Reviews
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
Unfortunately, the length was good but the shaking while driving was not calculated.
Since the Meter on MT-07 is directly above the Handlebar, I wanted to place my phone and Car Play Monitor on the upper side of the Meter, so I chose this product with a longer bar length.
The length was good, but the Mirror mount bracket was not able to support the weight of the phone and CarPlay Monitor due to the Bolt1 pc fastening, causing it to shake considerably while riding. As a result, I moved the length of the bar to a shorter length so that it would be closer to the fulcrum. Since it still shakes, I am planning to change to a Bolt2-Bolt Type of Master CylinderClamp from DAYTONA and others.
View detail
It can be installed on 24 years model without any problem.
When switching to the ZX-6R, I was considering where to mount the Smartphone Holder and USB power supply, and I chose either KITACO or WorldWalk's mounting bars. I chose the one from WorldWalk considering the possibility of installing an OEMSteering damper in the future.
Although there was no information on the compatibility of the Top Bridge with the 24 model, we compared images with the 23 model and decided that there would be no change in the Top Bridge.
View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
HONDA LEAD125
The fit is perfect and perfect.
However, I am a little disappointed that Hexagonal Wrench is not included.
Those who do not have it need to prepare it separately.
Also, depending on how the bar is installed, it may be difficult to see the Meter device if it is placed in front of the bar, which may cause some inconvenience.
However, Smartphone HolderQuantity:Pair (for Left and Right) I am satisfied that there is quite a bit of room even when fixed at both ends.
I'm glad I bought it!
View detail
The product itself is good, but the details are not so good.
I thought it was a good product because it can be mounted parallel to the handlebar at any distance, so it does not get in the way, and it allows for a sufficient length of bar to be effectively used.
However, the attached washer is a little small in outer diameter and not thick enough, and I am concerned about its strength when attaching the bar to the plate that also comes with the washer.
On the flip side, I could say that the Slide hole in the bar is too wide.
View detail
Surprisingly time consuming to install.
The car model is Exclusive Design, so it can be installed without interference.
Ideally, I would have liked to install it a little lower, but that was unavoidable.
I'm replacing the OEM Handlebar Clamp Bolt with the supplied Bolt.
It would be appreciated if the Instruction Manual could include the tightening Torque of Bolt. (OEMBolt is 25N?m)
I have read other people's (J.P.P.'s) review of the Large odd useful installation instructions.
I had a hard time tightening it as shown in the third photo because the Hexagon socket I had was too short.
View detail
Mount bar
In the summer, the cell phone is free to shift, so we installed a mount bar to accommodate the GARMIN Navigation system. View detail
I like that you can change the length.
Mirror mount was the right choice because it is difficult to install Bracket around Handlebar.
The height makes it easy to see your phone.
I was concerned about the fixation force because it moved no matter how hard I squeezed it, but it seems to be Large sturdy for normal driving.
bar to theQuantity:Pair (for Left and Right) It would be nice to be able to change the length by moving it to
View detail
I still need … Smartphone Navigation!
What made you decide to buy?
Before I installed the KawasakiOEMOption Steering Damper on my ZX-6R, I had installed a KIJIMA Handlebar Mount Bracket, but it interfered with the Steering Damper. After considering alternatives to KIJIMA's Mount Bracket, we decided to use KIJIMA's Mount Bracket. WorldWalk:Smartphone Mount bar I met and purchased the product.
How was your experience with it?
Before purchasing, I was disappointed that there was not enough information about the WorldWalk:Smartphone Mount Bar for 6R. I have been using it to hold my cell phone for a long time. I used to use "Oxford:I installed the "Clicker /Handlebar Mounting for Motorcycle" and it is firmly in place and does not interfere with anything else. The OEMMeter is also clearly visible, although the phone can only be mounted sideways.
Unlike KIJIMA's Handlebar Mount Bracket, this bracket is mounted in the upward direction. I was impressed by the manufacturer's skill in measuring the mounting position to maintain a subtle clearance, but there were some disappointing points. The paint job of the bar clamp is perfect, but the finish of the HolderBody is a little bit rough. I thought that it was probably manufactured by a certain Large land … manufacturer. (As a personal opinion)
Regarding installation …]
Remove the OEMHandlebar clampBolt. Once removed, use the supplied aluminum collars to attach the bracket for fixing the holder. This is where the ad-vise comes in. The included M8 bolt is used to secure the bracket and aluminum collar, but if the bolt is tightened at the specified torque, the bracket will move to the tightening side, which will affect later work. First of all, set the quantity:Pair (for Left and Right) The Bracket for fixing the Holder on the left side is temporarily fixed. Next, temporarily fix the Holder to the Bracket for fixing the Holder and attach the bar. (At this time, there are two washers for the Holder. Since the clearance is delicate, do not use washers for temporary fixation, but use Bolt only for temporary fixation.) where the bar Quantity:Pair (for Left and Right) position adjustment and fix the bar firmly to the Holder. (The bar has a hole for drainage! I am at this time using theQuantity:Pair (for Left and Right) and adjusted the bar so that the hole for drainage faces down). After adjusting the position of the Holder and bar, we left them as they were, and set the Quantity:Pair (for Left and Right) Tighten the holder fixing bracket of the "2" at the specified torque. Finally, use the two washers that were removed from the bracket for fixing the holder at the position specified in the Instruction Manual, and tighten the holder with the specified torque. This work was a little difficult because there was not enough information about the WorldWalk:Smartphone Mount bar for 6R in advance, but the work was completed without any trouble. WorldWalk:Smartphone Mount bar is recommended.
View detail
You should buy a DAYTONA conversion Spacer.
I think the outer circumference is Cut-out accurate.
However, the edge surface is gouged and anodized without Edge treatment, so it is dirty.
Also, the holes for the fixed bolt are off-center and do not make a nice circle when combined.
In addition, since a thin Screw is cut directly into the aluminum, it will almost certainly lick if you try to tighten it to the point where it will not rotate.
I would much rather buy a Daytona Φ13Pipe conversion ClampSpacer (https://www.webike.net/sd/23697712/) than buy this. This is just an expensive Garbage. The proper price would be about 1500 yen.
View detail
thank you for good product
It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. do View detail
For Scooter Smartphone Holder
[How is it used?
I use my Scooter for commuting to work, and when I go to a different place, I thought it would be convenient to have a smartphone navigation system, so I was looking for a variety of attachments, etc. I found this product, which seemed cheap and easy to install, and bought it.
It is for PCX160, but I think it is possible to install a large body if it is a Scooter, such as a type that is co-tightened to Mirror.
Was the one you received as per Image?
The quality of the product itself is commensurate with the price.
How was your experience with it?
The screws on the Clamp that hold the Mount Bracket and bar together often loosen, so I think it would be more stable if they were tightened with a very high torque.
Then, I had to change the angle several times until I got it to the best position on my phone. It took time to find the right angle.
View detail
Fits: KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000
Firmly.
14mWrench for Mirror removal is a quantity.:I was unprepared for the 2pcs, but the work itself was easy, and the Smartphone Holder and Camera were also fixed perfectly. View detail
Cannot be installed. Cannot be used.
After I received the product, I tried to install it at a later date, but I don't know if there are different screws in the parts or what, but anyway, the screws are not tightened or fixed. The screw keeps turning. When I looked at it carefully, I found that there were only 4 screws in it and no parts to fix it, and there were only holes in the body.
What's going on?
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
It is easy to install.
Installation is extremely easy.
If the ETC Wiring is done properly, it can be installed in 10 minutes.
The dissatisfaction point is a little rattling because there is some rattling in the body and the lid part of Case.
I put it on my wife's Rebel, and I put Tape in the gap at the Level that I don't mind at all while driving.
The price is right for this type of product.
View detail
Wide space for installation
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
It is easy to position after temporarily fixing all parts
How was your experience with it?
Quantity at the front.:It is not suitable for those who frequently look at the phone because it is set and the line of sight is turned downward for safety.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not very classy.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It can be used as an attachment bracket for various things.
Smartphone Holder and Power Supply Unit of SYGN HOUSE are installed.
I'd like to install ActionCam and Radar if I put it on One Side already.
View detail