Reviews
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
Approximately six months after purchase, the
About six months after purchase, the Meter's display light stopped working due to poor contact.
Furthermore, during touring, the Knob portion of the mileage meter is removed and the meter number cannot be reset.
We plan to replace it with a new one from another Manufacturer.
Complete shoddy product, no recommendation.
View detail
I put it on cb400ss.
Is it a problem with Engine Displacement Volume? The actual speed and Meter are messed up. This will not pass inspection. I can't use it. View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It broke down after 3,000 kilometers.
This is my second impression.
It broke down at 3000km as per the title.
However, it is not completely a quality problem, and after driving over 90km (of course, I am talking about the closed course), the needle started to shake like a metro gnome, and after about 300km, the needle stopped moving completely.
It's no wonder it's broken because I let it go too long without Brown.
However, it is a speed that can be reached with a LITTLE CUB, a Takekawa 81cc, a DAYTONAHigh Camshaft, a KEIHINcarburetor, and a Sprocket modified light tune, so I would not recommend it to anyone who wants a meter in this range anyway.
The OEM 60kmMeter didn't break down immediately after I swung it off.
As of February 2022, the OEM 90kmMeter is available for about 12,000 yen, so I switched to this one.
The price is three times higher, but the construction is also three times more solid (subjective).
I was going to REPEAT this product if it lasted 10,000km, but unfortunately it only lasted 1/3 of the time, so I won't buy it again.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
He's a bad guy.
I installed it on my SUPER CUB 50FI.
I was prepared for it because it was cheap and I had seen Impressions from other people, but it was a bad product if I bought it as an amateur.
The bulbs come right off and the sockets are too loose in the rubber and come right off the meter body. You can't install the OEM Bulb Socket because the size is different again.
Also, the Bracket in the Center to fix the Meter is too soft and deformed by the Spring, making it useless.
I knew I needed to process the Size, but I felt like I could push it in, so I put a little force and the MeterGlass broke. (This is simply a mistake on my part, though.)
You may need to be prepared to have it modified, reinforced, or even replaced with other parts.
It was cheap but I felt like I lost money.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Typical shoddy product.
It is impossible to install without shaving the Handlebar Cover.
The standard of the bulb is different and the quality of the Wiring is lousy.
Larger than OEM, so it's hard to fit wiring.
After 100km of installation, the needle was shaking like a large and it was useless.
I emailed them about quality assurance and still no response.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It was the first time in a long time that I've been a cheapskate.
Bulb Socket is no good from the beginning.
The shape is very similar, but it doesn't stick.
I think it'll come with me.
The Socket is so ragged that I don't want to scrape it off and put it on.
View detail