Reviews
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
Mount bar
In the summer, the cell phone is free to shift, so we installed a mount bar to accommodate the GARMIN Navigation system. View detail
I still need … Smartphone Navigation!
What made you decide to buy?
Before I installed the KawasakiOEMOption Steering Damper on my ZX-6R, I had installed a KIJIMA Handlebar Mount Bracket, but it interfered with the Steering Damper. After considering alternatives to KIJIMA's Mount Bracket, we decided to use KIJIMA's Mount Bracket. WorldWalk:Smartphone Mount bar I met and purchased the product.
How was your experience with it?
Before purchasing, I was disappointed that there was not enough information about the WorldWalk:Smartphone Mount Bar for 6R. I have been using it to hold my cell phone for a long time. I used to use "Oxford:I installed the "Clicker /Handlebar Mounting for Motorcycle" and it is firmly in place and does not interfere with anything else. The OEMMeter is also clearly visible, although the phone can only be mounted sideways.
Unlike KIJIMA's Handlebar Mount Bracket, this bracket is mounted in the upward direction. I was impressed by the manufacturer's skill in measuring the mounting position to maintain a subtle clearance, but there were some disappointing points. The paint job of the bar clamp is perfect, but the finish of the HolderBody is a little bit rough. I thought that it was probably manufactured by a certain Large land … manufacturer. (As a personal opinion)
Regarding installation …]
Remove the OEMHandlebar clampBolt. Once removed, use the supplied aluminum collars to attach the bracket for fixing the holder. This is where the ad-vise comes in. The included M8 bolt is used to secure the bracket and aluminum collar, but if the bolt is tightened at the specified torque, the bracket will move to the tightening side, which will affect later work. First of all, set the quantity:Pair (for Left and Right) The Bracket for fixing the Holder on the left side is temporarily fixed. Next, temporarily fix the Holder to the Bracket for fixing the Holder and attach the bar. (At this time, there are two washers for the Holder. Since the clearance is delicate, do not use washers for temporary fixation, but use Bolt only for temporary fixation.) where the bar Quantity:Pair (for Left and Right) position adjustment and fix the bar firmly to the Holder. (The bar has a hole for drainage! I am at this time using theQuantity:Pair (for Left and Right) and adjusted the bar so that the hole for drainage faces down). After adjusting the position of the Holder and bar, we left them as they were, and set the Quantity:Pair (for Left and Right) Tighten the holder fixing bracket of the "2" at the specified torque. Finally, use the two washers that were removed from the bracket for fixing the holder at the position specified in the Instruction Manual, and tighten the holder with the specified torque. This work was a little difficult because there was not enough information about the WorldWalk:Smartphone Mount bar for 6R in advance, but the work was completed without any trouble. WorldWalk:Smartphone Mount bar is recommended.
View detail
thank you for good product
It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. do View detail
Fits: KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000
Firmly.
14mWrench for Mirror removal is a quantity.:I was unprepared for the 2pcs, but the work itself was easy, and the Smartphone Holder and Camera were also fixed perfectly. View detail
It can be used as an attachment bracket for various things.
Smartphone Holder and Power Supply Unit of SYGN HOUSE are installed.
I'd like to install ActionCam and Radar if I put it on One Side already.
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
Good Size
Nice size and easy to put on! View detail
easy to read
The smartphone holder and the smartphone holder have been installed on the meter and the phone is right above the meter while driving.
It may depend on the type of smartphone holder to be installed and the type of smartphone you are using.
There is a possibility of interference when the Handlebar is cut to full Left.
(The product does not interfere, but the Holder does.
I'm using iphoneXs and when I fixed it in vertical position with the Center, it interfered.
I had to install it in Left from Center.
It didn't interfere with the Center when I placed it horizontally.
I have given up vertical installation and use it only for horizontal installation.
(We wanted to make it look good with Center placement.)
Smartphone Holder:iH-520-STD
View detail
Very good!!
I'm very satisfied. The cost of caustic acid is very good, very good. I recommend it to those who are in conflict. It's quick to ship and I like the packaging. View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
Easy to install, Pittashi
We also made the same manufacturer because the windows screen also has the worldwalk. Since the hole position accuracy was good also on the screen, the mounting accuracy was perfect. I'm doing a good job.. View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
Universality is high
Unlike Mirror Clamp type, one using BirdCity's Windscreen Bracket. Select Mirror Clamp type because Mirror's roots look good..
Standard, Screen stop Bolt Material : Plastic, but Bolt attached to it is made of Gold genus so be careful not to get too tight.
Photo Quantity : 1pc. Eyes are attached with MIDLAND's Handlebar Mount and Smartphone HolderCH-01-A. Because there is not so much clearance, it may be difficult for a Type Smartphone Holder to be installed using a tool (Photo 2nd sheet).
It seems that you can also add USB power supply.
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155
As the line comes directly above the Speedometer it's great for Navigation Bracket.
Commercially available bars can not be visually inspected unless their eyes are down, but I think that it is good for Navigation Bracket as the line of sight comes over Speedometer. I searched for Kana like this. Before installing, I think that installation confirmation is good once. Please be careful because the back of Grommet turns. Can be installed simultaneously with WS - 17T. Cool View detail