Reviews
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
as necessary
I bought this to attach Meter to a CUB I am creating.
When I installed it, I wondered if the NLamp's wiring was +Control, but the CUB's wiring did not light up, so I used a quick output Conversion Harness to deal with the problem.
I was concerned that the high beam lamp was too bright. The trip meter knob fell off and went missing during the test run, but I don't care.
View detail
Approximately six months after purchase, the
About six months after purchase, the Meter's display light stopped working due to poor contact.
Furthermore, during touring, the Knob portion of the mileage meter is removed and the meter number cannot be reset.
We plan to replace it with a new one from another Manufacturer.
Complete shoddy product, no recommendation.
View detail
I put it on cb400ss.
Is it a problem with Engine Displacement Volume? The actual speed and Meter are messed up. This will not pass inspection. I can't use it. View detail
Fits: HONDA APE 100, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA Ape 100, HONDA Ape Type D, HONDA Ape 50, HONDA monkey
TANAKA TRADING genuine style 120km
I replaced it with my friend's APE100 Big Cab. But the CUSHION and SPEEDOMETER do not fit well, so the fix is not good. (The picture is not updated due to WEBIKE error. I am writing reviews for things I bought now. The file size is the same, but some reviews warn that the picture file is large.) ----------------- ----------------------------------------- I replaced it by replacing it with a friend's APE100 Big Cabe, but CUSHION and SPEEDOTER didn't fit well. (Webike error is not updated. I'm writing reviews for purchases. The file size is the same, but some reviews are warned that the photo files are big) Powered by Google Translator View detail
Fits: HONDA LITTLE CUB, HONDA Super Cub 50, HONDA Press Cub 50
well bought
I bought it overseas for repairing my love Little Curve, which I have had for nearly 10 years. I had all the parts I needed, and various parts are also on sale, so it was very tasty. I am still installing, but the picture and product are the same~ It's also very fast^^ I bought it overseas for repairing my love Little Curve, which I have had for nearly 10 years. I had all the parts I needed, and various parts are also on sale, so it was very tasty. I am still installing, but the picture and product are the same~ It's also very fast ^^ View detail
Exactly what I was looking for!
Nobody imports this tach to America, so I'm really glad Webike had it. It's a perfect match to a speedo that I can find easily here. Thanks Webike! View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It broke down after 3,000 kilometers.
This is my second impression.
It broke down at 3000km as per the title.
However, it is not completely a quality problem, and after driving over 90km (of course, I am talking about the closed course), the needle started to shake like a metro gnome, and after about 300km, the needle stopped moving completely.
It's no wonder it's broken because I let it go too long without Brown.
However, it is a speed that can be reached with a LITTLE CUB, a Takekawa 81cc, a DAYTONAHigh Camshaft, a KEIHINcarburetor, and a Sprocket modified light tune, so I would not recommend it to anyone who wants a meter in this range anyway.
The OEM 60kmMeter didn't break down immediately after I swung it off.
As of February 2022, the OEM 90kmMeter is available for about 12,000 yen, so I switched to this one.
The price is three times higher, but the construction is also three times more solid (subjective).
I was going to REPEAT this product if it lasted 10,000km, but unfortunately it only lasted 1/3 of the time, so I won't buy it again.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It's a shame because I had high hopes for you.
When I tried to install the meter suppressor spring, one of the welds came off... View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
He's a bad guy.
I installed it on my SUPER CUB 50FI.
I was prepared for it because it was cheap and I had seen Impressions from other people, but it was a bad product if I bought it as an amateur.
The bulbs come right off and the sockets are too loose in the rubber and come right off the meter body. You can't install the OEM Bulb Socket because the size is different again.
Also, the Bracket in the Center to fix the Meter is too soft and deformed by the Spring, making it useless.
I knew I needed to process the Size, but I felt like I could push it in, so I put a little force and the MeterGlass broke. (This is simply a mistake on my part, though.)
You may need to be prepared to have it modified, reinforced, or even replaced with other parts.
It was cheap but I felt like I lost money.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
a good product
perfect compatibility. The performance is also accurate. I couldn't use the Takegawa product I bought before because it had a long inner length, but now this product is exactly perfect for general use. In many cases, Takegawa products have to use Takegawa for other parts to meet the exact specifications. It's much better to use cheaper now. View detail
Fast delivery. Good quarity. Nice chrome. Did not install it yet but everythings looks great. This product made in Taiwan. View detail
Tachometer for HONDA JOKER 90
11/30/2020 ordered a tachometer. The tachometer was received in Moscow on 03.02.2021. The tachometer is very high quality. Material: metal, chrome, glass, stainless steel, as it seemed to me. Definitely worth the money. ---------------------------------------------- 30.11.2020 year ordered a tachometer. 03/02/2021 of tachometer received in Moscow. Tachometer made very high quality. Material: metal, chrome, glass, stainless steel, I thought. Definitely worth the money. Powered by Google Translator View detail
Fits: HONDA LITTLE CUB, HONDA Super Cub 50, HONDA Press Cub 50
Good
Very good quality I recommend this product See you soon View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Typical shoddy product.
It is impossible to install without shaving the Handlebar Cover.
The standard of the bulb is different and the quality of the Wiring is lousy.
Larger than OEM, so it's hard to fit wiring.
After 100km of installation, the needle was shaking like a large and it was useless.
I emailed them about quality assurance and still no response.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It was the first time in a long time that I've been a cheapskate.
Bulb Socket is no good from the beginning.
The shape is very similar, but it doesn't stick.
I think it'll come with me.
The Socket is so ragged that I don't want to scrape it off and put it on.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
The price
It may be cheap, but the Socket of bulbs is useless.
It does not turn on due to poor contact.
I couldn't help it, so I soldered Wiring to the bulb.
If you want to install it in the LITTLE CUB, you will need to scrape the cowl on the meter.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Warmth
Before installation, it looks like the OEM and Size are the same
I've made sure it's a simple replacement, so it shouldn't be a problem
I'd like to replace it immediately, but I'm afraid that next year I'll have to start with a zero trip meter
I'd like to put it on so I can start
I really wanted to put Takekawa Digital on it, but it is too expensive and cannot be done
I'm just hoping it's accurate enough to be able to run it on its own
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
OEM Shape and easy to read
If you are an OEMMeter, you can't read the meter because it's Bore up It's very easy to see, but since it's an OEM shape, you have to look at it carefully to see that you've replaced it It is View detail
Fits: HONDA Shirley 70, HONDA Shirley 70, HONDA Shirley 50., HONDA Shirley 50., HONDA Dax 70, HONDA Dax 70, HONDA dachshund, HONDA dachshund
Parenthesis is good
I was worried about whether to go with Black or White, but I decided to go with White, which has a nice parenthesis It was the right thing to do
The needle of the Meter is also easy to see the Large in both day and night
View detail