Reviews
Satisfaction is high
We installed in VRX 400 ROADSTER.
I got lost as GUYRA Shield, but place importance on appearance and select this closer to NORMAL. It was easy to install and it was around 10 minutes. The appearance after wearing is not too much Large, I like it.
Although it is effective, we do not feel much change on the general road. On the expressway, the body trunk, the resistance from the chest to the lower side is weakened. Adjusting the mounting angle may make a difference in the effect. I would like to try various things from now and find the optimum angle.
View detail
Design is Parenthesis nice
Design purchased because it is Parenthesis. Installation also ends in 20 minutes. Windbreak effect was generally as expected. Usually I went to PCX with Han Cap, so the tears came more than usual with the feeling that the scene was just looking at the line of sight. But if it is Helmet with Shield, there is no problem. View detail
Easy to use
I decided to purchase RearBOX because my helmet does not enter Helmet in PCX.
Although it was rounded as RearBOX's visual image, this BOX is different in shape from the others and is Cool, it seems to be solid and solid, furthermore with Inner Mat's bonus, and the best The ease of opening and closing, opening and closing with one-touch is very easy, the only thing I was concerned about is that it is impossible to tighten Bolt unless you set the Carrier diagonally in the middle of the Carrier installation.
View detail
Large Yea thing is good thing
I was satisfied with attaching Small Type Screen to CRF 250 L
If you want a more comfortable wind protection performance and you start looking for the Large Screen
I noticed that there were many people who attached this product in the same model car.
Ws - 03 which is bigger than ws - 02 further got lost as the windbreak effect also seemed high
Heavy with ws-02 - - With the information on the eyes, I decided to suppress the desire.
When the product arrived and tried taking it in the hand it was really heavy so it was a correct answer.
I tried to install without removing ETC with Handlebar around
It was impossible.. You can work on Smooth once you remove it all.
In my case, since there was a Bracket for Small Type Screen in Visor, divert it
Mitara Firmly I was able to install.
Even in the area lower than the speed which I was expecting for surprising when I actually run
Comfort is surely up..
The influence on Handling due to weight increase around Handlebar is a little
It is easy to fix by the grinding level.
I feel like working in good direction on stability and vibration in high speed.
Overall appearance also does not destabilize the balance with the car body, excellent effect for reducing fatigue
I am satisfied that I was able to do shopping good for Large.
Aside from that, I used to smoke at Smoke and I was afraid of having poor visibility
I made it Clear this time. Once I tried running at night, I thought it was a correct answer.
View detail
That's enough.
Naked motorcycleUniversal windshield is now cheap so you can buy it.
Good design, well built, good price.
I have not found any dissatisfaction in particular.
I tried Bikini cowl and Shield a lot, but I finally settled on this.
There is no special excellence, but this is enough.
View detail
I took a chance and ordered the World Walk Universal Neo Classic Meter Visor for my 2002 Triumph Bonneville. I've ridden my bike with large OEM windscreen that block much of the wind blast, and also with no windscreen which becomes very tiring even af
I took a chance and ordered the World Walk Universal Neo Classic Meter Visor for my 2002 Triumph Bonneville. I've ridden my bike with large OEM windscreen that block much of the wind blast, and also with no windscreen which becomes very tiring even after a 20 minute ride on a windy day. The OEM windscreen is effective, but looks ugly and breaks the form of the bike. This mini World Walk windscreen fit perfectly for my Bonneville. Installation was easy and deflects much of the wind away from my chest up to 75-80 mph. View detail
Mounting on XL 883N
I wore a Meter visor, but the running wind suddenly received HelmetScreen so I replaced it with a Large Visor.
Helmet Because the wind escapes from the top, traveling became even more comfortable at high speed.
View detail
It is not cheap, not bad
I was looking for Shield or Bikini cowl because it is exhausted by wind pressure at high speed Touring, but I have never got on a car with Cowl, so I looked for a product with a good amount of money even if I failed. This Shield is raised as a candidate Was. The result was Large correct answer. There is a reasonable effect without flashy, cheap. Handling Instruction Manual Easy to understand without seeing it. (Simple)
There is less distortion than I thought when I entered sight.
View detail
It is a highly satisfactory product.
I found this item looking for Screen that will not break the image of W800. W, SR only for singing, I think that installation is not difficult and Fit feeling is also high. You can expect durability because there are so much thickness.
The impression of high-speed driving can avoid the wind which corresponds to the chest, but the wind from the shoulder to the top, the arm, the point is that the wind to the part where the screen can not be Covered can not be alleviated naturally. Considering the character of the car should be considered a sufficient effect.
I was satisfied with COSPA as I was able to purchase it under 5000 yen.
View detail
Mirror Adapter is required separately for CB 400 SB
Until now I was wearing Zeta 's Armor Handguard Bend and a dedicated Knuckle guard but I decided to remove them, so I bought this new Knuckle guard as a windshield.
Removing the Hand guard The reason for the biggest Large is Harness - Possibility of Damage to Wire etc..
Although it was a concern from the beginning of installation, since Clearance is quite severe and Harness passes through the outside of the Hand guard, if the Hand guard rotates with a fierce fall in case, there is a possibility of tearing Harness sort I thought.
If so, Lever is not damaged beyond damage, so I decided to remove the hand guard. I regret that I liked it.
Also, my reason is that my Sense has changed and resistance to these forms of Knuckle guard has gone away.
<How to install>
According to Title, CB 400 SB can not be installed with this product alone.
Instead of Bolt for tightening the Knuckle guard, separately M10 (Screw Diameter 10mm) The Mirror Adapter of Quantity : 2pc. Set is required.
I wanted to use OEM's blindfold Cap, so M10 → M10 Standard Thread Screw Adapter for height adjustment (1870 made by Takatsu) The was used.
In addition, commercially available M10 Rose Screw sold at Home center etc. is Pitch (Screw mountain interval) Although it fits, because the height of Screw mountain does not fit, it does not enter Mirror hole. be careful.
Mounting is easy, first with Mirror in the hole Material : Remove the plastic Blindfold Cap with Slotted screwdriver.
Place a Knuckle guard there, tighten the Mirror Adapter with a 14 mm Wrench, etc. and reinstall the blindfold Cap to complete it.
By the way, because this Knuckle guard is one point stopper, because it rotates and it is displaced during tightening, it is good to tighten while pressing with one hand.
CB 400 SB was able to be attached without using the attached extension plate.
When you fully lock the Handlebar, it makes slight contact with the Screen, but it does not matter as it bends a little bit.
Also you can hang Handlebar Lock before touching.
<Usability>
You can realize that it firmly protects the wind to the fingertip.
Of course it is helpless to the wind from the side so it is painful in midwinter alone, but if you combine with Grip heater you can run comfortably as before.
View detail
To soften the wind in winter
To relax the wind in winter - - -
Fitting to My Motorcycle as thought by oneself, when considering it as a material it was a very good product and eventually I got very satisfied with Styling like being able to soften the wind somewhat.
View detail
Image changes and windbreak effect is enough
First of all, if you have Hexagonal Wrench, Spanner, Phillips Screwdriver it will be completed in about 30 minutes.
As for the clamp for installation, it is tough to use the Rubber board as written by other people, so it may be better to paste the protective Seal etc inside to make the work easier when adjusting the position during installation.
Because I did not have Protect Seat, I pasted the Seat of Carbon Style for the time being.
After installation, I tried to raise Speed ??from 60 km to over 100 km in trial run, but in the abdomen - Wind pressure to the chest was almost unchanged so we can expect a sufficient wind protection effect.
It is not so much Large Size so it is not a hindrance to vision and the appearance is also changed so it is recommended.
In other Manufacturer there are other parts for installation with Visor, but I think that this product is all set and conscientious because it is this price.
Of course I am solidly making it.
Regarding parts such as Bolt, we are concerned about rusting in the future, but we will consider it at that time.
Anyway it was a good shopping (^^)
(Sumimasen elsewhere purchase)
View detail
I tried it directly.
I was wearing ws - 01 directly before, but because I was dissatisfied with Size, I bought this purchase.
Everyone, I think that you are using Mounting Bracket, but in my case I put too much around Handlebar and it seems that it will not be easy, so I tried it directly.
Since the position of the hole is different from ws - 01, I opened a new hole in Bodyws - 02, how is it? Does not it seem that there is not a big impact on NORMAL 's Silhouette?
For me it seems to be satisfied with both Size, color and function.
Although it is better if it is a bit cheaper ...
View detail
My neck became easy.
It is Motorcycle riding of cervical spinal disc herniation. I can not endure the wind pressure and think to attach Screen
If you are looking for, I found this this time, because I was cheap and looking at Large
I bought it. The result has a considerable effect The burden on the neck has decreased.
I think that it was good to install.
View detail
Mounting on XL 883R
It looks very good-looking.
I attached a Smoked visor to Black's XL 1200 C SPORTSTER 1200,
There is no sense of incongruity at all.
As for the windbreak effect, when it is over 100 km on the highway it is the effect Large.
I am very satisfied..
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
Bikini cowl by far the best recommended!
I was wearing it in the 2004 model GSX 1400 that I was riding the previous time.
Compared to other Bikini cowlManufacturer, World Walk of impression one step behind in popularity is impression,
The price is very conscientious to the quality of the product, personally it is by far the most recommended Items.
If you contact the model of the car body and Color code, we will apply it to nearly OEM compatible paint!
* I'm sorry, I bought from World Walk's official HP so I could specify OEM Color,
Is it possible to designate OEM Color when ordering from Webike?
Installation will be fixed together with Headlight Bracket.
Since there are only two Bolt fixation points, it can not deny that there is some rattling as it is called Universal Product.
Also, depending on the model, there is a possibility that Cowl and Meter part interfere.
In fact GSX 1400, Cowl was pushed by wind pressure, the Meter part was hit by hanghang.
However, such a thing is a story that can be done by curing with Cushion Tape, there is no problem on practical use.
Durability was also wonderful, I used it for 3 years, but there were no cracks etc..
Although rubbing with Bike Cover caused some rubbing scratches, it was not limited to this product.
Windshield effect is also high, Touring dramatically became.
For this product, a dedicated Decal is prepared as an option, and if you contact the year and color code there, OEM (As close as possible to) You can purchase Color's one.
Because there are so many kinds of Decal, I think that it is also attractive that you can design your own one-off design.
Those who have anxiety in that they are cheap to scorch compared to other Bikini cowls, this is not that they are cheap at Pachimono.
Quality that I am convinced that it is becoming cheaper by corporate effort.
If you are considering buying Bikini cowl, I'd definitely recommend this item!
View detail
XL 1200 C SPORTSTER 1200 Ride Comfort Up!
It installed in the XL 1200 X of the XL 1200 C SPORTSTER 1200.
OEM's Rear Suspension is hard on Solidly and the ride is the worst.
This item is comfortable riding in the city with Rear Suspension that emphasized ride comfort, I think that it is a product for User who wants to run the mountain road comfortably.
Where I actually installed it, it is exactly the performance as stated.
Privately I was satisfied with Large.
View detail
Simple to in stall once e holes are drilled or order/purchase of the rear rail cover from kitaco with already drilled holes.Within less than 5mins of installation.only thing is the max weight of 5kg load.Other than that,Fabulous!
Simple to in stall once e holes are drilled or order/purchase of the rear rail cover from kitaco with already drilled holes.Within less than 5mins of installation.only thing is the max weight of 5kg load.Other than that,Fabulous! View detail
I previously bought 2 box's from passwordjdm and the craftsmanship/fitment was terrible! I live in the United States and nobody I know has one has ever wrote a review on the world walk carbon box nor do I think anybody has purchased one. I was very scare
I previously bought 2 box's from passwordjdm and the craftsmanship/fitment was terrible! I live in the United States and nobody I know has one has ever wrote a review on the world walk carbon box nor do I think anybody has purchased one. I was very scared knowing it would be shipped across the world. When it arrived I was amazed of the quality and fitment!!! When your spending $500 on a battery box it should be! I will be posting build process on the total ruckus website once my build nears completion with detailed photos since there is not much online. THANKS WORLD WALK! View detail
The luggage carrier is well made. All of the hardware needed for fitting is included and only requires 4 holes to be drilled into the alloy ducktail on the Forza. This is easily done. The rack is a good width and I can now carry camping gear held done w
The luggage carrier is well made. All of the hardware needed for fitting is included and only requires 4 holes to be drilled into the alloy ducktail on the Forza. This is easily done. The rack is a good width and I can now carry camping gear held done with either elastic straps or rope. This is a great usefull product that makes long distance riding, carrying gear,much easier. View detail