Reviews
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
CHALY That!
CHALY I bought it to make a thicker footprint of the I am satisfied with the cheap price. View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA CHALY 70, HONDA DAX70, HONDA MONKEY, HONDA CHALY 50, HONDA CHALY 70
Recommended!
It seems a little stiff.
It's extra because it's flat….
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Comparable to OEM Products
[How is it used?
OEM Product was damaged.
Was the one you received as per Image?
The workmanship is so good that it is indistinguishable from OEM Product
Was the installation difficult?
It was easy to replace with one Spanner.
How was your experience with it?
Comparable to OEM Products
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Shirley., HONDA dachshund, HONDA monkey, HONDA monkey
Easy installation!
By lowering the Front Fender, it looks more Drill and also reduces the mud splash to the Engine. In addition, it also strengthens the delicate front fork of MONKEY! The only drawback is the silver-colored material.:Since it is made of aluminum, it looks like it has been customized in a MachineMachine way, so there may be different tastes. View detail
Fits: HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed.
Personally satisfied
I purchased Red.
Installed on a 2007 MONKEY.
As other people have mentioned in their IMPRESSIONS, it cannot be installed without modification.
Use a sander or File to remove the areas shown in the photo.
If you are buying on the premise of processing, I think the cosmetics are quite good.
It is highly recommended for those who do not want to disrupt the OEM Style!
View detail
Fits: HONDA Dax 70, HONDA dachshund, HONDA Shirley 70
This is a must for CHALY.
This is a must have if you are going to Tandem on a CHALY. It is easy to install and although it is not OEM, it is very similar and seems to be durable. Reasonable price. View detail
Fits: HONDA XR100 Motard, HONDA dachshund, HONDA Dax 70, HONDA Ape 50, HONDA dachshund, HONDA Ape 100, HONDA Dax 70, HONDA Ape Type D, HONDA Mighty Ducks (ST90), HONDA Ape 100 Type D, HONDA Ape 50, HONDA dachshund, HONDA Ape 100, HONDA Dax 70, HONDA Ape Type D, HONDA Mighty Ducks (ST90), HONDA Ape 100 Type D
NTN Bearing
About quality and texture NTN always has the quality to trust and buy About the feeling of use It's not used yet. I had to buy two, but I only bought one Products to buy together rubber hammer Difficulty of installation difficult, hard Cost performance and comparison with other products It is the cheapest and has a reliable quality About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I did two in quantity, but I couldn't check the quantity because I was purchasing other products first I should buy it again when I buy other products Since it is an old bike that is 10 years old, there are many things to be done, so it is the most important part of it, and the quality of it is also reliable View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Although the goods are sold also from other shops, a price considers being set up at a low price by it.
Although the goods are sold also from other shops, a price considers being set up at a low price by it. View detail
Fits: HONDA CHALY 70, HONDA DAX70, HONDA CHALY 50, HONDA DAX
Perfect fit
Look and feel a bit cheap the chrome isn't great but the fit perfect haven't put the bike back together yet so can't say what the ride will be like View detail
Fits: HONDA MONKEY, HONDA monkey, その他 Tanaka Shokai Normal Type Stem for 5L, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
4LMONKEYStyle is so cool!
I disliked 5LMONKEY's Fork Dust Boots, so I bought them during Restore.
There is no Installation Manual, and I thought I could change the color later.:Pair (for Left and Right) Disassemble the Suspension twice.
Did 。 The Hexagonal Screw that holds the Bracket is sticking out from the color and looks not so good.
I don't think it's a good idea. I'm not sure if this is a good thing or not, but the gap between the ForkCase and the collar is quite large.
I think there is a lot of stuff in there.
The style is 4LMONKEYStyle as I expected and I am satisfied with it.
View detail
Fits: HONDA CHALY 70, HONDA DAX70, HONDA CHALY 50, HONDA DAX
Since there is no OEM Product
Since OEM Product is not available, I tried to Challenge this.
It looks fine, but I want to see how long I can use it.
That's a price I can afford to buy and replace if it goes bad!
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
A simple installation Instruction Manual is included.
I drilled a hole on the opposite side of the original hole in the bracket of the brake switch, and changed the bolt where the spring of the brake switch would be applied. Spring of the switch and the return spring of the brake pedal can be applied together. (Spring has been replaced by Spring used for Muffler silencer) The instruction manual doesn't write about it at all, and the LINK of Shift was removed from the original assembly, and it was made opposite. There was a diagram of the sample in the instruction manual, but because it was troublesome to make a hole, I cut it to the shape of V according to the shape of Rear Sets. In my car, Shift side interfered with Swing Arm, so I put Spacer. The position is very good, that is the key. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I wanted this +5mm.
If you wear a MONKEY Swingarm Bush, the Bolt is just a little bit shorter.
It sticks well because it's 5mm longer than OEM.
I would be more than happy if the Bolt head was 14mm wide on two sides.
View detail
Fits: HONDA MAGNA50, HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA JAZZ, HONDA DAX70
Aluminum brake pedal
I installed it on SUPER CUB90 with Brake Adapter. How about installing it with a sense of fun? View detail
Fits: その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey
There is a problem with accuracy.
The Guide of the rear wheel of the Arm is not accurate, and I shaved a few millimeters with File, and it finally went in. It can be evaluated in the meaning that it is a valuable article that can maintain a normal look at a low price. View detail
Fits: HONDA MAGNA50, HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA JAZZ, HONDA DAX70
Brake pedal cover
I installed it on my SUPER CUB, it has Accent. View detail
Fits: HONDA MONKEY, HONDA GORILLA
Cospa best
It looks and feels better than I expected for the price, and the Chain is available in Gold, which is a good cosmetic choice. One thing I would like to notice is that the Brakes lot interferes with the suspension installation, so it would be better if it was bent to have a little bit of clearance. Also, I think you need Spacer when you install OEM Wheel because Swing Arm is too wide. By the way, I installed 4mm. View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
DAX70.
I wanted to get a matching wheel other than Silver.
It's like a semi-gloss black.
Just because it's Chinese didn't mean that the holes in the Bolt didn't fit, lol.
View detail
Fits: HONDA Grom(Grom)
Upgrading Gloom
I traded my Swing Arm for a relative's borrowed grommet as a thank you for borrowing it!
I didn't expect it to be quite as cheap as the price, but it has an atmosphere that doesn't rival high-end MODEL, such as the texture of the extruded material, the quality of the welds, and the construction of the end sections.
I looked at the pivot part, the Axle Shaft area, the suspension catching part, and many other details.
I was satisfied with how well it was made in Miniature's own way.
The finish of the pivot shaft (is it a Plating kind of thing?) is a bit cheap-looking, but I'm sorry.
Anyway, it's a great cosmetic product and the upgrading feel from the OEM is great.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
To the DAX.
This is used for the DAX during Restore.
Black is semi-glossy.
It's not Black Anodized because the price is so low.
I think common sense would tell you that.
View detail