Reviews
It does not fit into the other 250 models.
I purchased this for use with Blinker relay, but it does not fit into Relay's Connector.
The shape is 250 type, but it does not stick to Male terminal because the direction of the terminal is 180° opposite to Connector.
It has no use as a Connector.
This ConnectorSingle Body can be used as a Harness, but I don't think that is what a Connector is.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
Poorly made, poor contact
I have used it several times and it is almost certain to have poor contact.
Spring is weak, Lamp side contacts are poorly made, and terminal height is different between hi and lo.
Do not buy this product as it is completely useless and cannot be reworked.
HondaOEMSocket also has many defects, but OEM is better.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
there is a problem
However, the base material of the contact point with the Valve is the same transparent resin as that around the Connector, so there may be a problem with the heat resistance of that part, or it may have melted into a sludge and deformed, making it unusable.
The period of use was about six months for weekday commuting use.
Since the OEM was a Black resin material only in that area, I assume that a heat resistant material was used there.
I assume that this product has a delicate Spring function that presses the contacts together or the contacts attach and detach, generating heat, which the material could not withstand.
Just before the damage, the Light was on and off due to vibration.
The contact point on the Valve side had also been cut off in the shape of the Socket side terminal at the Center contact point, probably due to poor adhesion caused by the Spring function.
The spring was stiff at the time of installation, and after installation, it was as if the spring had shrunk to the point of having no stroke.
We are now using OEM and have no problems, so we have decided that OEM is the way to go, even if it is more expensive.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
No wonder the price is so low.
When I installed the OEM parts, the low beam light came on without any problem. I installed the OEM parts and the low beam lit up fine, but the spring inside was weaker than the OEM parts and the contact seemed to be faulty. I guess it is because the price is so cheap. View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shirley 70
quality for the money
I purchased this product to use as a multi-reflector, but when I received it, there was an error in the dimensions of the Rim and Lens, so the Lens was uneven and there was a gap between the Rim and Lens. Also, the positioning protrusion of the Valve insertion part has a gap, which seems to be fine for Halogen bulbs, but when the LED Valve is installed as it is, it is tilted against the pattern of the reflector.
So I managed to install it by modifying it in various ways. I think the quality is good for the price.
View detail
Approximately six months after purchase, the
About six months after purchase, the Meter's display light stopped working due to poor contact.
Furthermore, during touring, the Knob portion of the mileage meter is removed and the meter number cannot be reset.
We plan to replace it with a new one from another Manufacturer.
Complete shoddy product, no recommendation.
View detail
I put it on cb400ss.
Is it a problem with Engine Displacement Volume? The actual speed and Meter are messed up. This will not pass inspection. I can't use it. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50
I can't get the acc out!
Used with Cub Pro JA42. After installation, the acc power supply could not be removed. After checking, it turned out that the white wire of the acc. was not making contact, the white wire was crimped inside the connector and the copper wire was not making contact. I fixed it myself and am now using it. I bought this product to take the acc out with ease, but spent a lot of time trying to figure out the cause of the defect. It was disappointing. If it wasn't defective it would be a good product. View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It broke down after 3,000 kilometers.
This is my second impression.
It broke down at 3000km as per the title.
However, it is not completely a quality problem, and after driving over 90km (of course, I am talking about the closed course), the needle started to shake like a metro gnome, and after about 300km, the needle stopped moving completely.
It's no wonder it's broken because I let it go too long without Brown.
However, it is a speed that can be reached with a LITTLE CUB, a Takekawa 81cc, a DAYTONAHigh Camshaft, a KEIHINcarburetor, and a Sprocket modified light tune, so I would not recommend it to anyone who wants a meter in this range anyway.
The OEM 60kmMeter didn't break down immediately after I swung it off.
As of February 2022, the OEM 90kmMeter is available for about 12,000 yen, so I switched to this one.
The price is three times higher, but the construction is also three times more solid (subjective).
I was going to REPEAT this product if it lasted 10,000km, but unfortunately it only lasted 1/3 of the time, so I won't buy it again.
View detail
Fits: HONDA Shirley 70, HONDA Shirley 50.
It's for Chinese CHALY.
There is no way to fit Initial ModelCHALY. It is made for Chinese CHALY. It is not a part of domestic OEM CHALY, but a fake one. It is only for Chinese CHALY. View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
He's a bad guy.
I installed it on my SUPER CUB 50FI.
I was prepared for it because it was cheap and I had seen Impressions from other people, but it was a bad product if I bought it as an amateur.
The bulbs come right off and the sockets are too loose in the rubber and come right off the meter body. You can't install the OEM Bulb Socket because the size is different again.
Also, the Bracket in the Center to fix the Meter is too soft and deformed by the Spring, making it useless.
I knew I needed to process the Size, but I felt like I could push it in, so I put a little force and the MeterGlass broke. (This is simply a mistake on my part, though.)
You may need to be prepared to have it modified, reinforced, or even replaced with other parts.
It was cheap but I felt like I lost money.
View detail
If you can't process it, it's useless.
I ordered the M10 Size and got one for M10 and one for M8?
I bought it because it's such a pain in the ass to process, and now I end up having to process it!
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Typical shoddy product.
It is impossible to install without shaving the Handlebar Cover.
The standard of the bulb is different and the quality of the Wiring is lousy.
Larger than OEM, so it's hard to fit wiring.
After 100km of installation, the needle was shaking like a large and it was useless.
I emailed them about quality assurance and still no response.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
It was the first time in a long time that I've been a cheapskate.
Bulb Socket is no good from the beginning.
The shape is very similar, but it doesn't stick.
I think it'll come with me.
The Socket is so ragged that I don't want to scrape it off and put it on.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
Difficult to deal with.
I chose a transfer for payment, and I've emailed them twice to inquire about the transfer address, but no gravel. It's a shame. It's a shame. Is it going to be Cancelation as it is? View detail
Fits: HONDA dachshund, HONDA dachshund
Chinese quality
It arrived today.
We were about a week ahead of schedule.
However, the bad Plating process is not a good idea.
I'm disappointed
Tail lamp installation bolt is also one.
Only one is included.
I'm not happy with everything.
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, Others , HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
No, no!
The product is different from the picture, it has holes and Rivet struck Furthermore, the Blinker bulb cannot be replaced I think it is the worst product When the bulb breaks, I have to throw it away 4,000 yen is too high for such a thing View detail