Reviews
Tanaka Shokai (TANAKA) Tanaka Show Kai Seat StopperRubber Se
It is a good product that fits perfectly. View detail
in line with the price
I am thankful that it is much cheaper than OEM Product.
It is also nice to know that the body can be any color since it is Carbon Style.
With JC61, if I wanted to use the collar that came with the OEM, I had to use a drill to widen the hole.
If you use Bolt without collar, it may not be necessary to modify it, but I am afraid that it may crack.
For people who prioritize cost performance anyway.
View detail
Fits: HONDA DAX, HONDA CHALY
Tanaka Dax fender
Fitment is great and paint finish is beautiful. Fitted on a USA spec 1970 Honda CT70 that I am converting to Japanese spec. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
It would be nice if there were!
It looks different when it is there!
I want it to be attached from the beginning.
View detail
Recommended
Cospa!
Recommended!
Rust is concerned.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Recommended
And it's not bad!
If you're looking for a good OEM degree, it's faster to buy this.
View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
It looks like Mischief, but the impression is completely different.
[How is it used?
The price was low, so I bought it to try it out.
Was the one you received as per Image?
It was not as thick as I expected and was peLePera Material.
Was the installation difficult?
It can be easily attached by simply inserting it between the Normal lightRim.
How was your experience with it?
The look and feel of the product is completely different. It is both cute and endearing.
[Included Parts:were they on?
There are no Included Parts:.
[Was there anything that disappointed you?
The brim part is a little exposed to Light's light, but I didn't mind too much.
Because the material is thin, it may cause injury if you are not careful. It is especially dangerous when it hits a person.
▼Material in case of:It looks like Stainless Steel, so it seems to be resistant to Rust.
View detail
Fits: HONDA Grom MSX125
Tanaka Shokai's Rear cowl for Grom
I am satisfied with both the look and feel of the product.
The Large Change was reasonable, which is a big help.
I am planning to purchase other parts in due course.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Just right with moderate quality.
Carrier originally had Bamboo Kawa Plating for CUB, so I put it on, but I thought Black would look good on JA45 Green Light, so I bought it. It was not so luxurious, but matched with the cool feeling of CROSS, which was what I was aiming for. The price is about half of the manufacturer's product, and I can now put thin luggage in it. The only thing I regret a little is that the body is painted black, but the included screws are silver. I read this imprement before I bought it, and it said that the CUB needed to be modified, but the CROSS was large and sturdy. View detail
Heritage125 by BULLET (DAX pacifier) I was able to install it on the
The price of the OEM Rear Carrier for the Heritage 125 by Bullet was too high, so I decided to buy this Tanaka Shokai Rear Carrier With Glove Bar for the old DAX. I was not sure if there were other OEM carriers made by 00moto, but I asked both companies about the dimensions of the carriers through webike a little while ago. So, I chose Tanaka Shokai because of their sincerity.
I could not compare the two, but I was able to install this Rear Carrier from Tanaka Shokai on my Heritage 125, which costs 22,000 yen if it is OEM, but this is sufficient for me. Also, the Grab Bar on the Heritage125 has a reflector at the place where I hold it, so it was hard to lift it up when I put it on the main stand, but now it is easy to put my hand on it. The only strange thing is that there is a small hole on the Grab Bar where you can put your hand in, but I think it is unnecessary because it hits my hand a little. Also, it would be nice to have not only Plating but also Black paint. By the way, if I wanted more, it would be better to have only a regular solid carrier instead of a Grab Bar, so that I can load a lot of luggage.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
For Custom
I bought it for a custom tank in black and sprayed Rainbow Lame on it to give it an austere MONKEY look. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
For Custom
I bought this for my custom tank in black with Rainbow Lame on top. View detail
Used for MONKEY4L
Purchased to install Takegawa zStyleFender on my MONKEY4L.
I recommend you to make your own Bracket because it is ugly!
View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
cute little
First of all, I bought it because it is cute. I was able to install it with no problems. View detail
Fits: HONDA Shirley 50., HONDA Shirley 70, HONDA Shirley 50., HONDA Shirley 70
For Seat replacement in CHALY.
I bought this because CHALY's OEMSeat was damaged. Reasonable
It looks solid and sturdy for the price. It is not hard and Touring seems to be Large sturdy.
View detail
Cool!
It fits so well that I wish it came with it from the start!
And it's easy to install!
It tightens up around the Front!
Recommendation.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
By far the best center carrier
"Don't buy anything else, buy one from Tanaka.
Nothing is missing from practicality and price.
I've tried several, but this one is the best and the cheapest.
It is not too difficult to store various bags together.
Will repurchase 500%
Tana Sanghoe fighting!! ------------------------------------------------------------ -------- Don't buy anything else Practicality Kanji Price There is nothing missing I've tried various things, but it seems to be the cheapest and the best It is not too hard to compose various bags. 500%of the repurchase doctor Tana Vayment Fighting! Powered by Google Translator"
View detail
Unique Features
It has a Binder.
It can be used to hold small objects such as removed gloves.
Very convenient
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Tanaka products seem to be the best among center carriers.
Tanaka products seem to be the best among center carriers.
I have tried various products from other manufacturers.
I am satisfied with the price, quality, practicality and design.
In particular, it was delivered to Korea this time, and it arrived in 4 days, right?
It is the best Webike as fast as domestic delivery. Tanaka Sanghoe Firm ----------------------------------------------- ----------- Tanaka's product seems to be the best center carrier. I've used a variety of products from other manufacturers. Price, quality, practicality and design are all satisfied. Especially this time, you came to Korea in 4 days. It is the best Webike, as fast as domestic delivery. Tanaka Sanghoe Powered by Google Translator
View detail