Reviews
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Focus on appearance
[How is it used?
Purchased for 4Lfor MONKEY.
I was looking for a down type muffler because the exhaust system and carburetor seemed to interfere with each other when replacing the carburetor.
Among them, I bought this product because it looked cool and was reasonably priced.
Was the one you received as per Image?
The color and shape were exactly as shown in the Image.
Was the installation difficult?
It is not difficult.
At first I thought the exhaust bracket was not long enough, but I was able to install it by installing the bracket near the with Gasket very loosely and tightening it after applying the bracket. I am glad that I was able to install the bracket, although I feel that it is not the perfect size.
There was no Instruction Manual for handling, but it was Large sturdy.
How was your experience with it?
I chose it for its looks, but when I actually installed it, I thought it was even cooler than I had expected.
I'm a little worried that the bracket part is not the right size, but so far I have no problem with it.
The sound was quite loud. It's not like an explosion, but the sound was on a level that might bother the neighbors.
I would have liked it to be a little quieter.
[Included Parts:were they on?
There were none in particular.
[Was there anything that disappointed you?
The size of the product is not Exactly, and there was some uneasiness when installing the product.
It is a conforming product, so it should be fine, but I wish it had a more Exactly feel to it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY
Focus on appearance
It is not easy to get out of the 106cc.
Look good!
View detail
I like the sound of Idling.
As a CHALY rider, I would love to have this Aardvark.
I had no trouble with Exhaust System,
I couldn't help but notice those popping mid-high notes.
And I had to buy it because it ran out of stock quickly.
The Engine is multiplied by the Idling.
It is a Sound that is kind of fun.
I don't think it's suitable for turning Pushing
View detail
Deep sound
If you're looking for a deep throaty sounding exhaust system then this one is for you.polished stainless steel and quality welds and no leaks View detail
Fits: HONDA CUB Standard, HONDA CUB DELUXE, HONDA LITTLE CUB
At LITTLE CUB's Custom
Very clean weld marks.
The texture of the product is very good.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Large exhaust pipe
A cheap and good looking Chinese Exhaust System.
Silencer is almost a straight tube and a blast!
Exhaust System, I bought it because the exhaust pipe installation part is about 50mm!
I was wondering if the Silencer I have on hand would stick …
The slot had some rattling, but installation was OK.
Satisfied with the sound and the calmness of the sound.
Silencer from the original was a bit Mischief
View detail
monkey bike exhaust
what can i say value for money good quality postage wasnt to bad definitely would buy again and it sounds great from the land down under View detail
Monkey bike exhaust
The quality of the exhaust pretty good build quality not to bad fitment is a little off where the pipe slips on the springs which attach to the pipe are about 10mm short out of 10 i give the pipe a 8 out of 10 and i like the sound loud View detail
The finish is poor, the sound is not nice and the exhaust does not fit well
This is the first time I have not been satisfied with a product. The finish is poor, the sound is not nice and the exhaust does not fit well on the monkey. Invest in quality i would say, buy one over, takegawa, gcraft, kitaco etc View detail
Fits: HONDA GORILLA, HONDA MONKEY
เข้ากะทรงรถดีมาก..ส่งไว้..สินค้าคุณภาพดี.. View detail
Inaccurate installation and explosive noise
First of all, the hole accuracy of Flange was not good and it was impossible to install without machining.
Because it did not come off with the part Single Body even if it expanded the hole, it corresponded by forcibly putting it in the vice and expanding the hole with the Drill of 8mm.
The band of Silencer is too small or the bolt is too short, and it cannot be fixed with the bolt easily.
This was also installed with a lot of sweat by re-bending and pinching with Vise pliers.
The spring that connects the Silencer to the exhaust pipe is too strong and requires a lot of force even with a special tool.
There was a spring for the exhaust system that was a little bit long, so I used it.
When I run the Engine, the Idling state is fat and good sound, but when I start running, the sound is cracked and explosive.
They told me not to come home, so I put it back.
The sound is different for everyone, but the accuracy of the installation is quite poor.
View detail
Exhaust System for CHALY to Super Cub custom
Showa Retro's CHALY ATSUNOCO Exhaust System was installed on a Super Cub custom. View detail
Retro exhaust system is good
Exhaust System for CHALY with Bracket and Rear Brake If you modify the Switch, you can attach it to the LITTLE CUB, the retro and nostalgic twilights! Exhaust System best? View detail
Retro Tarsus Exhaust System at its best!
Tanaka Shokai's Exhaust System for CHALY to LITTLE CUB! I modified a bracket and put it on The exhaust sound is good, the looks is good, and the nostalgic exhaust system of the Showa era is the best View detail
Fits: HONDA MONKEY, HONDA GORILLA
Very good for the price However Normal stroke car is cost extra
First of all, it is a very beautiful baking color and Exhaust pipe Design ○ It's made of bar. I use it in 88? But the sound quality from Idling is an explosive sound Silencer part is a rough straight tube (Wooletc. No inside sound deadening material inside outer frame Punching tube only) Road clearance Dangerous equivalent explosive sound Is it easy to get out? But, BackFire does not happen and I do not mind rotating valley. However, I guess that this Exhaust System was produced for Stroke upEngine (Full length is long). If attached with NORMALCylinder length Silencer Bracket will not reach the Screw part of Rear shock as it is. To install it it is necessary to separate the Exhaust System from the vehicle body by about 10 cm to the outside. Move it from the shape and move it upward and install it Additional parts required Shock Top Extension Bracket purchase required. CylinderStroke up Vehicle and China EngineCOMP 110? ~ Etc. It seems that it can be installed as it is. Design exhaust efficiency etc.. Considering this gold amount is to buy it, but explosion sound (It sounds good) ? ? ? Those who are interested recommend purchasing Silencer which fits separately.. View detail
Fits: HONDA MONKEY, HONDA GORILLA
Like this..
Bolt used for Silencer hanger should prepare in advance.
Gasket to be used for Engine cylinder side should be prepared in advance.
Spring pulling the Silencer why I lost it while I was driving one way.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Exhaust sound sounded Large bigger than I thought but it was almost satisfactory
MINIMOTO's 125cc KitMotorcycle is attached. I was looking for an Exhaust System that meets the following conditions as much as possible.
? 125cc compatible exhaust sound quiet Exhaust System
? Design of Double end
<Option>
Originally, DoubleEnd Design had the SCRAMBLER of DAYTONA before, but since it has become out of print a long time ago, it was inevitable that there was only Tanaka Shokai's Normal lookDouble endExhaust System - - -
So when I contacted Mr. Tanaka, I was quiet as to the sound, but when I installed it on 125 cc, the exhaust sound is still inevitably Large. In addition, it was said that there are cases where processing is necessary for installation.
<Exhaust sound>
The Exhaust System (Manufacturer unknown, probably Chinese made) It was really nice to have trouble in the neighborhood so it was really good with the JMCA Correspondence, but since it was that the Exhaust System was quiet in the first place, we decided to buy it because we could not keep it.
As for the exhaust sound, Idling got quieter than the one I used until now because of the bass. But still it is a reasonable volume.
As I use it, I feel that the volume will be getting louder a bit more. The exhaust sound was Large as I imagined.
I gave a video on youtube but the real thing is a little noisy feeling.
https : / / youtu. be / dLo6jsR47xg
<Looks>
The looks are cool. Even with the Standard Type, the end is Double, which is quite different.
Just thought that the angle is a bit closer to parallel, but the rear is going up slightly. For that reason some Bolt and Exhaust System come in contact after installation.
Once again, the Exhaust Guard will hit the thighs of the Right feet. However, it is not hot. I have never taken a Normal monkey so I do not know, but is normal muffler like this too?
<Price - Quality>
Regarding prices, we will weigh less than other cheap products made in China. Quality is conspicuous and not a good translation, it is the same with other Chinese made Exhaust System etc.. I feel it.. For that reason I think that the price may be a little cheaper.
As for the durability, I do not know it because it is still using about 2 months or so.
<Mounting>
As for installation, it was thought that processing was necessary but it was possible to install without processing at all. Instruction Manual is not included at all, Exhaust SystemBody, Bracket, Gasket only, but since we only remove and replace Bolt, ordinary people will be able to do.
However, since it is for Mono Suspension, I think that it can not be installed if Double suspension is processed.
<Overall evaluation>
Although it was said that there are few options in the first place, we are generally satisfied. But I personally think that it was good if the price was less than 10,000 yen.
I think that the end side is rising slightly.
Exhaust End shape
Bolt and Exhaust System interfere.
View detail
The deformation of Pipe
Although it is an exhaust system of 2-pieces Structure, deformation was intense both on the side of the insertion part and on the side of the silencer and it was possible to install it by forcibly turning after forcibly pushing in. Manufacturer inspected it, but it is impression that it is still made of Large land due to being a good product.
Wae Big's response was good with Smooth Tanaka Shokai's quality was disappointing.
View detail
It is almost satisfactory product
First of all, from a bad point.
In a rare case the exhaust sound is Large!
It can not be helped because it is a straight structure.
If you do not mind the volume - - -.
one more point.
Because it is close to Brake hose and Rear Fender,
I feel that trouble will come out later if I do not take measures against heat shield.
Although overall construction is not polite,
Because it is a beautiful finish, it is excellent in Cost performance.
Even though it is unlikely that Torque is spoiled compared to NORMAL,
The elongation of high rotation still exceeds.
Torque fully than Short Type Down Exhaust System.
Later on for yourself Baffleetc. If you can make it cheaper shopping.
View detail
Fits: HONDA ST90 (ST90), HONDA DAX, HONDA DAX70
this Chinese exhaust have a shitty welding job, my best advise is stay away from this, have a nice fking day everyone //.^
this Chinese exhaust have a shitty welding job, my best advise is stay away from this, have a nice fking day everyone //.^ View detail