Reviews
Fits: HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund
Color diameter does not match ST70 ….
I am Restore DAX (ST70) and bought a beautiful Axle Shaft.
The texture is a little disappointing, but I don't think it is a problem at all for practical use.
However, one thing that was not so good was that the diameter of the collar was too small. The Brake Side was fine, but the Sprocket Side could not be used because the collar diameter was too small for the seal into which the collar was to be inserted.
Perhaps a different year DAX Seal is needed?
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
8" wheel with poor finishing
After buying Kitaco, G-Craft and Takegawa rims, this Tanaka Trading rim was not good. The picture shows it highly polished but it is not at all. In fact it is nothing but rough scratches all over it, not buffed at all. I will need to sand it with 600 grit, then 800 grit, then a buffer with compounds. You get what you pay for so if you buy a cheap rim dont be shocked when its not very good. I will buy Kitaco and G-Craft rims from now on. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
1/2 ratio
I used it on my '88 GORILLA.
The Swing Arm is SHIFTUP 16Long and the suspension is for 350SS.
I'm very happy with it.
When I saw the center distortion of the wheel before installing the tire, it was not so bad for the rear wheel, but the center was a little off for the front wheel.
Next, when I installed the tire and put in the air, I felt anxious about whether the BEET of Tubeless would work properly, but when I put in the air from Compressor, the BEET went up properly, so I was saved.
I think that the feeling that I ran is not too different because the running fee Ring is amateur, but the appearance when I parked it became very good and pleasant.
I'm sure you'll be able to find a lot of people who are interested in this type of product. Is it still impossible?
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Does it work? Better than not wearing it?
[How is it used?
From daily driving to touring, etc.
Was the one you received as per Image?
As per Image, the texture isn't bad (almost invisible after installation)
Was the installation difficult?
It's easy if you know the steps, and it's easy if you can adjust the chain tension.
How was your experience with it?
"You'll be able to ScauperScauper and Change. But unfortunately, I didn't feel any effect.
Maybe I'm being insensitive, but...
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I didn't feel the effect, I think Clutch adjustment or Oil change is more effective.
Point and hang of installation
First remove the 6 Footpeg Mounting Bolts, then move the footpeg and Side Stand to the rear to make room for the Change Pedal removal.
[With or without Instruction Manual
There is not, so you can look it up on YouTube etc.
[Musings]
Quantity:I think it's not rigid enough because it's fixed with 2pc long bolt.
View detail
Fits: HONDA Dax 70, HONDA cub, HONDA monkey, HONDA dachshund, HONDA Mighty Ducks (ST90)
Does not match.
The lever is structurally different from the photo posted in the store. Due to the incorrect connection, the lip rests against the engine housing and it is not possible to change gears. Also, the workmanship of the part is low - there are untreated weld marks. I do not recommend buying. View detail
so-so
I didn't have high expectations because it was made overseas, but the grinding was rough. (Lol)
I'll forgive it for being cheap, but it didn't look like it was new. I washed it after I opened the box. (Lol)
View detail
It's indescribable.
Front fork by Tanaka Shokai, which Owner seems to have worn this time. for MONKEYΦ26Front fork Left SideDisc brake kit 480mm
Item Number : ca0103
I bought it because I thought I could wear it on my own, but there is no Instruction Manual, and the top and bottom quantities:Pair (for Left and Right) I did not understand the direction and tried to put on the Stabilizer appropriately, but Front FenderRear hits Tire and cannot be used as it is.
Also, if you look back at the picture, you can see that the Fender mounting hole is forward and the Axle position of the Front fork is not under the outer but under the rear.
You'll have to think about how to attach it with Bracketetc.
View detail
Fits: その他 , HONDA Dax 70, HONDA Dax 70, HONDA dachshund, HONDA K2, HONDA TRAIL 70, etc., HONDA Mighty Ducks (ST90), HONDA Dax 70, HONDA dachshund, HONDA K2, HONDA TRAIL 70, etc., HONDA Mighty Ducks (ST90)
I can't talk about it
It cannot be used as an alternative to NORMAL OEM at all
Hard! It doesn't work under normal use, it's a rigid state
If he weighs more than 150?
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Overall accuracy is not good.
1 :
The precision of Spring holder is poor, Quantity : Pair (for Left and Right) Medium, 1 pc on the bottom side could not be used.
We are using build-ups of Aluminum Putty.
2 :
When combining with OEMStem, it is necessary to replace the internal circlip with OEM Product. Size is different.
3 :
The Piston Slide pipe was brittle, and it cracked only by the shock hitting Pin.
Since Repair purchased goods had no problem, I think that it is a problem of individual accuracy.
4 :
The sitting of Fork Spring was bad and it was necessary to fix the seat.
5 :
Each part BALI majority. Working with bare hands will cut your finger.
that's all. I think this part is for people who can fix it with time and labor.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
This product is of average quality. I did not end up using these forks as I did not trust the quality of the material and the quality of the welds.
This product is of average quality. I did not end up using these forks as I did not trust the quality of the material and the quality of the welds. View detail