Reviews
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
Thanks to the inventor!
[How is it used?
2.Purchased to put a 2.3Meter Motorcycle in a 5Meter wide place.
I mean, if it weren't for this kind of product, I might have abandoned the purchase of Motorcycle...
Was the one you received as per Image?
It was as strong and well made as the Image.
How was your experience with it?
It can smoothly move a 260Kg motorcycle and is a satisfactory product.
[Points to note]
Quantity on front wheel:If you want to set and move the device, you cannot make it Smooth until you learn the hang.
Adjust the direction of the front wheels so that both rollers of the Motorcycle Mover are grounded and can turn Smoothly.
Other items that would be helpful
Depending on the shape of the Side Stand, the orientation of the Stand Mover may not be stable.
View detail
Exactly?
I installed this on a WorldWalk Dax125 OEM color Rear box. It is expected that the Wound will not stick to the Helmetetc. that is put inside. Just be careful with the Velcro as it can get caught. View detail
GIVI E470 and CinderellaFit!
Anyway, it is cosmetic! That's all there is to it.
Box of GIVI in my case E470. The WorldWalk Inner was installed on the
I arrived here with a lot of information, and I would like to send my admiration to our predecessors for their TRY.
Without innerwear, boxes gradually rub against each other, and then sand and other substances accumulate and rub directly against the luggage, causing damage to both sides again.
I used to use a non-slip sheet or something like that, but I switched to a GIVI E470 when I switched to a motorcycle, so I went through various searches and found this product.
*Use for 48Liter
The cost performance is the best. Above all, the cost performance.
It is not a perfect fit, but it can be used without any problems. It is not necessary to use all of the Magic tape provided.
I think it works well enough with just a Point in a good spot. I used all of them without thinking and somehow regretted it.
Motorcycles are subject to a lot of vibration, which can ruin luggage and cause scratches and scuffs, so it is better to have a protective inner like this.
This product is made of Black fabric and SpongeUrethane on the back side, and can be washed by putting it in Net.
However, as I imagine, urethane sponge should gradually deteriorate, so I think it would be better to replace it as soon as it deteriorates.
It will hydrolyze and fall apart....
View detail
Cute Up
I was torn between a black box from GIVI and a black box from GIVI, but I chose the cuteness. View detail
Box set
Very easy to use BoxSatisfied! View detail
Another Option, but I think this is Mast if you buy the Box!
The company's product 32-Litre 2-Colors Lens Rear Box Exclusive (When I purchased the Rear Box (hwb-32), I read the manufacturer's description and thought it would be better to have it, so I bought it at the same time.
The inner cushioning of the inner cushion is moderate, and the exclusive design allows the inner cushion to fit almost perfectly to the complex unevenness of the inside of the inner cushion. As you can see in the image, even though it is fixed with Velcro in several places, there are still gaps. Just fit." It is not so much that it is a problem, but it is not so much that it bothers me.
Anyway, without such an Inner, the contents will be scratched and it will rattle noisily, so I think it is a must. But cheap!
View detail
I would give it about 7 stars.
It was initially installed on a PCX, then switched vehicles and installed on a VINO.
There are many famous manufacturers such as GIVI and SHAD, but the most important point of this product is that the lid can be opened and closed without key lock. This is the information at the time of my purchase, and other manufacturers may have improved their products, but at least at that time, GIVI boxes could not be closed without using a key lock.
This means that a person like me, who carries a motorcycle key and a box key attached to each other, has to stop the car, remove the key from the Cylinder, go to the rear with the key, open the box, take out its contents, close the box with the key, go to the front again with the key, and insert the key into the Cylinder. I have to go backward with the key, open the box, take out the contents, close the box with the key, go forward again with the key, insert the key into the Cylinder, and so on. This is a life-and-death problem for me because I am a lazy person.
On the other hand, this one can be opened and closed with no lock, or locked only when away from the motorcycle for long periods of time or when valuables are stored in it.
The inner cushion is equipped with the manufacturer's exclusive inner cushion, so the contents are not damaged at all. I have replaced the red reflector, which is common in boxes, with a Clear Lens from Standard Equipment.
Anyway, the product is easy to use, sturdy, and inexpensive.
View detail
It comes in handy
This is my impression after using it for more than a year after purchase. At first I was a bit nervous about handling it, but once I got used to it, I could move it to the position I wanted in one shot.
The STAND may or may not be able to move smoothly depending on how it is inserted, but once you get used to it, you will understand the hang and now it has become an indispensable product.
I installed the Side Stand side Mover in the wrong direction, which caused the Side Stand to go up, almost tipping it over (this was the first time, but not the first time). Also, does it depend on the vehicle?
View detail
Mount bar
In the summer, the cell phone is free to shift, so we installed a mount bar to accommodate the GARMIN Navigation system. View detail
First replacement in 5 years
[How is it used?
I have been using it for 5 years and it is getting old, so I bought a new one.
Was the one you received as per Image?
Five years ago, rounded boxes were in vogue, but now square boxes seem to be in vogue.
Was the installation difficult?
It was installed without any problems.
How was your experience with it?
The old box was 30L, but this time it is 32L, which is large enough to hold a lot of luggage and is very useful.
[Included Parts:were they on?
It came with it, but you may not need it!
[Was there anything that disappointed you?
Mounting Bolt is long, so when installed, the bolt is visible from the back and does not look good.
The old box had an underlay, but this time there was nothing, it was naked.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Also Exactly in the Inner of GIVI's BOX
It is for a WorldWalk box, but I bought it as Cushion material for a GIVI 47L box.
I used to modify a soft case to carry a NotebookPC and put it on the bottom, but with this Inner, the shape is Exactly from the beginning, and if you can buy it for this Gold amount, this one is definitely a better value.
TOPCase, such as GIVI, without an inner case, things will slide around inside and move, so it is a good idea to have an inner case to prevent scratches on the case itself and to prevent damage to the things you put inside.
The material of the inner material could be a little more luxurious, but since it is a balance with the price, it can't be helped.
View detail
Great product!
Great product! Excellent fit and finish. Easy to install. Instructions in Japanese but you can use Google Lens to translate with your phone. Fits the 2020 USA spec (look at tail light/rear turn signals!) C125 Super Cub very well and even allows you to keep the Honda package rack (if installed). Sits pretty high, but my wife says it does not seem to affect the bike's performance or handling. Easily stores my XXL Shoei Qwest helmet with room to spare. First purchase from Webike, they communicate very well and exceeded my expectations on shipping. I will be purchasing more from Webike. View detail
revelation
Large is useful for narrow garages. Women need a little practice when starting to use it. It is recommended to use it after practicing in a wide space. View detail
I still need … Smartphone Navigation!
What made you decide to buy?
Before I installed the KawasakiOEMOption Steering Damper on my ZX-6R, I had installed a KIJIMA Handlebar Mount Bracket, but it interfered with the Steering Damper. After considering alternatives to KIJIMA's Mount Bracket, we decided to use KIJIMA's Mount Bracket. WorldWalk:Smartphone Mount bar I met and purchased the product.
How was your experience with it?
Before purchasing, I was disappointed that there was not enough information about the WorldWalk:Smartphone Mount Bar for 6R. I have been using it to hold my cell phone for a long time. I used to use "Oxford:I installed the "Clicker /Handlebar Mounting for Motorcycle" and it is firmly in place and does not interfere with anything else. The OEMMeter is also clearly visible, although the phone can only be mounted sideways.
Unlike KIJIMA's Handlebar Mount Bracket, this bracket is mounted in the upward direction. I was impressed by the manufacturer's skill in measuring the mounting position to maintain a subtle clearance, but there were some disappointing points. The paint job of the bar clamp is perfect, but the finish of the HolderBody is a little bit rough. I thought that it was probably manufactured by a certain Large land … manufacturer. (As a personal opinion)
Regarding installation …]
Remove the OEMHandlebar clampBolt. Once removed, use the supplied aluminum collars to attach the bracket for fixing the holder. This is where the ad-vise comes in. The included M8 bolt is used to secure the bracket and aluminum collar, but if the bolt is tightened at the specified torque, the bracket will move to the tightening side, which will affect later work. First of all, set the quantity:Pair (for Left and Right) The Bracket for fixing the Holder on the left side is temporarily fixed. Next, temporarily fix the Holder to the Bracket for fixing the Holder and attach the bar. (At this time, there are two washers for the Holder. Since the clearance is delicate, do not use washers for temporary fixation, but use Bolt only for temporary fixation.) where the bar Quantity:Pair (for Left and Right) position adjustment and fix the bar firmly to the Holder. (The bar has a hole for drainage! I am at this time using theQuantity:Pair (for Left and Right) and adjusted the bar so that the hole for drainage faces down). After adjusting the position of the Holder and bar, we left them as they were, and set the Quantity:Pair (for Left and Right) Tighten the holder fixing bracket of the "2" at the specified torque. Finally, use the two washers that were removed from the bracket for fixing the holder at the position specified in the Instruction Manual, and tighten the holder with the specified torque. This work was a little difficult because there was not enough information about the WorldWalk:Smartphone Mount bar for 6R in advance, but the work was completed without any trouble. WorldWalk:Smartphone Mount bar is recommended.
View detail
Satisfied
I bought it because I moved to a new house and my parking space was getting smaller. I use it on my ZEPHYR750. I use it on my ZEPHYR750 and recommend it to short women who are not strong to practice many times to get the hang of it. View detail
thank you for good product
It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. do View detail