Reviews
If you are prepared ・・・・
Exhaust Guard is as the name suggests, but this time we purchased it to reduce damage to the Rear Sets.
I compared various companies' products and decided to go with World Walk's product. The deciding factor was its length of 135mm, which seemed to be heavy and resistant to impact.
In fact, the weight without Bolt is 340g and Firmly.
I like the solid construction, the beauty, and the subtle World Walk logo on the tip. I like the logo of World Walk on the tip of the bolt.
I would like to have a color on the part of the tip that can be replaced.
View detail
A little bit
It looks slightly better.
I think the choice of GROM letter color is a bit of a Large thing.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100
This is a RECOMMENDATION for standing moss insurance!
[How is it used?
I purchased and installed this product to protect the expensive Exhaust System of my CB1100 as well as to reduce damage in the event of a fall.
Was the one you received as per Image?
It was heavier and more solid than the Image.
The base is cut-out aluminum, and the slider at the tip is moderately hard, giving it a high-end feel.
Was the installation difficult?
Installation of the Normal muffler is easy, as all you have to do is remove and replace the Normal muffler's mounting bolt.
How was your experience with it?
Since it sticks out quite a bit, it definitely protects the Exhaust System in the event of a fall.
WYVERN Exhaust with Silencer in the Large size range was also defensible.
Normal muffler may not suit Short Tube because Silencer is very Large and it is adapted to it.
[Included Parts:were they on?
Comes with mounting boltc.
The Slider part at the tip is also available separately for replacement.
[Was there anything that disappointed you?
It can't be helped, but the Slider here sticks outward more than the Tandem Footpeg in NORMAL.
Style is definitely lost, so I will use it for long toursetc. as an insurance policy in case of standing moss.
In the event of a large fall, the Footpeg Plate is also likely to suffer a large damage.
▼Quantity:Pair (for Left and Right) This is for the Both Sides Dual Exhaust System, so only one of the two is needed.:I would like to have 1pc.'s added to the Lineup.
View detail
Installed on XG250 TRICKER
High-speed cruising is now much easier.
The Visor part can be easily removed with a hexagon, so it can be attached or detached during off-road driving or when in the mood.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cute.
Pad thickness is just right and cute.
It would be better if it were cheaper.
View detail
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
No instruction manual included
There is no instruction manual. The collar and bolt are confusing, or rather, wrong. The "right side, left side" in the product description photo is "right side, left side" from front to back. The 150mm bolt and 68mm total collar are installed on the left side of the vehicle. The 115mm bolt and 33mm total bolt are on the right side of the vehicle. The tightening torque is 35 ft.lb. It was able to be installed properly on the American specification 451cc Eliminator. There is no instructions come with it. 150mm bolt and 68mm (55mm + 13mm) collar are for the left side. 115mm bolt and 33mm (20mm + 13mm) collar are for the right side. Tightening torque is 35 ft.lb. They fit Eliminator 450 and 500 too. Enjoy! View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
The thing with DURACON on the end!
I forced myself to put it on a VSTROM250SX!
The attached Screw does not fit, please refer to the second photo.
Installed better than expected, just fit!
View detail
Easy dress-up
I put it on for dress-up and to reduce hand numbness etc. I could have used Universal Product for just the tank side, but I wanted the SIDE part closer to the frame, so I went with this product. The material is thick and cushiony, and the adhesive surface is super strong. We are planning to go to Long to see the effect of reducing fatigue. View detail
It is a super Recommendation. Super convenient.
Underbone Frame cover for CT110 HUNTER CUB (where you straddle when you ride) is considerably wider and flatter than the SUPER CUB, and you will be tempted to load it with luggage! (Lol) So, I was thinking of installing a CenterCarrier, the so-called Vietnam Carrier. Although none of them seemed to fit the bill, I had narrowed down my choices and was about to order one when I saw this CenterBasket that a YouTuber had installed on his CT110 HUNTER CUB, "That's it! I was so peeved that I sought it out and bought it.
When you use it, it is super convenient! A little shoulder bag (8LiterSize in photo) Of course, if you hang the attached Small TypeNet on the top surface, you can put a PETBottle or something in it and it will not fly out. If it is just a CenterCarrier, you have to fix it with Net or Rubber string, but with Basket, you can put it in and it will not fly out. (Place) Only. This convenience is addictive.
The only drawback is that I will not be able to straddle the Underbone, but I originally straddle the Rear cargo bed like a normal two-wheeler, so it is not a MinusPoint for me.
Also, I am putting a twist on this Basket by placing the Helmet on it, so the Frame (Made of iron) The top surface of the helmet is covered with double-sided tape and cut to a suitable large size and attached to the top surface of the helmet to prevent scratches on the helmet.
View detail
countermeasure against standing up
Installation is easy
I expect that Damage at the time of the fall will be limited to the smallest limit.
View detail
For dress-up purposes from OEM
[How is it used?
I was looking for a non-OEM Exhaust Cover because the OEM Exhaust Cover was dented in a fall, so I purchased one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I also purchased the OEM 18293-MN0-000 and worked on it.
How was your experience with it?
I am concerned about the clearance and strength of the hooking area with the Exhaust System side.
[Included Parts:were they on?
BrandSticker and other Included Parts:were all included.
[Was there anything that disappointed you?
That Sticker didn't put it up, even in a good way. (If you want to use Carbon fabric as it is) I thought the Brand logo was stuck on the product image without any border, not Sticker, even in a bad way.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
comfortable tank pad
About quality and texture : very comfortable and soft About the feeling of use : increases our grip during rides Products to buy together : none Difficulty of installation : very easy, just remove stickers and stick to tank Cost performance and comparison with other products : higher price due to good quality About shipping and packaging : neatly packaged, fast shipping Any concerns, cautions, or advice when purchasing : clean the tank surface before apply tank pad View detail
Design is fine, but ...
We like the design and use AERO Type.
My MONKEY125 is overdriven and travels about 20,000 km per year.
The car is 99% on road, so it is not running in a place with severe vibration, nor is it experiencing abnormal body vibration due to breakdowns, etc.
In fact, this is the third one I have purchased, because after 10,000 km or so, the area around the mounting point is cracking.
1pc. eye near the mounting Quant.:Pair (for Left and Right) The second time, the Right Side crack was quite large when viewed from the front and was repaired once, but as a result, the cracks expanded and became larger and larger.
Therefore, this time RType was purchased as Repair Parts because it is cheaper, and the original AEROScreen was transplanted.
I would like to see a little more durability, because I can't easily cheat on my MONKEY125 with another Bikini cowl, as it has become the identity of my MONKEY125.
I think it would be good for owners who are not over-driven like me, so if you like the design, you may purchase it.
View detail
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
Unfortunately, the length was good but the shaking while driving was not calculated.
Since the Meter on MT-07 is directly above the Handlebar, I wanted to place my phone and Car Play Monitor on the upper side of the Meter, so I chose this product with a longer bar length.
The length was good, but the Mirror mount bracket was not able to support the weight of the phone and CarPlay Monitor due to the Bolt1 pc fastening, causing it to shake considerably while riding. As a result, I moved the length of the bar to a shorter length so that it would be closer to the fulcrum. Since it still shakes, I am planning to change to a Bolt2-Bolt Type of Master CylinderClamp from DAYTONA and others.
View detail
It can be installed on 24 years model without any problem.
When switching to the ZX-6R, I was considering where to mount the Smartphone Holder and USB power supply, and I chose either KITACO or WorldWalk's mounting bars. I chose the one from WorldWalk considering the possibility of installing an OEMSteering damper in the future.
Although there was no information on the compatibility of the Top Bridge with the 24 model, we compared images with the 23 model and decided that there would be no change in the Top Bridge.
View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail