Reviews
It is active in our Garage!
Our home-made Garage is 8ft×8ft in external shape.
There is Heat Insulating Material&OSB plywood on the interior plus a doorway, about 230cm deep.
I was going to put the 250TR straight in, but when I put it in, it is not parallel to the wall….
No Space to switch back and forth….
So, a triangular Dead space is created.
I was wandering around the Net looking for a better way and came across this product.
I thought about buying a new one, but when I looked on Mercari, I saw it for sale at a discount price, so I bought it. (It was used, so I don't mind if it had some Wound/Rust.)
How to use,
(1) Put the front wheel in deep enough to hit the back wall.
(2) Stand the car body on the Side Stand.
(3) Insert the Motorcycle Mover into the rear wheel.
(4) Raise the vehicle and push the Motorcycle Mover in with the Right foot.
(5) The body of the car is completed standing on the Side Stand!
It was a little strange to pull the Garage until I got used to it, but this product eliminated the Garage's dead space and made it possible to use the Garage more spaciously.
I'm glad I bought it
(Unfortunately, the Center Stand for ESTRELLA, which we went to the trouble of attaching, is no longer usable due to the lack of a draw allowance in depth …...)
View detail
Fairly easy to move
I used it to turn around in a tight spot and it was easy to use without much effort.
Rust is uncomfortable and difficult to move depending on the orientation of the Stand Mover on the Side Stand.
View detail
You'll get used to it.
Used on MT09, easy to use once you get the hang of it, but the price tag is too high. 10,000 or less is appropriate. View detail
Very convenient, but also requires caution
With the Motorcycle Mover, I can easily pull my 250kg lighter machine up against the garage wall. I don't have to push and pull the machine over and over again, which saves me a lot of time and effort.
The product is well built, rigid, and beautifully finished with a high quality feel.
However, there are some points to note.
The Motorcycle stand may be paid off while the Motorcycle is being moved in conjunction with Stand Mover.
Relying too much on Stand Mover can be dangerous, and I almost knocked over a Motorcycle once.
This can be prevented by installing the Stand Mover with awareness of its orientation and moving the Motorcycle slightly upright.
Because we are moving heavy objects, there is a certain amount of danger involved. We always try to handle them with care.
View detail
It's expensive, but nothing else will change that.
The price is quite distressing before purchasing, but if it can be moved freely, it will be easy to move in and out of Garage, and even increasing the number of cars is not a dream.
With this New Model, both the front and rear wheels can be moved, allowing for effective use of space.
I saw some reviews on the old one that it still had the Edge, but I guess it's good that it's made in Taiwan? There is no Edge and there seems to be no worry about scratching Boots.
I'm not sure about Merit, which increased the number of Bearings on Motorcycle Mover to three, because it allows you to move without grounding the Bearing under your feet when pushing and pulling. I think it is suitable for those who want to stabilize the bike and step on it as hard as possible, but for me, it is useless because it increases the resistance to ground contact.
I tried to move GSX1100SKATANA which is the heaviest body to move The Motorcycle Mover did not flex, and I could feel a sense of its solid strength, which was reassuring.
Subtle is the Stand Mover.
When using the Motorcycle Mover, the front or rear wheel is used as a branch in a circular arc, so the bearing of the Stand Mover is designed to roll in a slight arc.
It is good if you work from the Side Stand side, because you can push and pull it while checking, but from the Right Side where you can't see the Side Stand, you can't slide off the Stand. I am afraid that it will come off and I will fall off.
As a countermeasure, since the board is reasonably thick, I am thinking of making a tap, making a rip with AluminumAngle, and attaching it with Butterfly Screw. If you want the best, it would be better to laser-cut the plate into the shape of STAND and sew it (you need to know an ironworker who has a laser cutting machine to do this...).
A clean floor surface is a prerequisite for installing Motorcycle Mover. My garage is an office that originally had Linoleum flooring, so the concrete is rough and the rolling resistance is large. (I feel like putting a steel plate on it.)
I would like to ask WorldWalk to sell the Stand MoverSingle Body, because to pack the Motorcycle, you have to push it towards the Left Side, but it is difficult to retrieve the Stand Mover. I hope you can make this happen soon because I would like to have two more cars.
View detail
Useful for changing directions on a Motorcycle
I've been curious about it for a while, but I was hesitant to buy it because the price was too high.
Then I got an email about the Point expiry, so I ordered it.
Although the old one was cheaper, I bought the new one because I thought it would be more convenient to have a part to engage the Side Stand later, even if it was a little expensive.
All you have to do is bite on the Side Stand and Rear tire (or Front tire), step on it, and push or pull it.
If there are dents in the pavement, etc., it won't move.
Also, the handles and other Edge parts of the Gold genus are still firmly intact, so I had two injuries when I touched them somewhat randomly.
In that aspect, it's Minus, but it's certainly useful.
I have been using the Transporter for the Sambar, and recently, due to the lengthening of the Motorcycle, it has become necessary to stack it diagonally, and I thought it would be easier if I used the Motorcycle Mover, but as you can see in the picture, the sub-battery box and other parts get in the way, but it made moving it easier.
A Transporter that is fully usable and floorboarded with no sub-battery etc. would be much easier to utilize.
Added on Nov. 1, 2020
The handle came off, so I contacted the Manufacturer and they fixed it exactly.
Support also seems to be safe.
View detail
Does it take some getting used to?
The product is solidly built and lifts on Lever's principle
Pushing is Large sturdy, but I think it takes a little bit of getting used to pulling it forward
Our Garage is a little bit uncomfortable because the concrete of the floor is devoid of Decoration I guess
In the case of a large motorcycle, the Mover is also used under the Side Stand Quantity:The Set one might have been better
Anyway, I was satisfied because I didn't have to move the Side Stand while rubbing it forcefully anymore I am
View detail
Finish and strength are perfect
I used to have to turn the Motorcycle in and out of the garage multiple times to get it in and out of the garage with ease I can move my motorcycle to the wall and it is very convenient But it's better to have a Stand Mover when you're not used to it, because you don't have to worry about knocking it over You can move in Switzerland If you get used to it, you'll be able to move without a Stand Mover, but I'm not I'm glad I bought the Stand Mover
I think the price is so high that I'm hesitant to buy it I wish it was cheaper
View detail
It is a good product
For the winter, because it is indoor keeping, we use it in the back of the garage during the summer, because they are both narrow spaces, we use it to move to the prescribed position.
It is satisfactory saving the trouble of turning back, it is easy to handle and convenient.
STANDCaster is not used but there is no problem. welded part - Caster - Products such as Roller Department are solid.
View detail
It is added.
Motorcycle Shifter purchased with Single Item but I bought it along with the increase in Motorcycle, but it was easier and faster to store Motorcycle than there was not available.
I thought that it was better to purchase with Set from the beginning.
View detail
This is convenient
Movement in a narrow storage is impossible without this.
I was surprised to be able to easily move it.
I put a file and cleaned the corner I was interested in.
If the price goes down to 10,000 yen, I think that the evaluation can be full marks.
View detail
You can move easily.
I thought that there was also the effect of crime prevention I bought it to put 2 Motorcycle in the back of my home Garage.
I could relax and sort out on the wall easily. Although the pull needs a little hang, it does not matter if you get used to it.
Afterwards I think that the price is a little cheaper and still better.
View detail
Description ease of use as in video
I got on the CB 1300SB, but the turning point of the parking lot was narrow, it seemed like I was going to get out of riding with difficulty putting in and out.
Explanation There was anxiety whether it could be done according to the animation, but after trying it was able to do as it was. I did TRY even without STAND 's Caster, but I could not do it unless there was room for some extent. Perhaps the person who purchases this product is a narrow Situation, so it would be better if you purchase it with a Set.
Satisfied as a product. I thought that Cost was a bit cheaper.
View detail