Reviews
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
The most cost-effective Engine when pontooned.
Purchased to replace CUB PRESS
The seals were replaced once before the replacement.
Wiring is absolutely necessary, so some knowledge and skill is required, so if you are not confident, leave it to Shop!
not straight forward
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
Carburetor is good; Manifold is problematic. Insufficient product description.
OEM Air Cleaner BOX cannot be installed, because it interferes with the OEM cook. Therefore, you will need a separate Manifold, Air Cleaner, and Throttle Wire, and considering the cost, you can choose another manufacturer's carburetor for the same price. If you consider MONKEY as the applicable car model, I think the explanation is insufficient. 。 The included Manifold has a Large inner diameter and the OEM ports and steps are Large. The OEM bolt is also too short to use. The problem with this product is not the carburetor, but the manifold that comes with it, the throttle wire that does not come with it, and the lack of explanation. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
As Attachment.
It is an ordinary Oil cap.
I like Parenthesis because it's not particularly difficult to use, but it looks like a MachineMachine!
good point
● Form. It is of appearance, but it becomes Accent as if it was also modified to Engine.
The construction is also solid.
Packing can be diverted from OEM's.
This is Attachment rather than Practicality. Having said that, it can be used normally, so it is good to change it for a change.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Billet aluminum oil sensor
Purchased for a Honda Super Cub Custom. It was expected to have a thermometer, but in fact it's just a plug. From the photo it is impossible to understand whether there is a thermometer in it, therefore it looks like a hoax. If you are looking for a thermometer, this product is completely useless. There is a mistake in the description, but in general it looks like a scam. Purchased for a Honda Super Cub Custom. It was expected to have a thermometer, but in fact it's just a plug. From the photo it is impossible to understand whether there is a thermometer in it, therefore it looks like a hoax. If you are looking for a thermometer, this product is completely useless. There is a mistake in the description, but in general it looks like a hoax. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I can use it normally.
DAYTONA's Bore Up Kit (HYPERHead series 88cc) I use it in conjunction with 。 I can use it normally but I am not sure how durable it is. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's up and running, but...
I consulted with a motorcycle shop because my Maguna 50, which is a very beautiful car with 8,000km on the clock, was not running well (cause unknown), and they pointed out that the cause was a bad Tappet, Pilot, Main jet, and CDI. So I changed each jet, replaced the carburetor packing, cleaned Plug and Element, and tried to change CDI by the way, I was looking for CDI, but OEM is expensive, and famous manufacturer (Posh, etc.) Other Brand Product is around 7000yen. And because it cannot be said that it is cheap, I search for a cheap Chinese product though I do not trust it much. The price was about 20% of the other products of 1100 yen in this shop of the MotorcycleParts handling shop which is often seen, and because the Review was also good though only two cases, I bought it at the risk. "Does it apply to MAGNA 50?" I was expecting to be able to install it because I read in the review that it was possible to install it in the same kind of Jazz as MAGNA. The MAGNA50 had a 6Pin and a Pink Wiring, but the product did not. I had no choice but to replace all the other concerned parts and started with one extra Pink wire. As a result, it went well, but I don't know if it was the effect of the CDI or the problem with the other parts. Besides, what worries me now is that I haven't connected the Pink's wire. Is this a good thing as it is, or will it hinder me in some way if I don't? I am very worried in addition to the fact that it is a Chinese product. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
6VGORILLA will be used for
G-Cla-Minimoto has a similar product and I've already experienced the effects.
I bought it this time because it is the cheapest one at
Nut is not attached, so you need to get a long one.
I will add the accuracy after I install it.
View detail
Fits: HONDA MONKEY, HONDA CUB, HONDA DAX, HONDA GORILLA
CoreBody is available.
This is my second purchase. The first one I purchased has no problem except for the Mesh hose that came with it, which I replaced with a commercially available Hose because the finish of the Mesh hose was not good and it was cumbersome to handle.
The thing which was purchased this time tightens Screw of Side cover by hand first, but I felt something caught, but I tried to assemble it for the time being. It is not possible to tighten and loosen. After a while, I tried to tighten the screw because the oil leaked from the side cover, but it was useless. Compared to the OEM side cover, the screw holes are slightly off and the whole thing is distorted, so I had to buy the side cover again. After all, the CoreBody and Bracket are the only ones I can use. It's a shame because the first one I bought is working fine. However, it is still cheaper than the manufacturer's products so you can use it even if it takes some time and effort.
The Engine is CUB series 110cc.
View detail
Fits: HONDA MONKEY, HONDA CUB, HONDA DAX, HONDA GORILLA
Cheap and bastard
Bad point one.
Instruction Manual is not enclosed. Because it is only an oil cooler, it becomes manageable even if it is not used to it.
Bad point 2.
The oil cooler mountings are welded upside down, or the female screws may have The Bolt didn't go in because it was not chopped.
Others
We are still breaking it in, so we haven't run it at full throttle and its performance is unknown.
View detail
Fits: HONDA MONKEY(except FI)etc.Horizontal TypeEngine, HONDA MONKEYetc.Horizontal TypeEngineUniversal
It's well worth the price, but it does require some processing
Hose is hard It's better to get a separate hose
In the case of the BearingCam, it is necessary to scrape off the protruding parts of the ejector If you use it as it is, it is almost certain to leak oil, so you need to prepare a liquid gasket separately It is safe to reassemble the Nipple and then install it
Bottom line, Core was perfectly fine
It can be fixed with a 50mm U-shaped long bolt It's a non-interference, so it's Recommendation
We finally switched to taking out another company..
View detail
Fits: HONDA APE 50
I machined the hole
Quantity of Camshaft Chain Tensioner:The Shaft did not move because the set hole is small I processed and installed it in a hurry, but I am worried about its durability View detail
Fits: HONDA MONKEY(except FI)etc.Horizontal TypeEngine, HONDA MONKEYetc.Horizontal TypeEngineUniversal
It looks nice.
Oil seal and hexagon socket M6 length 2 cm long Screw required
Also, since Nut stopping Camshaft Chain Cover was about 3 mm long, I put Aluminum 5 mm Washer and adjusted it. Perhaps Oil will leak if it is not Aluminum.
Instead of Oil seal.
View detail
Fits: HONDA CHALY 70, HONDA ST90 (ST90), Others , HONDA DAX70, HONDA GORILLA, HONDA CHALY 50, HONDA DAX, HONDA MONKEY
Regret goods
Because I am using Engine tune I use Oil cooler throughout the year, but this time I bought it as a supplementary purpose of MainOil cooler by midsummer Overheat countermeasure.
First of all, since there was no Screw hole for installation, there was no Clearance to establish a Screw hole, so we purchased Bracket for a water pipe at Homsen and installed it somehow.
I also wanted to replace Nipple with another one, but the Screw hole was 12 mm 1. Nipple selling for 25Pitch can not be used and there is no pain in Universal's freedom.
Design and fabrication are beautifully satisfied.
Because it uses it as a sub Oil cooler, the cooling effect is as expected.
View detail