Reviews
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
ca1374
We need to retrofit my friend's SUPER CUB CUSTOM with the necessary spare parts that will positively affect the operation of the equipment over time. One of the main things is to protect the internal parts of the engine from small chips (which are formed during engine operation). This plug is the optimal solution to this issue. View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
ca1374
My friend found out that I have bolts with a magnet on all my equipment to collect chips from the engine cavity. He asked to buy this bolt for him on a HONDA SOLO, too. Upon arrival, he handled the installation himself and he really liked the quality of the material!!! View detail
Required for disassembly work
It would be nice to have when doing overhaul.
I have searched and found that many people reuse the Crankcase gasket, but I think it is better to smooth the Crankcase gasket with oil stone and replace the gasket to prevent oil leakage.
I studied the initial overhaul with New Engine.
View detail
Fits: HONDA MONKEY/GORILLA, DAX, CHALY, CUBetc. vehicles equipped with Horizontal TypeEngine, HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA CUB
This is faster and quicker than a poorly designed Engine.
I bought this once because the Engine I put together myself was sluggish no matter what I did.
I was wary of the Chinese Engine or ……, but it worked on the PON without any problems.
I don't know about durability etc. yet, but I didn't have any difficulties except for the wiring process on the car body side.
CUBOEM's SeesawShift Pedal can also be used normally.
However, as mentioned earlier, if the supplied Harness is not used, it is necessary to modify the generator/StarterWiring on the car body side to Bullet Terminal.
Especially with Cell motor Harness, you should buy a Bullet Terminal that is compatible with thicker Cable because you need to process the thicker Wiring for Starter on the Grounding Wire.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Great oil gauge
Help add to the final look of your motor with this machined oil dip stick. same length as the stock 50cc but adds a little bit of class to the overall look of the engine View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Used in CUB110.
Installed at the time of oil change and also installed with bore up and it catches surprisingly well. View detail
Fits: HONDA monkey, HONDA For Honda horizontal engines, HONDA For Honda horizontal engines
Head Breather Port
Machining is well done, if you dont need it to breathe, it comes with a blanking plug to block off the port. the barb on the banjo fitting is 8mm View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Aluminum will break someday.
Material:I think Aluminum will break someday.
Aluminum will crush the corners of the Bolt even with the proper Torque from the first time.
Hard Material such as iron is good.
In the first place, there is no such thing as Aluminum in OEM, so that proves it.
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
TANAKA TRADING Large Magnet Drain Bolt
The quality of workmanship and material is very pleased. I took it as a gift for a Chinese moped. Everything went well, there was no doubt about it. I liked these bolts the most of all that I have ever used. If nothing changes, I'll take more. -------------------------------------------------- -------- The quality of manufacture and material was very pleased. I took as a gift for Chinese moped. Everything came up, which did not have to doubt. These bolts liked the most of all that it was used. If nothing changes, I'll take it again. Powered by Google Translator View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
You can see the iron powder on the Oil replacement.
You can buy peace of mind for a small Gold amount. It will help you to have a long-lasting relationship with your car. View detail
Cospa strongest
If you want OEMs to Bore up
It's faster to buy w
Packing and Gasket replaced with FOR JAPAN MODEL
Compared to domestic products, the vibration is great w
GEAR was reluctant to come in, but that will change depending on the oil.
We recommend Motul 5100.
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Magnet strong! Safe because it is made of steel
Material:The colorful aluminum drain bolt has a nice parenthesis look, but I decided to go with this one because I thought steel would be safer for tightening the bolt firmly.
Magnet is very strong and high quality.
Is the price a little high? I'm not sure.
Since the car body is old, I am going to ride on Large with particular attention to these small parts.
equipped (with)
2002 AA01 CUB STANDARD50
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Strong magnetic force
Material:We decided to use steel because it is better than Aluminum.
Large sturdy even when tightened as much as possible, and the magnetic force is strong and effective.
Is the price like this?
View detail
Fits: HONDA dachshund, HONDA monkey, HONDA For turnip horizontal engine, HONDA Shari, for horizontal engines, HONDA For turnip horizontal engine, HONDA Shari, for horizontal engines
DAX Kick pedalF
It was rusty rusty so I replaced it with this new Pedal. The product was solid and the plating was very smooth. I am very pleased with the Polished look of the feet as if they were brand new. View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
For Wiring lock.
I bought it because I needed a wiring lock for my Circuit run and it's a great value with Washer! View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
It is inexpensive, but the performance is sufficient.
Installed on a CL50.
Since it was with Magnet, there was quite a bit of iron powder on it when the oil was changed.
It is hard to compare with the normal performance since the Oil was replaced after the Engine overhaul, but I am satisfied with Magnet's performance.
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Bolt with magnet
Just a bolt with a magnet. Suitable for Super Cab Custom - the magnet at the end of this bolt is needed to trap the small iron particles that form when the engine is running. This is a very useful and useful feature! I recommend changing it to everyone. It is inexpensive, but fulfills its function 100%. And it is inexpensive, and the quality is good. -------------------------------------------------- -------- Just a bolt with a magnet. Suitable on the super caster - magnet at the end of this bolt is needed to delay the small iron particles that are formed during the engine operation. This is a very useful and necessary feature! I recommend changing everything. It is inexpensive, but performs its function 100%. And it is stored inexpensive, and the quality is good. View detail
Fits: HONDA ST90 (ST90), HONDA DAX70, HONDA CHALY 70, HONDA CHALY 50, HONDA CUB, HONDA DAX, HONDA MONKEY, HONDA GORILLA
It was divertable to the Demon150GR!
The price of this parts is less than 1,000 yen, so I ordered it with the intention of giving it up as a pillar of humanity even if I can't install it.
The GPX Demon150GR is a motorcycle that has very few parts, so I have been looking around for parts that I can use.
Especially, I couldn't find any Oil cap, and I wondered where the people in the country of smile purchase the parts. However, the screw mountain went in smoothly without a problem, and it was possible to install and remove easily.
The Rubber packing which seems to be the same shape as OEM is also attached to the product, and it seems to prevent the Oil leak etc. firmly.
Demon150GR's OEMOil cap is a Material:Color by Plastic:Because of the gray color, when you look at the car from the side.
I've been wondering why it looks so tacky, but I was finally able to change it to AnodizedParts!
The Red Anodized color is also a beautiful deep color and I like it.
This time, I bought the Red color to match the Red Logo, but since the price is cheap, I am thinking of buying additional Gold color to stand out against the Black body color.
In other words, Demon150GR seems to be good for Oil cap with M20×P2.5, because it seems to be the same shape as HONDA's MONKEYetc.
I know it's only a few, but I hope it helps Demon riders! ("[ ]") "
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
I use it to compare with KITACO's
Half the price compared to KITACO's.
I installed it on my other Bore up CUB and
We are comparing the effects.
The color is good, the texture is good.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA monkey, HONDA monkey
Dress-up effect and heat dissipation effect.
I damaged the cylinder head cover with a tool when I overhauled the engine.
Material to make it look as good as possible.:I bought this one from Aluminum.
good point
Just replace with OEM cylinder head cover.
Lighter than OEM.
Gasket is also included for easy replacement.
■Material:Aluminum is also a good conductor of heat and can be expected to dissipate heat.
It's aluminum, so it's not polished.
A bad point
If you don't need it, you don't need it.
I bought it for the dress-up effect and the appearance, but when I thought about it, there is also a lot of Merit in this part.
I'm glad I bought it personally, because I want my Engine to be clean inside and out.
View detail