Reviews
Parenthesis good!
I installed it and I am satisfied with its appearance and Parenthesis.
However, the Change Pedal and the sub-frame interfere with each other because the engine is set to 125cc, and it seems that some ingenuity is required for installation.
View detail
4lMONKEYTankCushion
The quality of the product was good and inexpensive View detail
3cm longer but stock look
Here is my second frame I purchased from webike and I'm pleased with the quality of these.plus being 3cm longer than stock helps with engine choices. I use the zongshen zs190cc engines for mine and have plenty of room between the fender and head of the engine. View detail
Quality for a low price
This was my first frame purchase and am glad I ordered it.i used this to build my first monkey z50j and here in the states I was able to register it for street legal use. View detail
Monkey frame
For the price of these aftermarket frames they are good quality and exactly like the honda z50j monkey. These are replacements but I use them to build custom bikes. View detail
Monkey z50j
For the price you can't beat it.this is my third frame I've ordered and I'm satisfied with webike.japan for delivery and price.with the 3cm long frame I'm able to install a zongshen 190cc engine with ease. View detail
It's tight and nice.
Unlike the OEM STAND, I am satisfied with the Large change due to the quality and ease of installation.
According to the other imprements, the sensor of STAND needed to be adjusted by Washeretc. when installing the sensor of STAND, but in fact, there was no such problem, and the sensor of STAND was working fine just by replacing the OEMSTAND with the new STAND. In fact, it did not happen. I just replaced the OEMSTAND with a new STAND and the STAND's Sensor worked fine.
View detail
Seems strong for the price.
If the MONKEY has 12inch wheel, 330mmRear suspension, and the Swing Arm is about 20cmLong, it should be about 260m. It is a little too far down, so it is just right to adjust the rest by using a collar.
It's STAND, so even if it's cheap, it's good enough because it's something that will get scratched whether it's of poor quality or not.
View detail
Frame for monkey
Good product, fast delivery,good company ,frequently updatedinformation about the shipmentof the product the next I buy again from webike thanks for yours cooperation View detail
Tanaka Shokai Main stand
Minimoto PerformanceZ-1 125ccEngine installed, the OEMfootpeg interfered with the engine. Tanaka Shokai Main stand purchased
The result was an exquisite Clearance that did not interfere with the Engine.
Since it is lower than the OEMfootpeg, the Brake pedal position will be a little higher.
For reference, there was no problem if the Pedal position was lowered to accommodate.
View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
This is a necessity when attaching Rear Sets.
Installation is very easy, just remove the 4 bolts from the NORMAL footpegs and reattach them, I had a little trouble putting the springs on because they are not built in. View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
Required for Rear Sets
Type that mounts to the engine with 4 bolts.
It's more solid than the picture and I'm using it without any problems.
I wore 10Inch and added Rear Sets, so I couldn't use Normal stand.
We selected this product and are satisfied with the peace of mind and cost effectiveness.
View detail
It is a little thinner than the Honda APE OEM
What made you decide to buy?
Longer STAND is needed due to the change in suspension You can choose from many different length sizes and the best part is that the price is cheap
How was your experience with it?
I don't know about the durability of this bike, but the welding is very good I could improve the inclination of the motorcycle
Was it difficult to install? (In the case of hard parts)
The spring length needs to be adjusted after the replacement Because the hook part of the spring that comes with the spring was set long, I adjusted the hook part and installed it
What is the point or hang of installation (for hard parts)? I think it's easier to hang Spring when STAND is up Pulling Hooketc. tools is cheaper to install
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer?
We ask you to continue to provide products that other manufacturers cannot cover in the future
[Do you have any products to compare it to? None
[Others] None
View detail
Mounting on Grom
Swingarm exchange (25 mm Long + DAYTONA suspension) After that, I tried installing this product instead of Standard STAND shortened. Body does not work, but with Grom Standard, Screw Mountain is opposite and the orientation of Bolt nut is reversed, so we removed the Sensor. Also, because it comes in contact with Swingarm's Stubby at the time of storage, it is under consideration of processing. Because I used the original Bolt kind, I did not use the attached Bolt.
I chose 235 mm for measurement, but I also feel a bit too standing. I have not tried running yet, but since the part to be installed on the ground is Large, it's a leg (?) Is easier to raise and lower than the StandardSTAND that is in the middle. quality - I think the texture is the same as StandardSTAND.
View detail
Hi all, This side stand is of the highest quality and finish, easy to fit and fits perfectly. I would highly recommend this product.
Hi all, This side stand is of the highest quality and finish, easy to fit and fits perfectly. I would highly recommend this product. View detail