Reviews
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
I can use it
Crimp is no problem, but Chain cut is a bit difficult, so let's sander it! View detail
No good
useless
Garbage box
Material has problems and is too soft.
View detail
I think it's cheap, but not cosmetically pleasing.
Maybe it's just something I happened to purchase.
Crimp pin was not very durable, and I could not successfully Crimp from about the 3rd Chain.
If only Crimp pins can be purchased at a discount, this would be fine.
I used to use KTC, but I would have preferred to buy that one, even though it was several times the price.
View detail
Tanaka Shokai Tanaka Show Kai Chain Tool&CrimpTool set
This is the first time I have purchased a ChainCutter&CrimpTool set. New RKBlackChain replaced 。 The tool is easy to use and a very good product! 。 Please try it outRecommendation. View detail
Underpriced TANAKA
I bought it at the same time as the EK520SRX2 and used it to replace the Chain, but I lost the Chain at the Crimp stage and the Rivet Pin was crimped and the Tool itself became useless.
That's a minimum quality product!
Thanks to that, all of our plans for a 4-day weekend are ruined, and we can't afford to lose 4,500 yen! I purchased the Crimp tool separately and am waiting for it to arrive, but I can't ride my motorcycle until then.
I'm most upset with myself for trusting it because I'm dealing with Webike.
I learned that sometimes fraudulent products are sold because it's only a net mail order.
View detail
It's your first time, and that's why you failed.
I bought it when I first replaced Chain.
I think I could have used it a bit more if I used it properly, but it is a good memory that I tightened it so hard that it broke the pin.
View detail
At a minimum [Color] Clear
My lot (Purchased in 2016.) was accompanied by a translation (please enter here Instruction Manual) I was unsure of how to use it, so I checked the Net for examples of its use and referred to many of them I was worried about it, so I checked the Net for examples of its use and referred to many of them as well Also, unlike the photo posted, only the Crimp pin seems to have a different Material It is a silver molding color
The Bolt for extrusion is turned by using the 14mm Socket + Ratchet without using the attached rod I did
For both Cut and Crimp, don't turn it all the way to the end at once, especially Crimp 5 times slowly I worked while repeating the confirmation by dividing it into about 2 parts, and completed without problems In addition, when you apply LargeTorque, there is a sense that the mouth of the Tool opens slightly
Also, the angle of the tool was slightly off when tightening You should check to make sure it's straight, or be persistent while working
I also worked on the part of the chain that was sprocketed to prevent twisting
The quality of the product seems to vary and there are some concerns, but that's the Manufacturer (Seller) We expect the response of the
I didn't expect it to be easy to use as I think it is the cheapest of its kind It does a decent job as a tool and seems to have no problem with repeated use, so I'm happy with it
View detail
sufficient for one's needs
Swing Arm, Suspension and Quantity:Purchased as a set
The chain is pricey in its own right, but it is still very solid I gave it a rating of 5 because I thought its durability would be no problem
View detail
It looks like it
The whole thing is not quenched or soft overall
I didn't use it for Chain cut because the original Chain is Clip type was no problem
However, the pin on the Crimp is too soft and the tip was crushed when I applied force to try to crimp it
As for Crimp, it's useless
Cut a Hexagonal Wrench of the same thickness and put in a round tip Crimped
View detail
Insufficient strength
I used it in 520 Chain
RivetPin for Crimp will bend immediately when used once and it will not be possible to reuse
As Pin remains in Bolt of Base, the entire tool becomes unusable (It will not come off)
It transforms very easily
I think that it is better to purchase others even if it is honest price high
View detail
Garbage
How to use Even if it was used for reasons it was damaged.
Crimp Somehow, the tool bends and breaks
.
Is it for Motorcycle? Level.
No worth buying Waste of money.
Do not sell such things.
View detail
Cut only
Although I could do Chain cut, Crimp could not use the tool lost. It was a loss of cheap buying.. I will repurchase a different Manufacturer item. View detail
The lowest product
It is the lowest product.
Let's use it and see it Big !! It broke easily.
It is like throwing away Gold.
I think how to release such a product.
I bought it and lost it.
View detail
It is a special tool, but both hang and power are necessary
I think that it is necessary to have considerable grip strength to Cut Chain with this tool alone.
As usual, it was cut with Thunder and finally removed with Chain Tool.
For Crimp, we need more experience. Worked while checking the amount of Crimp.
Since I have not used any other expensive CrimpTool, I can not judge the usability but it is a necessity for work at my own risk.
For those who are new to the first time, I think that the Instruction Manual is necessary. It was not attached to the item that I bought.
When searching to write impression this time, it was sold out.
I hope that it will be upgraded and resold.
View detail
I will not buy it anymore.
Instruction Manual is a bit hard to understand.
In the first use Pin for Crimp loses to Pain of Chain and is going down.
Lack of hardness? I will not buy it again.
View detail
Does the product description correspond correctly?
In the product explanation on the Web, the corresponding Size was from 420, but the hole escaping the Pin of the prestool did not match the 428 and could not press the Link Plate. Since it can not be helped M6 Nut Quantity : 2pc. Instead of putting it between Plate and Tool instead of SetSpacer. Even if you look at the instruction manual No description of the method of press-fitting Plate at Chain of Small Size.
Did you misunderstand how to use it? It is unknown whether the product description is wrong.
View detail
I have not used it almost ...
I tried using it for Chain of press-fit Clip type but it was able to be used without problems
I have not done Crimp or Cut
I do not know whether it is durable or easy to do
I think it's a good one
View detail
It is difficult to adjust power
I used it to replace Chain of OEM 428 Size with Chain of 520 Size.
Although it was my first work, since the handling Instruction Manual was written kindly and politely anyway, I could finish my work safely.
First I do the work of cutting the chain I am currently using with the Chain Tool, but it will be pretty exciting whether Pin will not break because Pin is pressed and it starts to move, it is very hard. Once you start to move it you can fasten more quickly.
Next, it is used for press fitting of Plate. Because you have to keep the position so that Plate does not fall off while holding down the press-fitting tool, I want three arms only at this time. In addition, the moment when press-fitting is completed, there is no standard as feeling of the hand turning Wrench, so it is better to move slowly and carefully until you get used to it.
Finally, Pin's Crimp work, but like this Plate press fitting, the feel of the hand is all in the end. Unlike Plate, if Crimp passes, Pin will be damaged, so I removed it many times and confirmed Crimp condition.
I think that you can work on Smooth if you get used to it, but since I do not exchange chains frequently in individual Levels in the first place, I think that it will be a few years later.
It is safe to pay the labor by Motorcycle shop and exchange it, basically it will be enough.
The purpose of purchasing this tool is to improve your own maintenance Kill and gain experience from all over.
In this age of mail-order sales, such selection can be made without ordering to Motorcycle shop. Depending on the location conditions at home, it may be very difficult to bring it to Motorcycle shop after ChainTrouble has happened. Also, if you are going to do long distance touring that is over thousands of kilometers, you will need to carry tools that can cope with sudden Trouble and Kill,.
Because it becomes amateur work, it is all self-responsibility. I succeeded this time, but I think that I missed it. Because failure is the best experience.
By maintaining this way yourself, your attachment to your Motorcycle will also be strengthened.
I would like to touch such a tool if it is a Motorcycle that I want to keep in touch with for a long time.
View detail
Whether it is necessary items
Because I like Non-seal Chain, I purchased it because Chain exchange frequency is also high.
Pin extraction and crimping require a lot of strength. I also install ROD to secure Clamp firmly, but because ROD is thin and somewhat short, I do not get much power. I bought a round bar of wood in Homsen and I use a hole with a hole so that this ROD stick can be inserted.
I strongly recommend power because it also enters firmly, but who thought of this was a good grasp and a strong ??
It is handy with a tool that can be used quite a bit.
Before purchase, I had to scrape Pin with Thunder and removed it, but because Chain with Grease was scattered with scattered whetstone and iron powder, now this tool is indispensable
View detail