Reviews
Fits: Others Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
Fits: Others Universal
Broke after 3 months.
AF05E with AF35carburetor installed
Cover part is Material:Plastic, and I noticed that the Bolt was cracked from where it was stuck.
Fortunately, even if this part breaks, it is sucked in via Filter, so we have no choice but to use it as a normal Powerful!
View detail
It does not fit into the other 250 models.
I purchased this for use with Blinker relay, but it does not fit into Relay's Connector.
The shape is 250 type, but it does not stick to Male terminal because the direction of the terminal is 180° opposite to Connector.
It has no use as a Connector.
This ConnectorSingle Body can be used as a Harness, but I don't think that is what a Connector is.
View detail
Touch of Lever has improved.
The NORMAL fork and wheel may be a little too much, but it is much easier to maneuver and touch.
Also, the drum-like part that goes into the lever on the wheel side was not thick enough to fit, so I had to use the previous part to make it fit.
I think I ordered what I saw because it was my first time using the site and I wanted to be sure to check it carefully next time.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB70
Dear CUB riders
The CUB has a light bulb that often breaks due to vibration.
This is the fate of a single cylinder engine without a balancer.
This is especially true for vehicles that have been bored up.
I think it's one thing to ask a motorcycle shop to do it, but it's easy to replace the bulb in the CUB, so by all means, keep it in reserve.
I Quantity feel the hassle of buying every single bulb.:I bought it in Set.
This is a complete set, so it's really convenient.
It's cheaper than buying from Single Item.
View detail
Will it be useful?
I bought it to put the Engine with Clutch on my CHALY
The Clutch lever does not have the necessary Clutch Cable length adjustment screw Hmm How do I fine-tune it? Maybe it's exclusive to some model of car?
Don't buy it if it's for Universal purposes
View detail
Fits: HONDA monkey, HONDA monkey
They're allowed to do that because they're Chinese
Even though the picture of the order shows the Rubber's ribs on it
It wasn't attached to the one I received
It won't be allowed to be cheap
Do you think they'll trade you?
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90
For CUB ...
I put it on CUB 90, but it is normal and it is normal without permission.
If you do not do Clear blinker, you do not need Orange balls ...
Rather, I wonder if there is an ordinary ball of VERSION.
I have a ball I did not use as Spare.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA SUPER CUB70
It arrived quickly. Purchase with CUB 90 reserve
I have not used it yet, but I think Cospa is good.
It is put in the Rear box with entering PetitPetitVinyl as it is sent.
Reliable feeling increased.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I used it 12 Bolt
It is good to have been cheaper than other companies.
Packing is also reasonable.
Do not you sell Rose? If you think of bulb out, please do also sell bulk!
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 70
You can save time and effort
After four balls in the box of Blinker Bulb I was wrapped in PetitPetit at Rose and entered the Vinyl bag and arrived.
We devised everything in the box and put it in a Vinyl bag and carry it around.
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 70
Tanaka Shokai Light Bulb Set
Tanaka Shokai Light Bulb Set
Since it is troublesome to align the bulb with Rose, 6VSUPER CUB is set to 12VSpec. It is a Recommendation to purchase at the same time when.
Since Tail Bulb is a Large Yu Type, people exchanging with Small Type Tail lamp such as Billet type are not allowed because it may not enter.
View detail
Fits: HONDA MONKEY, HONDA Shirley 50., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shirley 70, HONDA dachshund, HONDA Dax 70, HONDA Mighty Ducks (ST90), その他
I got to do ChicaChica...
After installation, I was on the commuters several times.
In the town there was not much difference from Valve that I was wearing earlier, but in the country road in the evening it was much more comfortable than the former Valve being much brighter...
While I finished work the other day when I came home, Asplalt suddenly disappeared when I ran about 20 m after passing through the place where Asphalt was screeching Large.
Initially I thought that the light switch had run out I tried hand thought but when I think about it well, the Motorcycle on board is APE - - - There was no light switch..
There was no choice but to drive about 2 km from there without light, this time lights on a place where there is not any step.
Although I was coming home to my home comfortably wondering if it was a poor contact, Headlight was not on the next morning when I looked at Engine..
Since work was a day off, I removed Headlight and I checked Harness while taking hands of acquaintances familiar with Motorcycle but Harness had no problems and was in proper conduction.
Headlight Bulb did not have any problem at all, but when you shake it sounds like gush - - -.
Take the corner of the terminal surface and evenly touch the contact surface etc. I tried installing after reworking but it still can not stick - - - - -
I thought that it might have been excessively sharpened, and when I got a sticky surface on Solder, it got to light properly, so the mystery is deepening.
Perhaps it is a bad compatibility with APE..
View detail
Fits: HONDA MONKEY, HONDA Shirley 50., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shirley 70, HONDA dachshund, HONDA Dax 70, HONDA Mighty Ducks (ST90), その他
The price is also cheap and can be used without problems - - -.
It became hot in the summer as well, and I used it for APE's Headlight riding as a commuter's foot from the rainy season. (` - ∀ - ')
In the past, when Headlight Bulb attached at the time of purchasing a vehicle got white at night it was dark and I could hardly see it, so I replaced it with PIAA's Headlight Bulb and used it, but if the lifespan came out I have it.
So I had to replace it with Headlight Bulb which I had no choice but to ride for a while, but because of the convenience of the time of work, there are many things to use at night, so I can not run a nocturne in peace too darkly (' - Ω - `)
I was worried whether to use PIAA's Headlight this time, but it is not a special brightness but rather a bit brighter than the OEMHeadlight Bulb of SUPER CUB 50 - - -. Life was also long so long, so this time we replaced it with Cheap Headlight Bulb and compared with PIAA - I decided to see the situation (* - ∀ - )
The first thing to look at the delivered item is that the packaging is quite suitable - - - In that respect, like Bullet TerminalCover packing Nylon 's bag is wrapped in a PetitPetit of sorry degree and stopped with a paper lid and Stapler to some extent, as soon as heavy things ride in, it seems likely to crack It was packaging..
Well this price is something like this - - - And when I opened the seal and took Valve out, I saw dirt and scratches on the Glass side that would have been in the process on the way from the beginning.
Valve's internal state was too poor at the same level as Blinker bulb, which is about OEM-style Blinker extras of Chinese made, so it was uneasy as to whether it can be used without problems ( - - ;)
Also, the side of the terminal side also looks like Burn, the terminal Quantity : Pair (for Left and Right) There was also Rose of - - -.
For the time being, I thought about trying on it and replacing it with the Valve that I've had until now. / Although both Hi were lit up without problems, it became unstable as it sticks or disappears for some reason.
By any chance - - - ? Think of the terminal surface with File and Quantity : Pair (for Left and Right) Hitoshi etc. In accordance with the height, even if you are speeding up it will come on without problem.
Brightness is the same as OEM. It was about no difference, so I think that it was good to change.
I would like to make this evaluation because processing was necessary for most installation.
View detail