Reviews
Fits: HONDA MONKEY(except FI)etc.Horizontal TypeEngine, HONDA MONKEYetc.Horizontal TypeEngineUniversal
It looks nice.
Oil seal and hexagon socket M6 length 2 cm long Screw required
Also, since Nut stopping Camshaft Chain Cover was about 3 mm long, I put Aluminum 5 mm Washer and adjusted it. Perhaps Oil will leak if it is not Aluminum.
Instead of Oil seal.
View detail
Although it can not be foolish to say even Chinese
Used for SUPER CUBAA 01
I bought it because I wanted to try HandClutch
Used for about 500 km conveniently on the way, farm road, riverbed Main
Because it runs on the snow road or fuel efficiency is very bad
It will only be about 25 km of litter
However, Engine from the bottom tenaciously easy to use Engine
Although it may be Engine per hit
I felt it was not enough to say in the street
Mission is well entered and Neutral is easy to go out
Plugetc. It was transformed into domestic products and the Piston ring was also firmly attached
It was not satisfactory to add carburetor, but it was supposed to be able to run without excess or deficiency
If you want greedy carburetor change or intake mania change ...
No, since it is also good to add, it is somewhat savvy for amateurs because there is less time and effort to find that they are able to purchase conforming items together
View detail
Ha gap has been drawn
Purchased as Exchange Parts for Subs tank for DAX.
Gasoline leaked out of the knob part in about 3 months since Cook that was attached from the beginning.
I tried disassembling before use, but the quality of Rubber seal is poor.
The packing of the Screw part is out of the first from the beginning and Packing of the knob part is bad shape of the hole.
A good place to compare with Minimoto's Cook
- Price is a bit cheap
- Easy disassembly as Screw stop
Is it degree.
Since Minimoto's Cook has never been disassembled, the quality of Rubber seal can not be compared.
However, Body's Reverse side had the same three star Mark as Minimoto made Cook, and I think that there is no difference in the quality between the same Large land products.
ScrewSize : M16*1. 5
View detail
Fits: HONDA MONKEY(except FI)etc.Horizontal TypeEngine, HONDA MONKEYetc.Horizontal TypeEngineUniversal
It is a bad product as the product arrives and surprises it.
First of all Core is in a state of serious condition.
Once checking the flow of Oil flow is too bad - - - Even if I put in the air, I feel that there is a sense of resistance and it becomes considerably resistant at the viscosity Oil.
In use with high rotation Engine there may be a possibility that the circumference of Oil is bad and it will be stuck.
View detail
Fits: HONDA APE 50
It is recommended
The price is also cheap and quality is no problem.
knowledge - A person with experience has no problem.
Since there is no Instruction Manual, I do not recommend it for beginners.
There was no need for processing and reworking.
View detail
Fits: HONDA CHALY 70, HONDA ST90 (ST90), Others , HONDA DAX70, HONDA GORILLA, HONDA CHALY 50, HONDA DAX, HONDA MONKEY
Regret goods
Because I am using Engine tune I use Oil cooler throughout the year, but this time I bought it as a supplementary purpose of MainOil cooler by midsummer Overheat countermeasure.
First of all, since there was no Screw hole for installation, there was no Clearance to establish a Screw hole, so we purchased Bracket for a water pipe at Homsen and installed it somehow.
I also wanted to replace Nipple with another one, but the Screw hole was 12 mm 1. Nipple selling for 25Pitch can not be used and there is no pain in Universal's freedom.
Design and fabrication are beautifully satisfied.
Because it uses it as a sub Oil cooler, the cooling effect is as expected.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA CHALY 70, HONDA CHALY 50
Anyway.
By all means Carburetor setting did not go well, there was an add Vise with? In the ignition system, I bought it as soon as I exchanged Point.
Although it has not installed yet, Plug cap seems to be no problem especially when it is separately required.
I do not think Ignition coil is the cause, but since many obsolete numbers came, something, I will try to refresh once.
View detail
Fits: HONDA Shirley 70, HONDA Shirley 50., HONDA Shirley 70, HONDA Shirley 50.
CHALY a 2 to PC 20
It was for VM 22 and 16, but it is diverted to PC 20 by self-responsibility. Since the Carburetor installation pitch is the same 48 mm as VM type Insulator, Cost performance is also available and we introduced this.
It was a good shopping because Exactly and Carburetor fit in Limit Space of CHALY A and did not interfere anywhere. Of course, OEM Cover is removed. Although the caliber was modest, it was easier to set out on the PC system than the Large caliber as if it was stupid. I think that it is intended for people who can adjust the story with carburetor and Head with the degree of correction.
View detail
125Engine gasket
Most Size of Gasket was different and could not be used. Made in China Originally I did not expect it, but I did not think Gasket would not fit! After all I reused most of the Gasket straw and assembled it. View detail
Simple and easy to installed, just unscrews afew of the case nuts and crews back it again. Nice and beautiful plus eye catchers. Qualities are very details with perfectionist touch.
Simple and easy to installed, just unscrews afew of the case nuts and crews back it again. Nice and beautiful plus eye catchers. Qualities are very details with perfectionist touch. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA CHALY 70, HONDA CHALY 50
Used for CB50S
CB50S that had been sleeping for more than 15 years When exchanging, exchange it for a new item just in case.
OEM Product was purchased because it was not available due to the obsolete number.
It can be used without problems.
View detail
Buying cheap ...
I used it when installing CHALY 's Rear Sets, but the Spline diameter of Kick Shaft is not matched and it gets a glass.. The compatibility with Rear Sets used this time was bad and it interfered with footpeg.
I bought KITACO's Kick pedal again. KITACO 's Kick pedal is the same as OEM Product etc. Without a glance. There is no interference with Rear Sets.
View detail
Buying cheap ...
I used it when installing CHALY 's Rear Sets, but the Spline diameter of Kick Shaft is not matched and it gets a glass. KITACO 's Kick pedal is the same as OEM Product etc. Without a glance. The compatibility with Rear Sets used this time was bad and it interfered with footpeg. View detail
Fits: HONDA Shirley 70, HONDA Shirley 50., HONDA Shirley 70, HONDA Shirley 50.
Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed
Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed View detail
In exchange for a pure negative pressure carburetor, it attaches with a DJEBEL250 XC. an engine Response becomes good from the start of Throttle 開け to a high rotation area -- a Torque -- a ゴリゴリ 30 percent increase -- touch [ about ]. if it says with
In exchange for a pure negative pressure carburetor, it attaches with a DJEBEL250 XC.
an engine Response becomes good from the start of
Throttle 開け to a high rotation area -- a Torque -- a ゴリゴリ 30 percent increase -- touch [ about ].
if it says with the
engine sound -- フォーン [!! ] て感じ from ブブオーン.
Seemingly, about 30 km/L of
fuel consumption are running.
Since there is no long-distance race, it cannot say anything yet.
About the
products, although it is violent structure, operation is a problem pear.
The
instruction manual is a pear.
It is professional-oriented.
initial setting is Main-jet #138, slow #48, and Needle N80F.
In its environment, it was a quite deep eye.
Since it is compatible with
PWK, it is not troubled by Jets.
It sells also at what article store generally.
A cheap output Up, fuel consumption ぼちぼち, and a Black body are the best for making subject at a Cool and curiosity.
he also cannot but obtain
こりゃあ and cannot but buy it!
View detail