Reviews
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
I can use it
Crimp is no problem, but Chain cut is a bit difficult, so let's sander it! View detail
No good
useless
Garbage box
Material has problems and is too soft.
View detail
I think it's cheap, but not cosmetically pleasing.
Maybe it's just something I happened to purchase.
Crimp pin was not very durable, and I could not successfully Crimp from about the 3rd Chain.
If only Crimp pins can be purchased at a discount, this would be fine.
I used to use KTC, but I would have preferred to buy that one, even though it was several times the price.
View detail
Tanaka Shokai Tanaka Show Kai Chain Tool&CrimpTool set
This is the first time I have purchased a ChainCutter&CrimpTool set. New RKBlackChain replaced 。 The tool is easy to use and a very good product! 。 Please try it outRecommendation. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Better than expected.
Used in GORILLA.
It is Chromium Plated on Steel, which is better looking than the pure Black of other Manufactures, and the accuracy does not seem to be bad.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Too cheap, I'm afraid, but...
It will be needed once the NSR50 Wheel is installed.
It is cheap and too inexpensive compared to GCraft and others, but it is Chromoly steel, so it will be Large sturdy. 16T and no Limit interference inside the Crank.
View detail
Underpriced TANAKA
I bought it at the same time as the EK520SRX2 and used it to replace the Chain, but I lost the Chain at the Crimp stage and the Rivet Pin was crimped and the Tool itself became useless.
That's a minimum quality product!
Thanks to that, all of our plans for a 4-day weekend are ruined, and we can't afford to lose 4,500 yen! I purchased the Crimp tool separately and am waiting for it to arrive, but I can't ride my motorcycle until then.
I'm most upset with myself for trusting it because I'm dealing with Webike.
I learned that sometimes fraudulent products are sold because it's only a net mail order.
View detail
It's your first time, and that's why you failed.
I bought it when I first replaced Chain.
I think I could have used it a bit more if I used it properly, but it is a good memory that I tightened it so hard that it broke the pin.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA DAX
Great quality
Made with very good quality metal, fit snug on drive shaft which is what you want, will definitely purchase this item again when/if need another one. View detail
At a minimum [Color] Clear
My lot (Purchased in 2016.) was accompanied by a translation (please enter here Instruction Manual) I was unsure of how to use it, so I checked the Net for examples of its use and referred to many of them I was worried about it, so I checked the Net for examples of its use and referred to many of them as well Also, unlike the photo posted, only the Crimp pin seems to have a different Material It is a silver molding color
The Bolt for extrusion is turned by using the 14mm Socket + Ratchet without using the attached rod I did
For both Cut and Crimp, don't turn it all the way to the end at once, especially Crimp 5 times slowly I worked while repeating the confirmation by dividing it into about 2 parts, and completed without problems In addition, when you apply LargeTorque, there is a sense that the mouth of the Tool opens slightly
Also, the angle of the tool was slightly off when tightening You should check to make sure it's straight, or be persistent while working
I also worked on the part of the chain that was sprocketed to prevent twisting
The quality of the product seems to vary and there are some concerns, but that's the Manufacturer (Seller) We expect the response of the
I didn't expect it to be easy to use as I think it is the cheapest of its kind It does a decent job as a tool and seems to have no problem with repeated use, so I'm happy with it
View detail
sufficient for one's needs
Swing Arm, Suspension and Quantity:Purchased as a set
The chain is pricey in its own right, but it is still very solid I gave it a rating of 5 because I thought its durability would be no problem
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA DAX
The 16T was garbage, but the 15T was usable
I wrote a while ago that this was a problem before Generator cover processing, but the thing itself is not the same with the number of hinges It's like, the last time I wrote this was 16T, and this time I'm going to rate it 15T
As you can see in the pictures of the product, the 15T has a thicker mounting area than the 16T There is almost no rattling at the time of installation and the chain is not likely to come off It works properly
BALI is less and cleaner
But I'm still worried about the durability of the Stopper
It's also heavier than the Standard Type because it's thicker and not as light as the Standard Type And it is quite heavy
Also, 15T did not have gold buckles for some reason When I put on the bolt, the bolt hit the side of the engine
View detail
Fits: HONDA CHALY 70, HONDA DAX70, HONDA CHALY 50, HONDA DAX
sprocket set
the TANAKA TRADING Offset Sprocket (Front & Rear Set) good quality item but it does not fit my bike because i have a difference swingarm View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY, HONDA GORILLA
Problems before Generator cover processing
BALI is there
The plate thread is closer to the shaft than the normal one, so the hole circumference for the plate thread is smaller Thin and poor, seems to distort if you tighten the screws too hard
You cannot use Hexagon Bolt, it is Cap bolt only
Generator cover was interfered with by the lower chain, so I shaved off a little bit around that area
Important
If you use this product as it is, even if you process the Generator cover, the chain may come off Gender
This type of Sprocket can have some play when worn
If it's NORMAL, it's a different story, but when it comes to this Type, which is a bit outward, it's a different story It is
When force is applied, the front of the Sprocket tilts to the Left Side
Then, the back side will inevitably be tilted to the Right Side, and the chain will be on the Sprocket It will not turn to Smooth
To deal with this, we created a Spacer between the lock Plate and Sprocket and set the rattling to 0 and dealt with it
In my case, I put in a Spacer shaped like a rock spacer with a 0.8mm thick steel plate It was
On some vehicles, only the Driven Sprocket may be off-set, and the Wheel may be It's easier to offset to Right
View detail
It looks like it
The whole thing is not quenched or soft overall
I didn't use it for Chain cut because the original Chain is Clip type was no problem
However, the pin on the Crimp is too soft and the tip was crushed when I applied force to try to crimp it
As for Crimp, it's useless
Cut a Hexagonal Wrench of the same thickness and put in a round tip Crimped
View detail
Insufficient strength
I used it in 520 Chain
RivetPin for Crimp will bend immediately when used once and it will not be possible to reuse
As Pin remains in Bolt of Base, the entire tool becomes unusable (It will not come off)
It transforms very easily
I think that it is better to purchase others even if it is honest price high
View detail
Garbage
How to use Even if it was used for reasons it was damaged.
Crimp Somehow, the tool bends and breaks
.
Is it for Motorcycle? Level.
No worth buying Waste of money.
Do not sell such things.
View detail
Cut only
Although I could do Chain cut, Crimp could not use the tool lost. It was a loss of cheap buying.. I will repurchase a different Manufacturer item. View detail
Fits: HONDA CHALY 70, HONDA DAX70, HONDA CHALY 50, HONDA DAX
I do not want to buy next.
Impression of installation, un-running.
Rear sprocket had no problem with installation.
The problem is Front
Because it is an Offset item, I use the attached Spacer, but this Spacer is a problem.
Accuracy is bad.
First of all, it was necessary to slightly polish the gap hole slightly in the position of the hole.
After wearing on the vehicle, rocking with hands - - -
The spacer is thin for the groove cut in Shaft and it does not make sense.
After all, it was decided to shave OEM's Spacer and install it.
To sell goods that cause such backlash to DriveSprocket - - -
I think that it is good to purchase those who think that price is cheap because it is good.
I think that I can not put in options next.
View detail