rely on a professional or paid PRO.
[ITEMS TO BUY TOGETHER
If you want an OEM look. SUPER CUB90 If you want to create a custom look and feel, you should buy custom parts to go with it.
[Opinions and requests to Manufacturer
Even though it is an overseas product, it is very nice to be able to purchase Complete engine at this price.
In addition to the engine, the Honda Horizon TypeEngine vehicles have a wide selection of parts at reasonable prices.
View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
If you are OEM with Cell motor, you don't need to buy Harness for CUB, but Large sturdy (Wiring is required anyway).
[How is it used?
I purchased this LITTLE CUB to improve its street riding performance while restoring the long-neglected LITTLE CUB that was handed down to me.
From a friend Cheap Bore Up Kit." recommended, but I wanted to save the Normal engine for the long run in case of an emergency. "What can we do to help?" I found this product while browsing Webike's site.
Was the one you received as per Image?
I decided to purchase the product after seeing the introduction image in the Site and the video of the person who installed the product in the Video Site, so the product was just as I had imagined.
Was the installation difficult?
Simply replace Engine Only." Then it is not difficult because it only requires 2 Bolts and Wiring removal.
However I can get on board with no problems." It requires some knowledge and Large amount of effort to bring it to the state.
How was your experience with it?
We have not been able to gain any distance since installation, but so far it is running fine for the amount of work we have put into it.
But if you look at the Review here and the video Site. Maybe it's not just a safe ride forever?" It's like...
I think I have a hit ha Gap. Bingo I just hope that we are pulling the
[Included Parts:were they on?
35,680 yen in bare bones with Engine (14 Driven Sprocket included) Body, Carburetor, Intake, Kick pedal, Change pedal, Relay and CDI etc...
I have added Harness for CUB with Option, "Elementary." I believe that a MONKEY type Harness will be included in the state of
If you are a MONKEY type. "Elementary." Kit may be enough to form a Large body (wishful thinking).
[Was there anything that disappointed you?
from the start Harness for CUB The Optionally purchased Harness is almost identical to the OEM Harness that originally came with the vehicle, and was a waste of money for a Harness that will not be used.
And to begin with, the Harness on the Engine side does not match the Harness for the CUB purchased with the Option.
I went all the way to this Engine. Harness for CUB What an Option if it is available! Harnesses the Wiring process to fit this Engine. The Harness side is the OEM standard Wiring & Connector, but the Engine side has a completely different Wiring process.
OptionHarness was never used at all because the Engine side Wiring process & processing had to be done.
Forced to think Positively No Cells. It may be good when installing in a CUB, but my CUB was with Cell motor, so it was a complete waste of Gold (of course, at the time of purchase, there is no mention of harnesses to make a Cell-less unit Cell-compatible).
Everything. Universal Type. So, in the CUB system, with the attached carburetor & intake manifold. OEM style." I can't get around the (is it Large sturdy if it's a MONKEY?). (Would MONKEY be Large sturdy?).
Other items that would be helpful
Point and hang of installation
The level of difficulty will increase unless you are able to see and understand the wiring diagram.
[Availability and clarity of the Instruction Manual
An Engine Wiring Diagram for Tanaka Shokai is included in the package, but it is not sufficient, so a Wiring Diagram for the vehicle you wish to install is also required.
Setting may not fit in a pontoon, and this is a product for those who can enjoy and adjust it.
[Notes]
Please check the introduction & description section of the product carefully.
I was fortunate to have a friend who was good at electrical systems, so I asked him to do the Wiring process (a whole lot of work).
If you are a beginner or not good at electrical stuff, as I am. "Decent friend." It may be better to rely on a professional or paid PRO.
[ITEMS TO BUY TOGETHER
If you want an OEM look. SUPER CUB90 If you want to create a custom look and feel, you should buy custom parts to go with it.
[Opinions and requests to Manufacturer
Even though it is an overseas product, it is very nice to be able to purchase Complete engine at this price.
In addition to the engine, the Honda Horizon TypeEngine vehicles have a wide selection of parts at reasonable prices.
View detail
Fits: HONDA Shirley., HONDA dachshund, HONDA monkey, HONDA monkey
Easy installation!
By lowering the Front Fender, it looks more Drill and also reduces the mud splash to the Engine. In addition, it also strengthens the delicate front fork of MONKEY! The only drawback is the silver-colored material.:Since it is made of aluminum, it looks like it has been customized in a MachineMachine way, so there may be different tastes. View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
It wasn't just about looks!
I thought it was just custom parts for looks.
MONKEY50 when straddled.
Because of its small size, the distance between the body and the headlight is very close.
The light reflected off the helmet's shield and was difficult to see, but after installing Visor, the reflected light seems to have decreased.
The construction is slender, but once installed and secured, there is no problem.
View detail
Fits: HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed.
Personally satisfied
I purchased Red.
Installed on a 2007 MONKEY.
As other people have mentioned in their IMPRESSIONS, it cannot be installed without modification.
Use a sander or File to remove the areas shown in the photo.
If you are buying on the premise of processing, I think the cosmetics are quite good.
It is highly recommended for those who do not want to disrupt the OEM Style!
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
I put it on a 75cc GORILLA.
I put it on a 6VGORILLA that I bore up to 75cc.
The Fuel Cock had rotted out of the OEM and had been replaced with an external one.
Change the two Bolts on the Head side to M6 25mm.
I just replaced the Accelerator Wire for Big carburetor and it arrived as is.
Power Filter is KITACO's 35-pipe
I took it apart and reassembled it as it was and tightened the ThrowScrew a little.
When I took it apart again after running it for a bit, I found iron powder in the float chamber.
I just cleaned and assembled it and it is running well.
The Choke Lever is now on the Exhaust System side, and it is difficult to touch.
Other than that, I have no complaints.
View detail
Fits: Others Vehicles with 12vCDI ignition single-cylinder engine, HONDA MONKEY, HONDA GORILLA, HONDA LITTLE CUB, HONDA XR50R, HONDA CRF50F, HONDA Monkey Baja, HONDA DAX, HONDA MAGNA50
Starting and Idling are OK, now it's time to observe the durability.
Purchased because of problems with starting and Idling.
After installation, the above two points were immediately resolved.
The installation method is easy to find on the Net, so no problem.
No instruction manual.
1.Remove the leg shield
2.Remove the Right Side Cover, and then remove the Battery Cover and Earth?
3.Remove the Left Side Cover and remove the nut where the IgnitionCoil is fixed.
4.Replace IgnitionCoil
5.Remove the plug cap and thread the cord through.
6.Return Battery coverretc.
7.Turn in the plug cap and insert it into the plug.
8.Return the leg shield.
Now it's time to observe the progress of durability.
I'm a little concerned because of the low price, but ….
View detail