Reviews
Fits: HONDA little cub, HONDA Super Cub 50, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
Don't expect quality.
I had a headlight unit from another company attached to my LITTLE CUB, but after more than 10 years of use, the plating was peeling, so I replaced it.
The installation itself was not a problem, but the Socket does not seem to be durable.
I installed it at the end of September 2023 and from the beginning of December 2023 the Headlight started flickering occasionally and a few days later the Headlight disappeared while driving and became completely unusable.
I suspected that the Valve was out of ballast and tried to remove it, but for some reason it would not come off. When I pulled it out by forcibly turning it with pliers, I found that the Socket had melted. The melted valve had lost contact with the valve, and the resin was further burnt.
Since the price is reasonable, I think it would be better to use OEM products like Large for Socket and Valve, with Socket and Valve as extras.
View detail
Fits: Others Universal
Broke after 3 months.
AF05E with AF35carburetor installed
Cover part is Material:Plastic, and I noticed that the Bolt was cracked from where it was stuck.
Fortunately, even if this part breaks, it is sucked in via Filter, so we have no choice but to use it as a normal Powerful!
View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
When installing on a CUB, be careful of the compatibility with the vehicle body.
I bought it after confirming that the OEM changefootpeg does not interfere with it, but the change shaft is longer than OEM, so I could not install it.
I feel that this is a kind of fraud because the answer to my inquiry before purchase assured me that it could be installed, but after purchase, the answer was given as reference information.
Regarding the quality, there are dents on the edge of the opening at the top of the cylinder, and it is assumed that there is a risk of blowing in the future.
Note that the Cell is mounted on the underside like the GiornoCUB, so the parts around the generator are not compatible.
OEM Product is available for CUB90 intake manifold, muffler, and rear brake pedal.
View detail
Fits: HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund
Color diameter does not match ST70 ….
I am Restore DAX (ST70) and bought a beautiful Axle Shaft.
The texture is a little disappointing, but I don't think it is a problem at all for practical use.
However, one thing that was not so good was that the diameter of the collar was too small. The Brake Side was fine, but the Sprocket Side could not be used because the collar diameter was too small for the seal into which the collar was to be inserted.
Perhaps a different year DAX Seal is needed?
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
8" wheel with poor finishing
After buying Kitaco, G-Craft and Takegawa rims, this Tanaka Trading rim was not good. The picture shows it highly polished but it is not at all. In fact it is nothing but rough scratches all over it, not buffed at all. I will need to sand it with 600 grit, then 800 grit, then a buffer with compounds. You get what you pay for so if you buy a cheap rim dont be shocked when its not very good. I will buy Kitaco and G-Craft rims from now on. View detail
Fits: HONDA MONKEY, HONDA dachshund, HONDA Dax 70
Handlebars that need lot of work to fit
I bought these for a 1968 z50 restoration, since I had a hard time finding OEM ones. The good: - they are handlebars The bad: - the throttle cuts are very rough and need to be sanded - there is a seam that needs to be removed before you can install the throttle cable holder - standard honda brake levers don't work since the mounts are 2mm wider than stock I would not recommend these. View detail
Fits: HONDA Ape Type D, HONDA Ape 100, HONDA Ape 100 Type D, HONDA Ape 50, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 100 Type D, HONDA Ape 50
Difficult to install if the product is wide enough
I could not install it due to the width of the product.
I cracked it.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
It was damaged after 8 months of use at 4000 km Meter.
I purchased it because it was less expensive than OEM Parts, and installed it. However, the gold material at the contact point with Valve melted, and I could not use it after 8 months. The cause is unknown, so I will purchase again. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA Shirley 50., HONDA cub, HONDA Dax 70, HONDA Shirley 70, HONDA Mighty Ducks (ST90), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA Shirley 50., HONDA cub, HONDA Dax 70, HONDA Shirley 70, HONDA Mighty Ducks (ST90)
Not accurate in Aluminum.
Aluminum, softer than OEM, but not accurate enough to go into Smooth.
I haven't used it since I licked it once.
Drain bolt is mentally OEM equivalent is good.
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape 100, HONDA Ape 50, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA Ape 100, HONDA Ape 50, HONDA Ape Type D
Processing essential
I installed this on an APE 100Typed. I bought a HeatCutter and modified it so that I could install it. It is not difficult, but the finish is very subtle. View detail
Fits: HONDA MONKEY, HONDA DAX70, HONDA ST90 (ST90), HONDA DAX, Others
I bought it to use for my DT250M.
I have not had any particular problems until now, but when the engine is turned on, the voltage is high and rises to about 8V-9V. I bought a used regulator, but it was still the same as the one that came with the car from the beginning, so I bought a 6V Universal Product regulator.
I installed it, but it was no different from the one that came with it from the beginning. In fact, when I turned off the Headlight, the voltage increased so much that the Tester's 10 VRange was at the limit of its swing.
In the end, we reverted to the OEM that came with the product from the beginning.
The price is cheap, and this kind of product may be hit or miss. It may just be that the product I purchased this time happened to be bad, so I do not deny everything.
View detail
Fits: HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA cub, HONDA dachshund, HONDA monkey
KICK was saved, though.
It is true that the Kick pedal of Offset made the Kick start easy. However, the opening and closing part of the pedal is not well made, and it is loose. It shakes and wobbles and becomes a hindrance. If the size is made to match exactly, there is no problem, but it is loose. I would like to have a more accurate one. View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50, HONDA monkey, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50, HONDA monkey
Wiring's Crimp is too sweet.
The quality of the wiring is so good that it looks like it is about to be ripped off. Even if it is this price, this quality is terrible indeed.
On the contrary, if you can fix it by yourself, it may be suitable for those who need a cheap Tail Lamp anyway.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It's a shame because I had high hopes for you.
When I tried to install the meter suppressor spring, one of the welds came off... View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chinese as expected
The mounting bracket is distorted and cannot be installed as it is.
You will have to bend the Bracket or widen the hole to force the installation.
View detail
Chinese Tank
This is one of the few Chinese Tanks that can use 5LOEMCap.
Tank cap (Garbage), Cook and Spacer are included, and you need to be careful not to damage the screw holes on the frame.
Please note that the Tank surface is bumpy and the paint is crap and cannot be used as is.
View detail
Inaccurate installation and explosive noise
First of all, the hole accuracy of Flange was not good and it was impossible to install without machining.
Because it did not come off with the part Single Body even if it expanded the hole, it corresponded by forcibly putting it in the vice and expanding the hole with the Drill of 8mm.
The band of Silencer is too small or the bolt is too short, and it cannot be fixed with the bolt easily.
This was also installed with a lot of sweat by re-bending and pinching with Vise pliers.
The spring that connects the Silencer to the exhaust pipe is too strong and requires a lot of force even with a special tool.
There was a spring for the exhaust system that was a little bit long, so I used it.
When I run the Engine, the Idling state is fat and good sound, but when I start running, the sound is cracked and explosive.
They told me not to come home, so I put it back.
The sound is different for everyone, but the accuracy of the installation is quite poor.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
1/2 ratio
I used it on my '88 GORILLA.
The Swing Arm is SHIFTUP 16Long and the suspension is for 350SS.
I'm very happy with it.
When I saw the center distortion of the wheel before installing the tire, it was not so bad for the rear wheel, but the center was a little off for the front wheel.
Next, when I installed the tire and put in the air, I felt anxious about whether the BEET of Tubeless would work properly, but when I put in the air from Compressor, the BEET went up properly, so I was saved.
I think that the feeling that I ran is not too different because the running fee Ring is amateur, but the appearance when I parked it became very good and pleasant.
I'm sure you'll be able to find a lot of people who are interested in this type of product. Is it still impossible?
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Does it work? Better than not wearing it?
[How is it used?
From daily driving to touring, etc.
Was the one you received as per Image?
As per Image, the texture isn't bad (almost invisible after installation)
Was the installation difficult?
It's easy if you know the steps, and it's easy if you can adjust the chain tension.
How was your experience with it?
"You'll be able to ScauperScauper and Change. But unfortunately, I didn't feel any effect.
Maybe I'm being insensitive, but...
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I didn't feel the effect, I think Clutch adjustment or Oil change is more effective.
Point and hang of installation
First remove the 6 Footpeg Mounting Bolts, then move the footpeg and Side Stand to the rear to make room for the Change Pedal removal.
[With or without Instruction Manual
There is not, so you can look it up on YouTube etc.
[Musings]
Quantity:I think it's not rigid enough because it's fixed with 2pc long bolt.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
reasonable
It's made of plastic, so I thought it would be about the same.
It is easy to drill holes.
View detail