Reviews
Tanaka Shokai (TANAKA) Tanaka Show Kai Seat StopperRubber Se
It is a good product that fits perfectly. View detail
in line with the price
I am thankful that it is much cheaper than OEM Product.
It is also nice to know that the body can be any color since it is Carbon Style.
With JC61, if I wanted to use the collar that came with the OEM, I had to use a drill to widen the hole.
If you use Bolt without collar, it may not be necessary to modify it, but I am afraid that it may crack.
For people who prioritize cost performance anyway.
View detail
Fits: HONDA shirley, HONDA dachshund
I put it on CHALY.
We have a product BALI, so we have to prep it.
Painted. I think it is good for the price.
View detail
Fits: HONDA DAX, HONDA CHALY
Tanaka Dax fender
Fitment is great and paint finish is beautiful. Fitted on a USA spec 1970 Honda CT70 that I am converting to Japanese spec. View detail
Cute colors.
[How is it used?
Purchased for 4Lfor MONKEY.
Both the OEMTank and my previous Chinese Tank have rusted and I bought the Tank because it was cheap. The other Tank will be rusted out etc. while I use this Tank.
The color was a lovely Yellow color, which was the deciding factor in my purchase.
Was the one you received as per Image?
I am glad that the color was exactly as I had imagined in the picture of the product.
Unfortunately, it looked like the inside of the Tank was rusty, although only slightly.
I think the cospa is good.
Was the installation difficult?
Simply remove the OEMTank and attach it in the same manner.
Rubber parts for the tank are removed from the OEMTank and reused.
It is not that difficult a task.
I thought I had the Fuel Cock on tight, but it started leaking when I added Gasoline, so you should be careful and make sure it is closed tight. I re-tightened it and the leak stopped.
How was your experience with it?
First of all, it looks cute. As soon as I put it on, it felt right. I was glad I chose this one, because I could have bought a paint base, but it would have been too much trouble. If I get tired of it, I will paint this tank.
The size is perfect, and I'm happy with it.
[Included Parts:were they on?
Fuel Cock and Key x2pcs. and 2 types of GasolineTube were included.
[Was there anything that disappointed you?
It is supposed to be new, but it looks a little rusty inside the Tank, which is disappointing. Other than that, I am satisfied with the cosmetics.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
It would be nice if there were!
It looks different when it is there!
I want it to be attached from the beginning.
View detail
Recommended
Cospa!
Recommended!
Rust is concerned.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Recommended
And it's not bad!
If you're looking for a good OEM degree, it's faster to buy this.
View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
It looks like Mischief, but the impression is completely different.
[How is it used?
The price was low, so I bought it to try it out.
Was the one you received as per Image?
It was not as thick as I expected and was peLePera Material.
Was the installation difficult?
It can be easily attached by simply inserting it between the Normal lightRim.
How was your experience with it?
The look and feel of the product is completely different. It is both cute and endearing.
[Included Parts:were they on?
There are no Included Parts:.
[Was there anything that disappointed you?
The brim part is a little exposed to Light's light, but I didn't mind too much.
Because the material is thin, it may cause injury if you are not careful. It is especially dangerous when it hits a person.
▼Material in case of:It looks like Stainless Steel, so it seems to be resistant to Rust.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
OEMCap, Cookok, used for external +3cm
I also have an OEM tank and I think the mounting holes and other dimensions are the same as the frame. The Black and White are painted and the Black is painted. The welds around the cook are slightly rusted on the inside back, but I don't think it will be a problem in use, so don't worry about it. The weld finish is inferior to the OEM tanks, but I would recommend this one if you are looking for an OEM used one to redo for a better price. View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
It wasn't just about looks!
I thought it was just custom parts for looks.
MONKEY50 when straddled.
Because of its small size, the distance between the body and the headlight is very close.
The light reflected off the helmet's shield and was difficult to see, but after installing Visor, the reflected light seems to have decreased.
The construction is slender, but once installed and secured, there is no problem.
View detail
Defective Reflector
The M6 Screw is bent and the Nut will not fit again. We fixed it by setting up the Tap again. View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
See Up??
Type that is inserted into the gap between the Body and Lens of Headlight.
The Visor side has a turnover so that it will not rattle when firmly inserted, and the appearance has been dramatically enhanced.
HeadlightQuantity:Pair (for Left and Right) If you remove the screw from the first screw, you also need to loose the next removed Lens, but a Phillips screwdriver is all you need.
When removing and attaching the Bracket that holds the Lens Cover
It was easy to install, although a little hang is required.
View detail
Fits: HONDA Grom MSX125
Tanaka Shokai's Rear cowl for Grom
I am satisfied with both the look and feel of the product.
The Large Change was reasonable, which is a big help.
I am planning to purchase other parts in due course.
View detail
4L Wind Tank
4L style! backslide (^o^) /But the amount of fuel will be a little less than OEMTank, so please be sure you are satisfied with your order before purchasing. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Cospa is good
Purchased additional items because of the good cosmetics.
I use it with White's TL Seat depending on my mood.
The ride is neither good nor bad.
The installation is a normal Seat replacement, but the hole position is
It is a little tight.
View detail
Plating section is Material:Plastic and cheap….
[How is it used?
I bought it to put a reflector next to the headlight to make it look like an old car.
Was the one you received as per Image?
The base part of the plating is made of Material:The large size is about 50mm in diameter, which I think is a good size.
Was the installation difficult?
The M6 Screw was long, so we cut 5mm off and used it.
How was your experience with it?
I am glad I purchased it because it gives off a cheap but good atmosphere.
Durability will be verified in the future.
[Included Parts:were they on?
Rubber cushion for fork mounting is included.
[Was there anything that disappointed you?
Plating part is Material:Plastic and cheap point. (It is actually cheap, but …)
Reproduct such as ▼BRC seems to be a little small in large size, but the foundation is Material:It seems to be Aluminum, so it is difficult to obtain the OEM equivalent.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Just right with moderate quality.
Carrier originally had Bamboo Kawa Plating for CUB, so I put it on, but I thought Black would look good on JA45 Green Light, so I bought it. It was not so luxurious, but matched with the cool feeling of CROSS, which was what I was aiming for. The price is about half of the manufacturer's product, and I can now put thin luggage in it. The only thing I regret a little is that the body is painted black, but the included screws are silver. I read this imprement before I bought it, and it said that the CUB needed to be modified, but the CROSS was large and sturdy. View detail
Miscellaneous.
I bought Side Panel because I liked it.
I did not check it as soon as it arrived and installed it just now.
Poof...
Something likeQuantity:Pair (for Left and Right) The holes are clearly visible after they were plugged one by one, and can be clearly seen in the right light.
View detail