Reviews
Fits: HONDA MONKEY, HONDA CHALY 50, HONDA DAX70, HONDA DAX, HONDA GORILLA, Others , Others 4-pole terminal RegulatorSpec. It can be widely used for vehicles.
Voltage increased slightly when running.
I bought this Regulator to review the ignition system because the MONKEY was malfunctioning. It was not the direct cause of the problem, but the original one was so old that it seemed to be worn out. After replacing it with this product, the voltage when driving went up a little. It is a little bit larger than the OEM product, but I had no problem installing it. View detail
Recommended
Buy Plating
It's not in bad condition and I recommend it!
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, Others , HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Recommended
Inexpensive. Well made.
Recommended!
View detail
Not exactly what it was originally intended for.
Although it is not the original purpose, the spring of the stand switch interferes with various external parts installed, so I bought it to let it go.
It can be used just fine when co-tightened in the Footpeg Bracket hole under the Engine.
View detail
The entire Cylinder is out, so replace it with a new one!
OEMIgnition switch in tl50 is rotting away.
When you get it, Plastic in the Ignition switch is
It's cracked due to deterioration and the whole Cylinder is missing.
I have 4 Wiring, so I'm looking for a Honda4mini 4 Wiring.
I purchased this product
It will be diverted to →tl50 for CUB.
The shape of the coupler is different, so it's not a simple matter of just popping it on.
Kindly note that Wiring is the same color as OEM, so it's easy to tell!
I measured the length from the Ignition switch to the 6V MONKEY/GORILLA Main Harness, cut it off at the same length and installed it with Bullet terminal connection!
The feel when you turn the key with the pusher is brand new!
I'm so glad I'm not the only one!
Spare key is also included, so this will work for the time being (lol).
Useful for Repairing an old Honda4mini!
View detail
Fits: HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90, HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90
The more the old car feels like an old car
It is a Large-gauge cannonball Type Blinker that was used for Kamome CUB and others.
for Rear.
Not only is it highly visible, but it also has a cute back view.
Installation is only a matter of replacing the Rear blinker unit and wiring, which is integrated into the blinker bracket.
good point
The old car feeling is intensified and austere.
Visibility is perfect.
BracketWiring is also a Quantity:Set, so it is pontooned.
I like Plating's finish.
A bad point
●As a precaution, the Rear Blinker's Wiring runs through the Reverse side of the Rear Fender, so do not damage the Wiring.
There is a slight hassle in installation, but I think the finish is quite satisfactory.
It gives off the atmosphere of an old Motorcycle.
View detail
Fits: HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90, HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90
CUB looks like CUB.
It is a Large-gauge cannonball Type Blinker that was used for Kamome CUB and others.
They say a lot of things about Degeme Gold and so on (laughs).
It is not only more visible, but also closer to a Retro look.
Installation is only to replace the Front Blinker Unit and Wiring.
good point
The large blinker is conversely fashionable.
● Visibility is quite high.
Unit, as well as Wiring, is Quantity.:Set, so it is pontooned.
The construction is not bad.
The trend in the world is toward small size, but I dare to say that large size is fine.
Visibility will increase, it will be stylish, and it will be Retro.
View detail
Fits: HONDA MONKEY, Others , HONDA DAXetc.
Great buy
Nice oem style blinkers , chrome was great, good quality , great fitment for the model I am building being a 6 volt system, I am building a lady Dax st70 and these are the correct style for the model , this was the only place I could source them. Definitely a good recommendation for someone looking for these from me! View detail
Exactly what I was looking for!
Nobody imports this tach to America, so I'm really glad Webike had it. It's a perfect match to a speedo that I can find easily here. Thanks Webike! View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
a good product
perfect compatibility. The performance is also accurate. I couldn't use the Takegawa product I bought before because it had a long inner length, but now this product is exactly perfect for general use. In many cases, Takegawa products have to use Takegawa for other parts to meet the exact specifications. It's much better to use cheaper now. View detail
Fits: HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90, HONDA Cub C50, HONDA Cub C65, HONDA Cub C70, HONDA Cub C90
งานดีครับใส่แล้วเข้ากับตัวรถ...สินค้าถึงไว้. View detail
Necessary for CROSS CUBJA10 HeadlightLED
[How is it used?
I got this for Restore to turn my son's CROSS CUB into a commuter issue.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
There is a process to Rose the Meter, Rose the Headlight, and bite the Harness.
How was your experience with it?
It's the best! I first got the AC-DCConverter, but it seemed to be incompatible with the MinusControl CROSS CUB, so I searched the Net and this hit the spot.
With this harness, you can turn on the headlight when the key is turned on, just like a mid-size motorcycle.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There is no instruction manual, so I don't know how to install it, but you can find it on Net.
View detail
Attached to R&P
[How is it used?
Attached to R&P
Was the one you received as per Image?
So so
Was the installation difficult?
So so
How was your experience with it?
It's working fine.
[Included Parts:were they on?
It was there.
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA APE 50, HONDA APE 100, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA MONKEY
So good
So good! I installed it on my bike ape100. It was easily installed and it is very convenient and pretty. Next time I want to buy another color. It was installed without a separate product on the genuine headlight. Only light valve valve? --------------------- SO Good! I was seated on my bike APE100, I was easily installed, and I'm really convenient and I want to buy different colors. Genuine headlights were mounted without separate products. Light valve valve? Only, it is so good that it is very excited from genuine. View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
No problem
I installed it on my AA01fi with no problems, I've been using it for about 2 months and haven't had any problems. View detail
Fast delivery. Good quarity. Nice chrome. Did not install it yet but everythings looks great. This product made in Taiwan. View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB70
Dear CUB riders
The CUB has a light bulb that often breaks due to vibration.
This is the fate of a single cylinder engine without a balancer.
This is especially true for vehicles that have been bored up.
I think it's one thing to ask a motorcycle shop to do it, but it's easy to replace the bulb in the CUB, so by all means, keep it in reserve.
I Quantity feel the hassle of buying every single bulb.:I bought it in Set.
This is a complete set, so it's really convenient.
It's cheaper than buying from Single Item.
View detail
Tachometer for HONDA JOKER 90
11/30/2020 ordered a tachometer. The tachometer was received in Moscow on 03.02.2021. The tachometer is very high quality. Material: metal, chrome, glass, stainless steel, as it seemed to me. Definitely worth the money. ---------------------------------------------- 30.11.2020 year ordered a tachometer. 03/02/2021 of tachometer received in Moscow. Tachometer made very high quality. Material: metal, chrome, glass, stainless steel, I thought. Definitely worth the money. Powered by Google Translator View detail
Fits: HONDA LITTLE CUB, HONDA Super Cub 50, HONDA Press Cub 50
Good
Very good quality I recommend this product See you soon View detail
Fits: HONDA Shirley 50., HONDA Shirley 70, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Dax 70, HONDA Dax 70, HONDA dachshund, HONDA dachshund
Refresh is done.
I used it to service my 30 year old GORILLA, the NORMAL was rusty and bad looking so I bought this part! 。 Installation is easy and the NORMAL lens can be used as it is 。 Polished Rim is a nice touch. View detail