Reviews
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
When driving on a public road, it broke and the entire TOPCase fell.
Bought MD47 used, previous owner new car. (Jun. 21) The RrCarrier that had been attached to the GIVI TOPCase since the first RrCarrier was used as is. As a result, the Pipe broke from the vicinity of the joint with the car body and fell down with the entire GIVI TOPCase at a mileage of less than 9,000km. The use situation is as follows
1.Fitting:GIVI MONOLOCK Case E260 Series Item no. 68033 + Universal Repair Base Part for GIVIMono-lock Item no. 31335
2.Luggage in TOPCase at the time of the fall:350cc plastic bottle with 1/3 of the drink remaining, glasses case, 6 L-Type Hexagonal Wrench
3.Weight on the RrCarrier at the time of the fall:3kg for the TOPCase, 100g for the 350cc plastic bottle, 50g for the glasses case, and 300g for the L-Type Hexagonal Wrench. Total weight:over 3.5kg.
The steel Pipe is 16mm in diameter and has a t1.5mm, so at that length it would have swung and the stress concentrated at the base, causing it to break.
It is not recommended for touring with a big TOPCase, which requires 2 people.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
The 1st Touring peeled off to veRAN veRAN.
One week after the application, the Sponge layer was used for long touring and it was found that the Sponge layer had a Quantity:Pair (for Left and Right) Both are peeled off and bella bella.
Knee grip was slipping and dangerous during Brake.
View detail
Not compatible with New ModelW?
I co-mounted Bracket to Headlight to install it on my 2020 W800. However Are we getting to the plating parts?" I tried to match the outer plating parts of the Headlight before the main assembly, but the VisorBody hit me and I could not install the VisorBody.
I spent about 2 hours adjusting the mounting position of the Bracket and Headlight, but the Bracket seemed to be not long enough, and no matter how I tried, I could not install it, so I gave up and put the Visor back without it.
I was relieved to see W800 in the list of compatible models, but I wondered if it would not fit the New Model.
I thought about installing only the Bracket first and then the VisorBody later, but even so, I gave up because I thought it would run into the Plating parts of the Headlight.
I was disappointed that a $5,000 item, though inexpensive, went to the Garbage bin.
View detail
Parts missing
I went to the local post office yesterday to pick it up after work, brought it home and opened it.
The fins on the Fog Lamp were missing.
View detail
You should buy a DAYTONA conversion Spacer.
I think the outer circumference is Cut-out accurate.
However, the edge surface is gouged and anodized without Edge treatment, so it is dirty.
Also, the holes for the fixed bolt are off-center and do not make a nice circle when combined.
In addition, since a thin Screw is cut directly into the aluminum, it will almost certainly lick if you try to tighten it to the point where it will not rotate.
I would much rather buy a Daytona Φ13Pipe conversion ClampSpacer (https://www.webike.net/sd/23697712/) than buy this. This is just an expensive Garbage. The proper price would be about 1500 yen.
View detail
Fits: YAMAHA Bolt, YAMAHA Bolt, YAMAHA Bolt CSpecifications, YAMAHA SCR950
Screen interferes with Headlight.
This is the third Screen of this Shop.
As usual, I bought the Universal Product, processed it, and thought I would install it.
I bought a bolt SCR for my car model.
The Screen interferes with the Headlight part though it installs according to the manual.
The diameter of the headlight is not correct, I tried to adjust the bracket to see if I can install it but it is impossible.
After all, the same as Universal Product, the Screen part which interferes is processed Cut and used.
If this is the case, it might have been fine with the 3000 china item.
Not sure if it was the wrong part that arrived.
Fork MountingBracket, but this one is about 3 stars. It's not a model specific easy install.
It is about the overseas Other Brand Product in the Showa era.
View detail
Cannot be installed. Cannot be used.
After I received the product, I tried to install it at a later date, but I don't know if there are different screws in the parts or what, but anyway, the screws are not tightened or fixed. The screw keeps turning. When I looked at it carefully, I found that there were only 4 screws in it and no parts to fix it, and there were only holes in the body.
What's going on?
View detail
Handmade?
I wore it on my old Grom Initial Model.
I remember buying it because of the low price.
My first impression is that you're an amateur with a heated Acrylic plate and plastic surgery?
Visor is Quantity:Pair (for Left and Right) It was an asymmetrical piece of shoddy work.
There is almost no windbreak replacement, and the lack of proper shaping in VisualUp Objective Items is fatal.
I don't know about the current products, but because of this, I personally don't recommend the Manufacturer here.
View detail
Wrold Walk Z900RS Exhaust Guard
First of all, there is no installation instruction manual.
The diameter of the body is too thick, so it cannot be installed depending on the shape of the silencer.
I was relieved because it was for Z900RS, but I was disappointed. By the way, the silencer is Yoshimura's Bure Screw (Slip-on Silencer Type), but the clearance was not enough and the silencer was slightly dented.
If you are considering installation, you need to check the clearance between Body and Silencer.
Satisfaction points are …
I don't have anything in particular to say about this, but it might be good for dress-up purposes.
The high price is unknown because it is not … rolling.
View detail
Bikini cowl mounting
There is a lot of gap between Cowl and Headlight, maybe it doesn't fit New ModelREBEL. View detail
nowadays
I don't think this is the right build, it was painted without any post-treatment after removing BALI and PRESS I ordered it for touring from next week I don't know about painting, but I'm not sure if you can paint without treating BALI or punch marks like this, and you're not going to be able to do it I'm sure it will come off soon It's a terrible product for the first time in a long time; GIVI, KRAUSER, SW-MOTECH, etc., etc., overseas This is the first time I've purchased this type of product before and it's the first time it's been bad I really want to return it, but I have to use it because I have plans for next week Really disappointing product View detail
The Concept is outstanding! But the quality?
I think it's great that they are available for each car type so I don't have to worry about installation
Because the bar can be moved freely, there is a high degree of freedom in positioning
Concept so far has been good, though
First of all, the Screw to fix the Clamp to the Bracket does not go in straight, so it is not possible to fix the Screw to the Bracket at any place Even if I tightened it up to the point where I could not secure it firmly
In that case, the paint on Bracket and Clamp came off
I thought it was defective and asked the manufacturer via Webike to replace it, but
Original text below
=============================
Thank you for your help
The vehicle you inquired about is a compatible model
The content of your inquiry
The lower part of the clamping area is not processed roughly and cannot come into contact with the bracket in a straight line
Screw does not go in straight because the screw hole under the clamp is distorted
That's why the included WasherQuantity:It is not possible to fix the Clamp section to the Bracket section with about 1pc
We have verified the images with respect to the fact that the product is within the product tolerance
The paint on the Mirror Bracket section peels off easily during installation
This depends on the customer's method of installation and use
You've contacted us to request an item exchange
The products we have in stock will be similar in quality, so we will not be able to offer you the same
We do not believe we can provide products that will satisfy our customers
It is possible to return the product
Thank you for the above information
==============================
I received a reply, "I'm sorry, but I have to return it
The range of product tolerances is so wide that some of them cannot be used in fact only with Included Parts:How is it that there is?
View detail
Fits: HONDA FORZA(MF10)
Defective in both design and manufacture
The mounting hole of the FORZAMF 10 Rear spoiler is 6 mm lower than the rear in the forward direction, but the four attached Attachment is the same Length. Therefore, if you attach Base with this, it will tilt forward. A wedge-shaped gap is created under Base. This is a bad design.
Since the painting was not perfect, Red rust came from the welded part due to rain of the day. Also, Red rust came out where paint film was removed by Bolt tightening.
After all, I purchased multiple M8 × 70 Stainless bolt and Nut, spring seat gold, plain Gold, (Do not use attached Attachment) Adjusted ScrewLength with Hand grinder and installed firmly. For rust, I painted it with Black car Paint.
The iron bar on the outer periphery of Base is φ 10 mm, the middle part is φ 8 mm. If the base of the installed box is on the outer circumference, you can step by step. I attached the Mono-lock base of GIVI, but because it deforms due to the step, I put the 3 mm thick Aluminum board inside so that the Mono-lock base became level.
Carrier to some extent has tools and for machines with processing technology.
View detail
Fits: HONDA VTR250, HONDA VTR-F
You had better not buy it.
I was surprised to open up! On parade of indentations, indentations on each part! Grabbed bad goods!
It might have been designed by this Manufacturer, but it was a miserable product to see how much production is overseas.
Excessive quality that can not be experienced in Japan.
With such a low quality, 24,000 yen over (Gold amount when purchased) Is too high.
Although I had you exchange it immediately, the product newly sent was slightly better than the first one. Detail Wound and Anodized flakers ... Clerk of the shop to be installed also saw the real thing and it was a donation!
The procedure of exchange is also troublesome, even if you exchange it, it is likely to repeat the same thing so I gave up. I was hoping for Manufacturer's name as WorldWalk, but I can not trust it because I am disappointed at all.
View detail
Windproof Screen
Unfortunately, this WorldWalk Universal Wind Screen is a bit of a heartfelt product to Recommendation, so we will not recommend it.
First, Screen is 5 mm thick and is very heavy.
Mounting Gold goods are also heavy and strong, but making is rusty and rusts soon. (Black part)
Plating parts are rust resistant, but Plating is easy to peel off, so rust will come out where plating peels off. (I do not know how to not rust). )
Well, I attach this installation gold item to Handlebar or Handlebar Brace, but even if I tighten it to Solidly like my parent's enemy, Screen part will inevitably shake up and down due to vibration during running.
When Screen shakes, Wound hits the bottom part of Motorcycle 's Screen.
Of course, Screen is Material : It is Acrylic so it will be frustrating.
It is probably a miso at the time of installation whether to fancy this Screen part in the air so that the dimensions are sufficiently lower at the bottom.
I do rust or shake, but I think that we can safely install this WorldWalk Universal Wind Screen.
I am HONDA's CRF 250 L, but I am able to successfully install this WorldWalk Universal Wind Screen.
Because it runs off-road, it is true that this installed WorldWalk Universal Wind Screens sway up and down, but even if it is not a mountain or off-road it will be a gut by Convenience step and this WorldWalk Universal Wind Screen will shake very much.
Even if it shakes very much, there is nothing to say without hitting it. Large Strong.
There are a few difficulties with installation, but since the original windproof rain protection effect is proportional to the large size, this WorldWalk Universal Wind Screen is quite Large so it is a Level that can be expected with the effect.
Sometimes it is likely to be pushed by the wind in the Screen or it receives the wind diagonally at the Screen and it may take the Handlebar with the crosswind but it has not yet fallen down by the wind so this WorldWalk Universal Wind Screen , It may be the Screen area to the extent that Large is not too large with respect to Honda CRF 250 L which I ride.
I also thought of trying to make Large Yu Size a bit more, but now I am satisfied with this Size. (Lol)
.
View detail
Heavy, but World WalkUniversal Wind Screen
I have added HONDA's CRF 250 L to this WorldWalk Universal Wind Screen (Clear) I installed ws-02wc.
I also thought that it was a little Large before installing, but actually it may be just a little or a little Small.
This WorldWalk Universal Wind Screen (Clear) I am satisfied with the windproof rainproof effect of ws - 02wc, but it is not to pass the wind, this WorldWalkUniversal Wind Screen (Clear) There are probably places where ws - 02 wc is received on the surface, so the wind is heavy and it often rides on Handlebar.
Previously, I attached a medium size Shield with Poly carp, but I was running as if I could exchange winds and divide it into the wind.
The above-mentioned Shield, this WorldWalk Universal Wind Screen (Clear) It is not possible to compare with ws - 02 wc because the shapes such as Large Ki and Earle are different, but as the area where the wind hits vertically increases the windproof rainproof effect increases proportionally, but if there are many vertical faces It will be caught in the wind so it will be hard to drive and it is inevitable fact.
So thinking, my Motorcycle (HONDA CRF250L) To this WorldWalk Universal Wind Screen (Clear) It seems that the wage of ws - 02 wc was just right.
There are also many negative Riders saying that Wind Screen and Windbreak Shield are bad (Previously, I was one of them. ) In fact, if you enjoy the effect even once, you will not be able to forget to realize the effect.
As you probably know many people, Rear box and windproof Screen can not be removed once attached Items among the Rider is a product whispered in truth.
This WorldWalk Universal Wind Screen (Clear) Ws - 02 wc is a little oblique, but a planar plate material : Acrylic Shield, unfortunately the weight is heavy because there are also 5 mm thick.
The molding condition and finish of the Gold parts that support the heavy shield part are also products that are not so good to be honestly good, but because Front has become heavy due to the fact that I bought it, I used it as it is Then this WorldWalkUniversal Wind Screen (Clear) I am enjoying the effect of ws-02wc.
Since it is heavy, I will not recommend it as a priority but it is not a product to deny with casualness.
.
View detail
Rally Car Spec. Required Windproof Screen
【What made you decide the purchase?】
Previously I attached a convex 2-stage Shield made of polyca, but I wanted a height of about 10 cm so this WorldWalkUniversal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) I purchased and tried installing.
【How was it actually used?】
As the plan was able to secure the height of the shield as planned, it became difficult for wind to hit directly on Helmet and the Wind Cutting sound drastically decreased so the inside of Helmet became very quiet and sounds around me became well heard, Direct winds to the wind has also decreased, so fatigue during long distance travel has also drastically decreased.
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) 1. Since there is 6kg, as it is combined with the resistance of the wind, it will be applied as an unnecessary load to the Front part, so the operability has been extremely lowered, but on the other hand the comfort during long driving has improved significantly.
【Mounting was difficult?】
It is not particularly difficult.
It is easy to install.
【Please tell me the installation point and hang】
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) 1. Because it is heavy with 6 kg, please drop off carefully so that the Acrylic board will crack if you drop it during installation so please do installation work.
[Is there anything I was disappointed about?]
Unexpected weight (1. Because it is 6 kg), handlebar operation becomes dull when installing on Front.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought it was JAPAN and purchased, but because too much making is too rough, it is not produced by FOR JAPAN MODEL.
Since there is no notation, I do not know where the product is maid in.
Please write in the country of manufacture.
【Have you compared items?】
This WorldWalkUniversal Wind Screen published in other sites [ws-02wc] (Length 380 mm, width 310 mm) We compared it with products that are cheaper than the 20% similar Universal Screen.
After all, Webike and this high WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) In fact, it was shock that the acquaintance friend later taught that the same product as just another 20% cheaper Universal Screen of the other site is different from the seller.
.
View detail
★ Reduce fatigue ★
【What made you decide the purchase?】
I could install it in my Motorcycle and I bought it because it seemed to be solid with the Large condition of good condition.
【How was it actually used?】
The area that receives the wind got bigger than the Small convex light weight polyka Shield that I was using earlier, so you can feel the resistance of the wind received by Shield while driving while using Handlebar operation and Accelerator operation.
The windbreak effect proportionally increased as the area became wider, the Wind Cutting sound corresponding to the Helmet during running almost stopped, the inside of the Helmet became very quiet.
Also, since the wind hitting the body also decreases, heat loss decreases regardless of the season and fatigue decreases from before installation.
【Mounting was difficult?】
This WorldWalk Universal Wind Screen [ws-02wc] It is easier than expected as it only wears Bolt-on to Handlebar while checking the height and angle.
【Please tell me the installation point and hang】
This WorldWalk Universal Wind Screen [ws-02wc] Shield is 5 mm thick heavy Material : Since it is Acrylic, it will be chipped or cracked if it falls down so we recommend that you pay close attention so that it will never drop during installation work.
I used Gum Tape to temporarily fix it so as not to fall even if both hands were released, decided the height and angle, tightened little by little and fixed it to Handlebar.
Also, when attaching parts to the Shield, use the force sandwiching Screw and Nut to sandwich Material : Please be careful not to break Acrylic's Shield.
[Is there anything I was disappointed about?]
I regret about Material : AcrylicShield is heavy. (1. 6kg)
Used Bolt and Screw rusts soon. Before installation (At opening) It was a bit rusty from.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Thickly (5mm) Heavy flat Material : AcrylicShield thinly (2. 5 mm) It is a desire to evolve into a light R-shaped polycarbonate Shield.
I want the parts to be made of rust resistant parts.
【Have you compared items?】
It compared with WebikeMode's lightweight polyca Screen, but we gave up purchasing without fitting.
[Others]
During rainy weather, thanks to Shield, it makes it easier to secure some sight.
Of course, the rainfall from the front that you receive on your body is drastically reduced.
.
View detail
World WalkWorldWalk Universal Wind Screen
【What made you decide the purchase?】
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) I bought it because I like the affordable Large Kimi wind protection area and Universal installation method.
【How was it actually used?】
This WorldWalk Universal Wind Screen [ws-02wc] This made it difficult for wind to hit from the bottom of the Helmet to the chest, so it became extremely difficult to get tired when traveling on a long distance Touring or expressway.
Also, on a rainy day this WorldWalkUniversal Wind Screen [ws-02wc] The amount of rain that directly hits the Helmet shield has been reduced thanks to the rain so it became easier to see the front as it was raining.
【Mounting was difficult?】
Attached attachment By just looking at the thing, it was very easy to install because it is a simple installation design enough to understand the installation method smoothly.
【Please tell me the installation point and hang】
Temporarily tightening Screw and Nut of each part, this WorldWalk Universal Wind Screen [ws-02wc] To the angle and position of your favorite little by little.
Since the Wind Screen part is heavy, please work while paying attention not to drop it.
I temporarily fixed the Wind Screen part securely so that it does not fall to my favorite position by using Corrugated cardboard or gum Tape, and then fastened Screw and Nut of each part little by little and fixed it as Firmly last.
[Is there anything I was disappointed about?]
This WorldWalk Universal Wind Screen [ws-02wc] Material of : Acrylic's Wind Screen has R but it is a plate-shaped Shield, so it catches the wind more than I had imagined, so I feel that Handlebar is heavy and drizzling a bit..
【Hope for Manufacturer - Please let me know if you have any improvement points]
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) Let's measure the weight of 1. There was also 6 kg.
Material to flowing water : Acrylic Shield 5 mm is heavy. The future is a polycarbonate thickness 2. Can not improve to a lightweight Shield of about 5 mm?
【Have you compared items?】
Because we could not install it, we abandoned it, but compared it with WebikeGarage's lightweight polyka Shield.
.
View detail