Reviews
Fits: HONDA shirley, HONDA dachshund
I put it on CHALY.
We have a product BALI, so we have to prep it.
Painted. I think it is good for the price.
View detail
Cute colors.
[How is it used?
Purchased for 4Lfor MONKEY.
Both the OEMTank and my previous Chinese Tank have rusted and I bought the Tank because it was cheap. The other Tank will be rusted out etc. while I use this Tank.
The color was a lovely Yellow color, which was the deciding factor in my purchase.
Was the one you received as per Image?
I am glad that the color was exactly as I had imagined in the picture of the product.
Unfortunately, it looked like the inside of the Tank was rusty, although only slightly.
I think the cospa is good.
Was the installation difficult?
Simply remove the OEMTank and attach it in the same manner.
Rubber parts for the tank are removed from the OEMTank and reused.
It is not that difficult a task.
I thought I had the Fuel Cock on tight, but it started leaking when I added Gasoline, so you should be careful and make sure it is closed tight. I re-tightened it and the leak stopped.
How was your experience with it?
First of all, it looks cute. As soon as I put it on, it felt right. I was glad I chose this one, because I could have bought a paint base, but it would have been too much trouble. If I get tired of it, I will paint this tank.
The size is perfect, and I'm happy with it.
[Included Parts:were they on?
Fuel Cock and Key x2pcs. and 2 types of GasolineTube were included.
[Was there anything that disappointed you?
It is supposed to be new, but it looks a little rusty inside the Tank, which is disappointing. Other than that, I am satisfied with the cosmetics.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
OEMCap, Cookok, used for external +3cm
I also have an OEM tank and I think the mounting holes and other dimensions are the same as the frame. The Black and White are painted and the Black is painted. The welds around the cook are slightly rusted on the inside back, but I don't think it will be a problem in use, so don't worry about it. The weld finish is inferior to the OEM tanks, but I would recommend this one if you are looking for an OEM used one to redo for a better price. View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
It wasn't just about looks!
I thought it was just custom parts for looks.
MONKEY50 when straddled.
Because of its small size, the distance between the body and the headlight is very close.
The light reflected off the helmet's shield and was difficult to see, but after installing Visor, the reflected light seems to have decreased.
The construction is slender, but once installed and secured, there is no problem.
View detail
With a GIVI Rear Box on a Heritage 125, you can get a stop-lamp.
I have previously installed … and reviewed it on a BULLET Heritage 125 without any problems. Of course, it is the best cosmetic product in that respect.
But, well, I don't think it is supposed to be like that, but if you try to install a GIVI rear box on this Carrier (which I did), the GIVI box will stick out too much at a 60-degree angle backwards from the Carrier bar. The GIVI box protrudes from the rear of the large box. Also, the weight of the GIVIBox is so heavy that the innermost 1 pc of the 3 horizontal bars of the Carrier is just barely touching the Stop-lamp.
I don't think an improved version will be released based on this story, but I would appreciate it if the angle of the carrier bar is directly up instead of 60 degrees diagonally backward, and I would like to see improvements after the trial installation so that the stop-lamp will not be too close to the rear of the car. (Of course, I can say this because I installed the GIVIBox on my own, and of course it is not designed to be installed with the Rear Box, but I think it would sell even better if a thoughtful manufacturer were to pay attention to these issues.)
View detail
I do have a presence.
I bought it as a sub for the CUB Fuel Tank I am currently creating!
I can't put a fuel gauge on it, so it's for when I'm in a good mood and I run out of gas.
1L capacity is enough and the Design is in good shape!
It was recently ready to be ridden, so the whole thing was reworked while being driven.
View detail
TANAKA TRADING Front Fender
About quality and texture it's very neat and amazing About the feeling of use It gets a little messy because it has to be processed and installed Products to buy together Bolt, nut, cable tie Difficulty of installation easy Cost performance and comparison with other products Everything is done at the price The quality of the product is also high About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I purchased it to process and install it on my bike, but I really envied that msx 125 owners could buy a really good product View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90, HONDA little cub, HONDA cub, HONDA little cub, HONDA cub
I don't have a spare tan, but...
Cost performance was good, but the mounting holes were slightly misaligned. View detail
PetitCustom
Quality is high, like Maker Option. It would have been better if there was an instruction manual. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
The OEM tool box cannot be installed without modification.
I didn't have high expectations since it was a Chinese product, but I thought I'd be satisfied with the rust-free, well-painted finish.
The MONKEYOEM tool box could not be attached without modification because the bolt could not reach it. Only that part needs to be modified.
Quantity with Frame:Pair (for Left and Right) The mounting Pitch was slightly open, but Bolt went in, so tightening it up was not a problem.
Naturally, the OEM Helmet lock and Tail lamp arrived without difficulty.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Waited quite a long time because advance reservations must be made But when received, it's very cool. View detail
CenterCarrier
It's a great product. The spring is a little too hard. It is also useful to prevent the body from being scratched by the foot when getting on and off. The Hook under the Left hits the body as written in the Instruction Manual, so it is better to bend it. View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100, HONDA Ape 50
For the price
I installed it on my MONKEY. The price was less than half of DAYTONA's, so I didn't expect much, but the quality was good. It was Level. I installed it by myself, but I had to prepare the shockproof rubber around the bolt by myself. I think it looks too simple, so I added a line to make it look better. I think it's a good product for the price. View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90, HONDA little cub, HONDA cub, HONDA little cub, HONDA cub
Because the inside of the Tank was rusty.
I bought this as a Spare for the Rust removal period as I had some rust in my existing Tank.
You can use it as it is, but as a connection between Tank cleaning.
good point
Much cheaper than OEMTank.
It can be pimped out. The capacity is the same.
Existing meter meters can also be used.
A bad point
The OEM has two fuel ports while this one has one, so the Reserve function cannot be used.
If you don't use the Reserve function, you can continue to use it as is without using it.
However, if you take the time to remove the rust from the OEMTank, you can use it, so I use it as a bridge in the meantime.
Gasoline is vaporized, so it will rust in the tank if left unattended.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Side cover installation
The Left Side Cover is the same as the OEM installation method, just snap it in. The Right Side Cover is fixed to the Frame by adjusting the width of the two included brackets, and the BoltQuantity is fixed on top of it.:Fixed it with 2pc. the rust on the Frame hid a little and fooled me. View detail
The quality was better than the price.
The Rust on my original Rear Carrier was so bad.
I purchased and replaced this product.
Before replacement, I cut the Bracket for Blinker installation on the Carrier with a cananometer.
If this Bracket is left on, it will interfere with the Normal blinker.
If you don't want to cut it, you'll need to deal with relocating the Blinker to this Bracket.
I think the quality is unquestionable for the price.
But there is Large land quality... sharpness of the cutting surface and welding BALI was going to cut my hand.
File hung and evened out before installation.
View detail
Fits: HONDA Tanaka Shokai BatteryBracket(ca1355)(ca723)(ca440)(ca058), Others
We've got it fixed for now.
When I converted MONKEY to 12V, there was a battery case, but there was no battery band.
With this Size Battery, it was just the right length at 170mm.
Cost performance is great because of the low price.
I'm just worried about the quality of the Rubber and it doesn't seem to be durable.
I'm happy with it, as long as it was fixed for now.
View detail
I am satisfied.
I didn't know how to install it and replaced it by hand
In the end, I removed all the side covers and did it one side at a time
Quantity:Pair (for Left and Right) The position of Screw and the procedure were slightly different in the
The accuracy of the product and the print quality is perfect
Yellow Color to Material:I'm a little bit shifty in replacing it with Carbon Style
I'm looking for a Sticker and a Decal that looks good right now
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
That was proprietary
The length of the Bracket is wrong as reviewed in other sites and so on I drilled a new hole in the Cowl and installed it because it was going to be gutted against the Cowl, although I could do it The only thing that is disappointing about this product is the accuracy of the bracket It was If you are really concerned about accuracy and appearance, I think the Carrier from Takemoto or KI◯ACO is a good choice It's a good choice If I can do the processing myself, this one has more flavor, so I'm personally satisfied with Large View detail
Fits: HONDA Grom MSX125
Easy!
It's not particularly difficult to install, but if you want to put a License Plate Light on it, it's pretty much the same thing Because it is narrow, it is offset by a few centimeters with an appropriate plate, and the small size of Emon is used UniversalLED is pasted as a license plate light
It looks simple and very good
View detail