Reviews
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Recommended
And it's not bad!
If you're looking for a good OEM degree, it's faster to buy this.
View detail
Fits: HONDA Grom MSX125
Tanaka Shokai's Rear cowl for Grom
I am satisfied with both the look and feel of the product.
The Large Change was reasonable, which is a big help.
I am planning to purchase other parts in due course.
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50
OEMs are the same etc.! If it deteriorates, this is the way to go!
Replaced due to stiffness and tears associated with OEM deterioration!
I forgot to take a picture of it after installation, but it's been 5 years since it was installed.
No durability issues!
It's cheap and this is what I need!
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Side cover installation
The Left Side Cover is the same as the OEM installation method, just snap it in. The Right Side Cover is fixed to the Frame by adjusting the width of the two included brackets, and the BoltQuantity is fixed on top of it.:Fixed it with 2pc. the rust on the Frame hid a little and fooled me. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
So so
Why is it that overseas-made products are so much easier to clean after arrival? It's dirty.
It was assumed to be painted, so it's good.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's a good part for a processing base
Garbage on paint
It is similar to the OEM Product but different
The dent in the middle of the sticker is about 5mm smaller than the size of the sticker
If you're going to put an OEMSticker on it, I don't think you should buy it …
I bought this product with the assumption that I would process it, so no problem
View detail
I am satisfied.
I didn't know how to install it and replaced it by hand
In the end, I removed all the side covers and did it one side at a time
Quantity:Pair (for Left and Right) The position of Screw and the procedure were slightly different in the
The accuracy of the product and the print quality is perfect
Yellow Color to Material:I'm a little bit shifty in replacing it with Carbon Style
I'm looking for a Sticker and a Decal that looks good right now
View detail
Fits: HONDA Grom MSX125
It looks good, but it's a challenge to install
I replaced the Cowl when it fell over and cracked
It's much cheaper than having a complete set of OEMs
Front Blinker is a mandatory Other Brand Product It's not easy to install if you don't put it on again The surface was made beautifully but the paint was stuck to the back OEMRubber parts are not available at all (Maybe we can use it if we expand the hole.)
The bolts of the brake hose catcher had to be modified as well
The look is more to my liking than when it was NORMAL
but I didn't want to install it again
View detail
Satisfied enough
I was worried that it would be cheap because of the Carbon Style, but the price is well worth it It's transcribed and self-satisfied enough! The installation is easy to remove and replace the inner Screw of the side cowl Only the replacement of BushRubber is troublesome, but you need to pull out the end of the BushRubber by force If you push it with a slotted screwdriver etc. and turn the rubber, it will fit immediately If the hole of the attachment part in the body of the car is a little small, but it is OK in about 10 seconds if you shave it with the stick File Is Parenthesis good? View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
the quality is very bad
the quality is very bad .. the process is very rough .. I am very disappointed View detail
Fits: HONDA Zuma X, HONDA Zuma X
Carbon Style Surface processing is as Image!
Parts' finish is almost satisfying. Especially the surface seems to be Tough and as expected. A bit of BALI was able to be fixed with Sandpaper. Just as for the installation, as the pioneer who read it somewhere says it is pretty rough. In my case I bought a simple Ratchet wrench even without even Hexagon Bolt right under the Parts and TRY again. In addition, the size of attachment Screw also needs to be changed and changed from 4 mm thick to 5 mm thick. (Screw mountain does not bite in the hole on Parts side) Since Cowl in front of the foot is almost entirely removed, I cleaned up my thoughts at this time. Since it is a tree Screw, it will be NG detached many times.. I am satisfied with the Large that I attached. View detail
Fits: HONDA MONKEY
I am disappointed expecting too much
Since I purchased a used gold monkey whose degree of exterior is not so good, I tried to make it shiny with this new exterior set. First of all, although it is a color of gold plating, it is slightly more yellowish compared to the original gold, it has been a messy finish with hulamura leading to the handle. Since the position of the screw hole in the headlight case is misaligned, the bolt can not be screwed completely and gives up the use. The tank was an important part to put in gasoline, so I was scared and could not use it, after all it stopped to use the front and rear fenders and handle, side cover, muffler cover. The rear fender could not be mounted straight, the front fender was too big to install a washer chewing the washer. View detail
Blinker of MSX 125 can not be installed.
The shape is for MSX125, but the OEMBlinker on MSX125 could not be installed. The position of the Bolt mounting hole is different from the Large side. Although it will be attached if it is processed, it is a hesitating thing because unnecessary holes also remain. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
Plating Side Cover
I bought it for MONKEY for Right Side.
After riding on a rainy day, if you do not clean it and leave it for a while, things like point rust can not be taken. We do not have to worry about resin Parts and need extraordinary cleaning.
Because there is a punch at the center in the center part, pasting Seal as it is will cause air bubbles.
View detail
Fits: HONDA Grom MSX125
For Original paint
Purchase an Exterior Set to AllPaint.
So Carbon Style is gone.
Regarding installation, each part Rubber Bush is not used Spec. And it is not necessary to transplant from NORMAL.
The troublesome part was Blinker part.
Since it was structured on the assumption of Universal Blinker, NORMAL does not fit as it is.
We cut off Blinker 's Mounting Hardware, made Cover' s hole the same as NORMAL, or took some other processing and mounted it.
I think Carbon print was being cleaned without problems.
View detail
Grom's Blinker can not be installed.
Grom OEMBlinker could not be installed because the shape is for MSX 125. Bolt mounting hole also needs to be machined small. It was disappointing because the quality is not that bad. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
4L look essentials
Purchased for 5 LMONKEY's Imechen. Although Battery cover had a slight difference in Grommet position, it was possible to plug in Limit without processing. The Exhaust System side installed the Up Exhaust System, so do not use it this time and enter the storage - - - If possible, Quantity : Pair (for Left and Right) It is a thank you if there is setting of Rose selling.
It was disappointing that BALI was a lot, paint was mixed with Garbage, etc. It was the first time that it was made, the person who was concerned about the appearance might be safe if he thought that it was Painting Base. However, since it can change the impression of appearance easily easily, it is recommended for those who are considering 4 L looking up.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA For Ape and other φ130 headlight cars, HONDA For Ape and other φ130 headlight cars
A feeling of a Fit is perfect. However, I thought that the attachment Bolt should just have been attached. It is cheaper to buy and arrange in the Home center, although the Bolt is a certain auction only for a Bikini cowl.
A feeling of a Fit is perfect.
However, I thought that the attachment Bolt should just have been attached.
It is cheaper to buy and arrange in the
Home center, although the
Bolt is a certain auction only for a Bikini cowl.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
One cm of 8M carries out color special purchase of the measure against (it keeps by an inner side) with which making the purchase cannot balance left-hand side by the Stay of ? attachment as it is since 4L MONKEY was exchanged for the D
One cm of 8M carries out color special purchase of the measure against
(it keeps by an inner side) with which making the purchase
cannot balance left-hand side by the Stay of ?
attachment as it is since 4L MONKEY was exchanged for the Down muffler,
Kana which maintains a Balance if it puts into the car-body side of the
Stay?
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA For Ape and other φ130 headlight cars, HONDA For Ape and other φ130 headlight cars
Although the Parenthesis of the NORMAL was good enough, since my GORILLA of this was used for commuting, the rainy day had ridden and it was made to want to receive the water splash raising from a front Tire in the body directly, the Bikini cowl was order
Although the Parenthesis of the NORMAL was good enough, since my GORILLA of this was used for commuting, the rainy day had ridden and it was made to want to receive the water splash raising from a front Tire in the body directly, the Bikini cowl was ordered to the trial. I think that the water splash raising was able to be reduced very much, thanks to the Cowl. Does a front countenance become tight and is visible? In addition, attachment was serious probably because a Size did not suit. But it is satisfactory in general. View detail